PELONIS PHT30D7BBC Digital Ceramic Tower Heater Owner’s Manual

: June 14, 2024
: Pelonis

PELONIS PHT30D7BBC Digital Ceramic Tower Heater Owner’s Manual

IMPORTANT SATETY INSTRUCTIONS

When using electrical appliances,basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, and hyperthermia,including the following:

**CAUTION**

Read all instructions before using
Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and
CAUTION: This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of shock, this plug is intended to fit only one way in a polarized If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to defeat this safety feature. To do so could result in an electric shock hazard.
CAUTION: It is normal for the plug to feel warm to the touch; however, a loose fit between the AC outlet (receptacle) and plug may cause overheating and distortion of the plug. Contact a qualified electrician to replace loose or worn
CAUTION: Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or reloadable power tap (outlet/power strip).
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT AND FULLY

WARNING

This heater is hot when in use. To avoid burns, do not let bare skin touch hot If provided, always use handles when moving this heater. Keep combustible materials such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet (0.9m) from the front of the heater and keep them away from the sides and rear.
Always unplug the heater when not in
Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner. Discard heater or return heater to authorized service facility for examination, electrical or mechanical adjustment, or
Do not use the heater
This heater is not intended for use in bathroom, laundry areas and similar moist indoor Never locate heater where it may fall into a bathtub or other water container.
Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or Arrange cord away from traffic area and where it will not be tripped over.
This heater draws 12.5 amps during operation. To prevent overloading a circuit, do not plug the heater into a circuit that already has other appliances
To disconnect the heater, first turn controls to off, then remove plug from Never pull by the cord.
Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the
To prevent a possible fire, do not block air intakes or exhaust in any Do not use on soft surface, like a bed, where openings may become blocked.
A heater has hot and arcing or sparking parts Do not use it in the areas where gasoline, paint, or flammable liquids are used or stored.
Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to
The output of this heater may vary and its temperature may become intense enough to burn exposed Use of this heater is not recommended for persons with reduced sensitivity to heat or an inability to react to avoid burns.
Hyperthermia can result in death. Symptoms of hyperthermia include high body temperature, headache, nausea, vomiting, tiredness, dizziness, fainting, and rapid pulse. If you begin to experience symptoms related to hyperthermia, turn off the heater and seek medical
To avoid excessive room temperatures which can cause hyperthermia: DO NOT leave product running unattended in a confined space around infants, or individuals with reduced physical, sensory, or mental

SAVE THESE INSTRUCTIONS

SPECIFICATIONS

PRODUCT OVERVIEW

Part Name

NOTE

All the pictures in this manual are for explanation purposes only. Any discrepancy between the real object and the illustration in the drawing shall be subject to the real model

OPERATION INSTRUCTION

Check Before Turning On The Machine

Check if the power cord is under good
The product adopts 120V AC power supply, before use, please confirm if the rated current of the power socket meets the local requirements with safe grounding device, otherwise, please replace it with the qualified

Panel Operation & Display

Additional Functions

Forced shutdown function
If the machine keeps running for 15 hours without any operation, it will automatically shut down
Temperature sensor short circuit, open circuit protection function
No matter in what mode, the temperature sensor appears short circuit or open circuit, digital screen displays “E1” or “E2” and constantly flicker, while any key operation is invalid and the buzzer rings 10 times.

Safety protection

When power on, if the room temperature TH is above 50°C , machine will close all outputs system, The digital screen will show “FF” and flash 1 time per second in 75 times, press any key will not work, only plug off to stop the protection.

Tip-over switch

As a safety measure, the display area will show “P4” and unit will shut off automatically if it is knocked over. Should this occur, simply turn the heater off and stand it back up to a regular upright posit ion, then switch it back on.

ECO energy saving function

Select the ECO energy saving gear and set the temperature. The heater will adjust its heating gear by comparison between the ambient temperature and set temperature.

Remote Control

Use of the remote controller: the key functions are basically the same as the body operation
Control range of remote controller The remote controller control can be normally used within 5 meters in front of the product and in the left and right angles of 30

NOTE

Please use a manganese or alkaline battery of type “AAA” and do not use a non-recy- clable
Do not mix old and new

Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc.) batteries

CLEANING AND MAINTENANC

It is recommended that the heater be cleaned at least one time during the operating season in order to provide the optimum level of performance. ALWAYS TURN THE POWER SWITCH OFF AND UNPLUG THE HEATER BEFORE CLEANING. Be sure to save

the box for off-season storage.

Turn the heater “OFF” , unplug it and wait for the heater to cool
Use a dry cloth to clean only external surfaces of the
Do not use any cleaning agents or
Never immerse the heater in
Pack the heater in the original carton and store it in a cool and dry
Any other maintenance shall be performed by an

WARNING

This heater cannot achieve accurate temperature control of the enviroment, and thus cannot be used as insulation device for storage environment, items, animals and plants.

TROUBLESHOOTING

If the product does not operate or does not operate properly, first check according to the following list. If the reason the product does not operate or does not operate properly is not included in the following list, the product mayhave failed. At this time, it is recommended to send the product to the dealer for treatment.