Club 3D CAC-1307 HDMI Active 4K60Hz Repeater Installation Guide
- June 14, 2024
- Club-3D
Table of Contents
Club 3D CAC-1307 HDMI Active 4K60Hz Repeater
Thank You
Thank you for purchasing our CAC-1307 Product. After unpacking the product, please make sure you have all the items provided and checked for any damages. In case of any missing/damaged parts please inform your supplier immediately.
USB 2.0 Type-A to Micro USB Cable of 1 m / 3.28 ft is included.
You should have
- 1x CAC-1307 HDMI™ Active 4K60Hz Repeater F/F
- 1x USB 2.0 Type-A to Micro USB Cable of 1 m / 3.28 ft(for External Power)
- QR Code for downloading the Quick Install Guide (QIG)
The Club 3D CAC-1307 HDMI™ Active 4K60Hz Repeater extends the length of any HDMI™ cable by regenerating the HDMI™ signal before it sends the outputs to the HDMI™ monitor or projector. The active HDMI™ repeater will clean out the digital noise (sparkles) in your picture. The input of the HDMI™ active repeater is connected with a long HDMI™ (male to male) cable from the HDMI™ device like DVD player or Satellite set top box with a HDMI™ output port. The HDMI™ active repeater output is connected to a second HDMI™ (male to male) cable to go from the output to any HDMI™ display or projector with a HDMI™ connector. The unit is placed as near as possible to the display(max. distance 5 m/16.4 ft) to remove any noise that has been generated by a long HDMI™ cable.
Operation Procedures
- Connect the HDMI™ source and HDMI™ display respectively to the input and output ports of the product through HDMI™ Male / Male cables.
- Connect a DC 5V power adapter to the micro USB port of the product with the supplied USB2.0 Type-A to Micro USB Cable.
Features
- Support HDMI™ resolution up to 3840×2160@60Hz or 4096×2160@60Hz(depending on the source used)
- Support 600MHz/6Gbps per channel (18Gbps all channels) bandwidth
- Support 12bit per channel (36bit all channels) deep color
- Support RGB 4:4:4/YCbCr 4:4:4/ YCbCr 4:2:2/ YCbCr 4:2:0
- Support 3D, HDR
- Support HDCP 2.2&1.4
- Support 5V power supply through Micro USB port(cable included)
Tested supported Max resolutions & Cable lengths:
- Max 15m/49.21ft CAC-2312 + CAC-1307 + CAC-2313
- Max 25m/82.02ft CAC-1375 + CAC-1307 + CAC-1379
- Max 40m/131.23ft CAC-1379 + CAC-1307 + CAC-1379
- 3840×2160@60Hz, 4096×2160@60Hz (depending on the source & Cables used)
Note:
- Please update your TV Firmware to the version which supports these resolutions/refresh rates !
- Please update your Graphic drivers on your PC and make sure that DSC1.2 is supported on your devices to support the these resolutions/refresh rates!
- Please use one of our Extension/Adapter cables to connect to your devices: In case you need assistance to choose the correct cable, please visit our website www.club-3d.com or feel free to mail us at support@club-3d.com and it will be our pleasure to assist you.
- Warning Safe Usage – Product Only to be used at altitude 2000 meters/6562 feet and below
Disclaimer: While we endeavour to provide the most accurate, up-to-date information available, the content on this document may be out of date or include omissions, inaccuracies or other errors. Products might obtain a certification during their lifetime. This doesn’t change or alter the product specifications and/or performance in any way. Club 3D will provide the updated information on their website www.Club-3d.com at her discretion. Therefore Club 3D does not accept any rights claimed on the content of this document. Please refer to a full overview of our Legacy Terms and Conditions on www.club-3d.com. All other brand names are trademarks or registered trademarks and are the property of their respective owners. All content is subject to change without prior notice.
Customer Support
CAC-1307 QIG October-2023
Copyright © 2023, Club 3D B.V.
www.club-3d.com
Documents / Resources
| Club
3D CAC-1307 HDMI Active 4K60Hz
Repeater
[pdf] Installation Guide
CAC-1307 HDMI Active 4K60Hz Repeater, CAC-1307, HDMI Active 4K60Hz Repeater,
Active 4K60Hz Repeater, 4K60Hz Repeater, Repeater
---|---