EDIFIER WH700NB Wireless Noise Cancellation Over Ear Headphones Instruction Manual

EDIFIER WH700NB Wireless Noise Cancellation Over-Ear Headphones

Specifications

• Model: WH700NB
• Type: Wireless Noise Cancellation Over-Ear Headphones
• Power ON/OFF Indicator: Green LED for Power ON, Red LED for Power OFF
• Pairing Indicator: Red and Green LEDs blink alternately
• Reset Indicator: Red and Green LEDs blink alternately
• Charging Indicator: Red LED for charging, LED off when fully charged
• Controls: Power key, Reset key
• Input: 5V 1A

Product Usage Instructions

Power ON/OFF:

• To power ON the headphones, press and hold the Power key for about 3 seconds until the green LED blinks. To power OFF the headphones, press and hold the Power key for about 3 seconds until the red LED blinks.
  Note: If there is no Bluetooth connection and the headphones are not in noise cancellation mode, they will power off automatically in 5 minutes. If there is no Bluetooth connection and the headphones are in noise cancellation mode, they will power off automatically in 4 hours.

Pairing:

Pairing for the first time:

1. Power off the headphones.
2. Press and hold the Power key for about 3 seconds. The red and green LEDs will blink alternately.
3. Select “EDIFIER WH700NB” in the Bluetooth device settings to connect. The green LED will blink twice in 5 seconds when successfully paired.

Pairing for new device:

1. Power on the headphones.
2. Press and hold the Power key for about 3 seconds to skip the latest connected device and pair it with a new Bluetooth device. The red and green LEDs will blink alternately.
3. Select “EDIFIER WH700NB” in the Bluetooth device settings to connect. The green LED will blink twice in 5 seconds when successfully paired.

Note: For subsequent use, the headphones will automatically connect to the last device used.

Reset:

To reset the headphones, press and hold both the Power key and Reset key simultaneously for about 5 seconds when powered on. Wait for the green LED to blink 6 times, indicating that the Bluetooth pairing records have been cleared and the headphones have re-entered Bluetooth pairing mode. The red and green LEDs will then blink alternately.

Dual-device connection:

1. Pair Bluetooth device A with the headphones. Once the pairing is successful, keep the headphones powered on.
2. Press and hold the Power key for about 3 seconds to re-enter Bluetooth pairing mode. The red and green LEDs will blink alternately, and device A will be disconnected from the headphones.
3. Select “EDIFIER WH700NB” in Bluetooth device B’s settings to connect successfully.
4. Select “EDIFIER WH700NB” in Bluetooth device A’s settings to connect manually.

Note: When a call comes in, the headphones will automatically switch to the calling device.

Charging:

• Connect the headphones to a power source using the included Type-C charging cable for charging. The red LED will be steadily lit while charging and off when fully charged.
• Note: Do not charge the headphones when there is sweat or other liquids inside the charging port, as this may damage the headphones. Input: 5V 1A

Controls:

• Power key (x1): Press and hold to power ON/OFF the headphones.
• Reset key (x1): Press and hold with the Power key to reset the headphones.
• Noise Cancellation Control (x2): Press and hold to control noise cancellation settings.
• Ambient Sound Control (x1): Press and hold to control ambient sound settings.
• Noise Cancellation Off Control (x1): Press and hold to turn off noise cancellation.
• Note: Default sound control settings are noise cancellation, ambient sound, and noise cancellation off. Download the Edifier Connect App for more customizable control settings.

FAQ:

Q: How do I power ON the headphones?

• A: Press and hold the Power key for about 3 seconds until the green LED blinks.

Q: How do I pair the headphones with a new device?

• A: Power on the headphones and press and hold the Power key for about 3 seconds to skip the latest connected device and pair it with the new Bluetooth device.

Q: How do I reset the headphones?

• A: Press and hold both the Power key and Reset key simultaneously for about 5 seconds when powered on.

Q: How do I control noise cancellation settings?

• A: Press and hold the Noise Cancellation Control keys to adjust noise cancellation settings.

Power ON/OFF

1. Power ON: press and hold the “ ” key for about 3s when powered OFF until the green LED blinks.
2. Power OFF : press and hold the ” ” key for about 3s when powered ON until the red LED blinks.

Note:

1. If there is no Bluetooth connection when the headphones are powered on but not in noise cancellation mode, the headphones will power off automatically in 5 minutes.
2. If there is no Bluetooth connection when the headphones are powered on and in noise cancellation mode, the headphones will power off automatically in 4 hours.

Pairing

Pairing for the first time

1. Press and hold the ” ” key for about 3s when powered off. Red and green LEDs will blink alternately.
2. Select “EDIFIER WH700NB” in the Bluetooth device setting to connect. The green LED will blink twice in 5 seconds when successful.

Pairing for the new device

1. Press and hold the ” ” key for about 3s when powered on to skip the latest connected device and pair it with the new Bluetooth device. Red and green LEDs will blink alternately.
2. Select “EDIFIER WH700NB” in the Bluetooth device setting to connect. A green LED will blink twice in 5 seconds when successful.

Note:
For subsequent use, the headphones will automatically connect to the device used last time.

Reset

• Press and hold the ” +” and ” -“ keys simultaneously for about 5s when powered on. Wait for the green LED to blink 6 times to clear the Bluetooth pairing records and re-enter Bluetooth pairing mode. The red and green LED will then blink alternately

Dual-device connection

1. Pair Bluetooth device A with the headphones. Upon the pairing is successful, keep the headphones powered on, then press and hold the “ ” key for about 3s to re-enter the Bluetooth pairing mode, The red and green LED will blink alternately, meanwhile, device A is disconnected from the headphones.
2. Select “EDIFIER WH700NB” in Bluetooth device B’s setting to connect successfully.
3. Select “EDIFIER WH700NB” in Bluetooth device A’s setting to connect manually.

Note:

1. When a call comes, the headphones will automatically switch to the calling device. After the call ends, the headphones can switch back to the original device.
2. The voice assistant can be enabled on the latest active smartphone if two smartphones are paired with the headphones simultaneously.
3. Switching from device to device: pause music on the current device, and start playing audio on the second device you would like to switch to.
4. Each time when powered on, the headphones will automatically reconnect with the two most recently connected devices if available within the effective Bluetooth range.

Charging

1. Please connect the headphones to the power source with the included Type-C charging cable for charging.
2. The red LED is steadily lit when charging and off when fully charged.

Note:
Please do not charge the headphones when there is sweat or other liquids inside the charging port, which may damage the headphones.
Input: 5V 1A

Controls

Note:

1. Press and hold.
2. Default sound control: noise cancellation & ambient sound & noise cancellation off.
3. Images are for illustrative purposes only and may differ from the actual product.
4. Download the Edifier Connect App for more customizable control settings.

For more information, please visit our website:www.edifier.com

• Model: EDF200126
• Edifier International Limited
• P.O. Box 6264
• General Post Office
• Hong Kong
• www.edifier.com
• 2023 Edifier International Limited. All rights reserved.
• Printed in China
• NOTICE:
• For the need for technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice.
• Products of EDIFIER will be customized for different applications. Pictures and illustrations shown in this manual may be slightly different from the actual product.
• If any difference is found, the actual product prevails.
• Wireless Noise Cancellation Over-Ear Headphones

References

• Headphones, Speakers | A Passion for Sound -【Edifier USA】

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>