PELONIS PSH23FT3DSBC 2 In 1 Turbo Heater Fan Owner’s Manual

PELONIS PSH23FT3DSBC 2 In 1 Turbo Heater Fan

Product Information

Specifications

Product Overview

• Control Panel
• Power Indicator Light
• Safety Grille
• Base

Product Usages Instruction

Operation Instructions

Check Before Turning On The Machine
Ensure that the current of the power socket meets the local requirements with a safe grounding device. If not, replace it with a qualified socket.

Panel Operation & Display

• Display area: Shows the timer and temperature setting.
• Timer: Allows you to set a specific time for the machine to turn on or off.
• Temperature setting: Adjusts the desired temperature.
• ON/OFF Mode: Controls the power on and off.

Air Flow Direction Adjustment
The unit is equipped with a pivoting head that allows you to select 5 different desired angles for air flow direction.

Safety Protection
If the temperature sensor has a short circuit or open circuit, the digital screen will display E2 or E1 and constantly flicker. In this case, any key operation is invalid and the buzzer will ring 10 times.

Cleaning and Maintenance
Regularly clean the product to ensure optimal performance. Refer to the user manual for detailed cleaning instructions.

Troubleshooting
If the appliance encounters errors or malfunctions, refer to the following table for possible causes and solutions:

inserted into the
outlet.
The unit suddenly stops.| The unit may have overheated.| Unplug the unit and let it cool down. Once cooled, plug it back
into the outlet.

Service and Support
Contact Midea America (Canada) Corporation for service and support:

• Address: 215 Shields Ct Unit #2, Markham, ON L3R 8V2
• 1-Year Limited Warranty

FAQ

• Q: How do I adjust the temperature on the heater?
  A: Use the temperature setting buttons on the control panel to adjust the desired temperature.

• Q: Can I use an extension cord with this product?
  A: No, it is recommended to always plug the heater directly into a wall outlet and not use an extension cord.

• Q: What should I do if the unit stops working suddenly?
  A: First, unplug the unit and let it cool down. Once cooled, plug it back into the outlet and try turning it on again.

Warning Notice:

• Before using this product, please read this manual carefully and keep it for future reference. For additional support, please call customer service at 1-866-646-4332.
• The design and specifications are subject to change without prior notice for product improvement. Consult with your dealer or the manufacturer for details.

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, injury to persons, and hyperthermia, including the following:

• Read all instructions before using this heater.

CAUTION

• Please read and save these important safety instructions. This heater is not intended for use in bathrooms, laundry areas, and similar moist indoor locations. Never locate the heater where it may fall into a bathtub or other water container.
• CAUTION: This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit only one way in a polarized outlet. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to defeat this safety feature. To do so could result in an electric shock hazard. This heater draws 12.5 amps during operation.
• To prevent overloading a circuit, do not plug the heater into a circuit that already has other appliances working.
• CAUTION: It is normal for the plug to feel warm to the touch; however, a loose fit between the AC outlet (receptacle) and plug may cause overheating and distortion of the plug. Contact a qualified electrician to replace loose or worn outlets.
• To disconnect the heater, first turn the controls off, then remove the plug from the outlet. Never pull by the cord.
• CAUTION: Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or reloadable power tap (outlet/power strip).
• This heater is hot when in use. To avoid burns, do not let bare skin touch a hot surface. If provided, always use handles when moving this heater. Keep combustible materials such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9m) from the front of the heater and keep them away from the sides and rear.
• Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
• Always unplug the heater when not in use.
• Do not operate any heater with a damaged cord or plug or after the heater malfunctions, or has been dropped or damaged in any manner. Discard the heater or return the heater to an authorized service facility for examination, electrical or mechanical adjustment, or repair.
• Do not use the heater outdoors.
• Do not run a cord under the carpeting. Do not cover the cord with throw rugs, runners, or similar coverings. Do not route the cord under furniture or appliances. Arrange the cord away from the traffic area so that it will not be tripped over.
• Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
• To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use it on a soft surface, like a bed, where openings may become blocked.
• A heater has hot and arcing or sparking parts inside. Do not use it in the areas where gasoline, paint, or flammable liquids are used or stored.
• Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
• The output of this heater may vary and its temperature may become intense enough to burn exposed skin. Use of this heater is not recommended for persons with reduced sensitivity to heat or an inability to react to avoid burns.
• Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
• Hyperthermia can result in death. Symptoms of hyperthermia include high body temperature, headache, nausea, vomiting, tiredness, dizziness, fainting, and rapid pulse. If you begin to experience symptoms related to hyperthermia, turn off the heater and seek medical attention.
• To avoid excessive room temperatures which can cause hyperthermia: DO NOT leave the product running unattended in a confined space around infants, or individuals with reduced physical, sensory, or mental capabilities.

SAVE THESE INSTRUCTIONS

SPECIFICATIONS

PRODUCT OVERVIEW

Part Name

NOTE

• All the pictures in this manual are for explanation purposes only. Any discrepancy between the real object and the illustration in the drawing shall defer to the real product.
• The machine is equipped with a pilot indicator that glows whenever the heater is plugged in and turned on.

OPERATION INSTRUCTIONS

Check Before Turning On The Machine

• Check if the power wire is in good condition.
• The product adopts a 120V AC power supply, before use, please confirm if the rated current of the power socket meets the local requirements with a safe grounding device, otherwise, please replace it with a qualified socket.

Panel Operation & Display

Air Flow Direction Adjustment

The unit is equipped with a pivoting head and you can select 5 different desired angles.

NOTE

• When the unit is set to the low heat speed and the desired tilt angle is 38°, 53°, or 75°, it will automatically switch to the high heat speed.
• When making the adjustment, do not place your hand on the safety grille, to prevent injury.

Protection When the Temperature Sensor has a short circuit or open circuit
No matter in what mode, the temperature sensor appears short circuit or open circuit, the digital screen displays “E2” or “E1” and constantly flickers, while any key operation is invalid and the buzzer rings 10 times.

Safety Protection

• In the start state, when the room temperature TH is above 55°C, it will turn off all EN output systems. The digital screen displays “FF” and flashes 1 time per second, power the device down to force exit.
• When the unit is in working mode, if the internal temperature of the unit exceeds the thermal cut-off threshold, it will automatically stop working. In this situation, both the digital screen and lamp will turn off. Pressing any key will have no effect. To resolve this, manually unplug the machine and wait for it to cool down. Once cooled, plug it back into the outlet again to restart the unit.

CLEANING AND MAINTENANCE

It is recommended that the heater be cleaned at least one time during the operating season in order to provide the optimum level of performance. ALWAYS TURN THE POWER SWITCH OFF AND UNPLUG THE HEATER BEFORE CLEANING. Be sure to save the box for offseason storage.

• Turn the heater “OFF”, unplug it, and wait for the heater to cool down.
• Use a dry cloth to clean only the external surfaces of the heater.
• Do not use any cleaning agents or detergents.
• Never immerse the heater in water.
• Pack the heater in the original carton and store it in a cool and dry place.

TROUBLESHOOTING

The appliances may encounter some errors and malfunctions, the following tables contain possible causes and notes for resolving an error or malfunction.

it into the outlet again.

SERVICE AND SUPPORT

In the event of a warranty claim or if service is required for this product, please contact us at the following:

• Toll Free: 1-866-646-4332
• For questions or comments, please write to:
  Midea America (Canada) Corporation 215 Shields Ct Unit #2, Markham, ON L3R 8V2

For your records, staple your sales receipt to this manual and record the following:

• DATE OF PURCHASE:
• PLACE OF PURCHASE:

(STAPLE SALES RECEIPT HERE)

NOTE:
PROOF OF PURCHASE IS REQUIRED FOR ALL WARRANTY CLAIMS

PRINTED IN CHINA.

1-YEAR LIMITED WARRANTY

Please read all the instructions before attempting to use this product

Midea America Corporation warrants as limited herein to the original purchaser of retail that each new Fan Heater, shall be free of defects in material and workmanship for a period of one (1) year from the date of original purchase. This one (1) year warranty is limited to the Motor and Electric Element.

In the event of malfunctions or failure of your Fan Heater, simply deliver or send the Fan Heater, postage prepaid along with PROOF OF PURCHASE, within the warranty of one(1) year, to Midea America Corporation. Midea America Corporation reserves the right to inspect the claimed defective part or parts to determine if the defect or malfunction complaint is covered by this warranty. Midea America Corporation shall, within sixty (60) days after receipt of the product, at its option, repair and/or replace the defective part or parts free of charge. This warranty shall only cover defects arising from normal usage. Midea America Corporation assumes no responsibility whatsoever if the Fan Heater should fail during the warranty period by reason of:

• Misuse, negligence, physical damage, or accidents.
• Lack of maintenance (see instructions for proper maintenance).
• Repair by any unauthorized party during the warranty period.
• Damage caused by connection to an improper input voltage (see specification label on your Fan Heater).

Midea America Corporation makes no further warranties or representations, express or implied except those contained herein. No representative or dealer is authorized to assume any other liability regarding the Fan Heater. The duration of the implied warranty granted under State law, including warranties of merchantability and fitness for a particular purpose is limited in duration should the duration of the express warranty grant it hereunder. Midea America Corporation shall in no event be liable for direct, indirect, special, or consequential damages.

Some states do not allow limitations on how long an implied warranty lasts, and/or the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may have other rights which vary from state to state.

References

• home

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>