CHAUVET DJ 4BARFLEXQILS Flex Q RGBA LED Wash System User Guide

June 14, 2024
Chauvet DJ

CHAUVET DJ 4BARFLEXQILS Flex Q RGBA LED Wash System

Safety Notes

These Safety Notes include important information about the installation, use, and maintenance of 4BAR Flex Q ILS.

  • ALWAYS:
    • Connect to a grounded circuit.
    • Connect to operating voltages as specified on the product’s spec sticker.
    • Disconnect from power before replacing the fuse.
    • Disconnect from its power source during periods of inactivity.
    • Use a safety cable when suspending overhead.
    • Heed all restrictions and warnings on the spec sticker.
    • Mount in a location with at least 20 in (50 cm) of ventilation.
    • Replace the fuse with the same type and rating.
    • In the event of a serious operating problem, stop using it immediately.
  • DO NOT:
    • Open this product or attempt any repairs. It contains no user-serviceable parts.
    • Look at the light source when the product is on.
    • Use if the power cord is crimped or damaged.
    • Disconnect by pulling on the power cord.
    • Allow flammable materials close to the product when it is operating.
    • Touch the housing when it is on.
    • Block any ventilation holes/slots in the housing.
    • Connect to a dimmer or rheostat.
    • Carry the product by its power cord.
    • Operate in temperatures higher than 104°F (40°C).
    • Expose to environments that exceed the Ingress Protection (IP) rating.
    • Expose to rain or moisture.
    • Use outdoors.
    • Submerge.
    • Expose to corrosive environmental conditions such as temperature, humidity, salinity, pressure, radiation, or shock

FCC Statement of Compliance

This device complies with Part 15 Part B of the FCC rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

What is Included

  • Carrying bag
  • Wireless Footswitch
  • IRC-6 Remote
  • Quick Reference Guide

Control Panel Description

Button/Function

  • Exits from the current menu or function
  • Navigates upwards through the menu list and increases the numeric value when in a function
  • Navigates downwards through the menu list and decreases the numeric value when in a function
  • Enables the currently displayed menu or sets the currently selected value into the selected function

ILS Connection
The 4BAR Flex Q ILS uses the DMX data connection and the D-Fi USB for wireless connection to the Integrated Lighting System (ILS) ecosystem (patent pending). For more information about configuring the 4BAR Flex Q ILS into ILS mode, please refer to the User Manual available at www.chauvetdj.com

Scan

Scan the QR code to warranty ers, and the complete User Manual

Contact Us

Technical Support

Chauvet U.K.

Address: Pod 1 EVO Park
Little Oak Drive, Sherwood Park Nottinghamshire, NG15 0EB UK

Vik real. lo wo rate e, Get any or Beneut, contact the dealer of reactions to request support. Outside the U.S.,

4BAR Flex Q ILS QRG ML6 Rev. 4
© Copyright 2023 Chauvet
All rights reserved

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Chauvet DJ User Manuals

Related Manuals