XINJI M2 Stone TWS Earbuds User Manual
- June 14, 2024
- XINJI
Table of Contents
Scan the QR code to get multilingual user manual.
http://www.xinjismart.com/support/download
STONE M2 TWS EARBUDS
USER MANUAL
Packing list
Specifications
Product model: STONE M2
Wireless Version: 5.3
Distance: 10M
Speaker Impedance: 32Ω±10%
Frequency: 20Hz-20KHz
Speaker receiving sensitivity:
106±3dB| Play time: about 8 hours
(60% of the volume)
Stand time: about 200 hours
Charging time: about 2 hours
Charge interface: Type-C
Battery capacity:
300mAh for charging case
---|---
Please read the instructions before use
- Keep the product away from extremely hot and cold environments, it will damage the battery and circuit.
- Avoid liquid immersion into the product.
- Do not disassemble the product.
- Do not use concentrated chemical products or detergents to clean the product.
- Use only 5V/1A power supply. Connecting the power supply voltage too high may cause serious damage.
- Do not randomly discard or place the product near fire or high temperature to avoid the danger of explosion.
Problem handling
- Can be connected but there is no sound: Click the right earbuds to increase the volume.
- One of earbuds cannot be charge: Clean the charging contact of the earbuds and the charging case.
- One of the earbuds cannot be connected: Reset the earbuds.
- lf the earbuds cannot be charged, please activate the warranty and contact us for after-sales service.
Please clean the charging contacts of the earbuds and charging case frequently to avoid charging failures.
Method of operation
- Take out the earbuds (Earbuds auto power on).
- After open the phone Bluetooth , Clickthe earbuds name to pairing.
Operation
×1: Click Once
×2: Click 2 times
×3: Click 3 times
2s: Press and hold for 2 seconds
Reset
If earbuds has any connection or function problems, please reset the earbuds.
- Disconnect the earbuds from the phone.
- Perform a 4-tap sequence on the L/R earphones, and power off after hearing the prompt.
- After placing the earphones into the charging case, take them out again, and wait for the earphones to auto-pair.
This manual is for reference only, the actual product may vary. Please refer to the actual product.
Warranty card
Customer information | Seller information |
---|---|
Name | Name |
Add. | Add. |
Purchase Date | |
P.C. | Product model |
Tel | Invoice number |
Date | Malfunction |
www.xinjismart.com
Made in China © 2023 XINJI Smart. All rights reserved.