THORN 96635659 LED Mirror Armature Elsa Varioflex Instruction Manual

: June 14, 2024
: THORN

Table of Contents

THORN 96635659 LED Mirror Armature Elsa Varioflex
Product Information
Product Usage Instructions
Instruction
Specification
What’s In The Box
Installation Instruction
Sensor Settings
Wiring
Detection range
Contact Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

THORN 96635659 LED Mirror Armature Elsa Varioflex

Product Information

Specifications:

SAP Code: 96635659, 96635660, 96635661, 96635662
Model: ELSA VARIOFLEX IP44
Power: 6/9W (for models 450 and 800), 9/12W (for models 930/35/40 and MWS)
Dimensions (LxWxH):
- ELSA VARIOFLEX 450: 450mm x 58mm x 81mm
- ELSA VARIOFLEX 800: 450mm x 58mm x 81mm
- ELSA VARIOFLEX 930/35/40: 600mm x 58mm x 81mm
- ELSA VARIOFLEX MWS: 600mm x 58mm x 81mm
Luminous Flux (LF):
- ELSA VARIOFLEX 450: 393lm
- ELSA VARIOFLEX 800: 393lm
- ELSA VARIOFLEX 930/35/40: 462.5lm
- ELSA VARIOFLEX MWS: 462.5lm
Efficiency Class: E

Product Usage Instructions

Installation:

Before installation, ensure that the power supply is turned off.
Drill 6mm holes at the desired mounting location.
Insert the rubber gasket into the drilled holes to provide a waterproof seal.
Mount the ELSA VARIOFLEX securely using appropriate screws or mounting brackets.
Connect the power supply according to the electrical wiring diagram provided in the user manual.
Turn on the power supply and test the functionality of the ELSA VARIOFLEX.

Operation:
The ELSA VARIOFLEX is designed for motion detection. It uses high-frequency (HF) waves to detect movement within its range. However, please note that reflected HF waves from other transmitters, such as walls, floors, ceilings, or furniture, may affect motion detection.

Maintenance:
Regularly clean the surface of the ELSA VARIOFLEX using a soft cloth and mild detergent. Avoid using abrasive substances or solvents that can damage the product. Ensure that the power supply is turned off before performing any maintenance tasks.

FAQ:

Q: What is the power consumption of the ELSA VARIOFLEX?
A: The power consumption varies depending on the model. The 450 and 800 models consume 6/9W, while the 930/35/40 and MWS models consume 9/12W.

Q: How do I install the ELSA VARIOFLEX?
A: To install the ELSA VARIOFLEX, follow these steps:

Turn off the power supply.
Drill 6mm holes at the desired mounting location.
Insert the rubber gasket into the drilled holes.
Securely mount the ELSA VARIOFLEX using screws or mounting brackets.
Connect the power supply according to the provided electrical wiring diagram.
Turn on the power supply and test the functionality of the ELSA VARIOFLEX.

Q: How do I clean the ELSA VARIOFLEX?
A: To clean the ELSA VARIOFLEX, follow these steps:

Turn off the power supply.
Use a soft cloth and mild detergent to gently clean the surface of the product.
Avoid using abrasive substances or solvents that can damage the ELSA VARIOFLEX.

Instruction

Installation and commissioning may only be carried out by authorized specialists and wired in accordance with the latest IEE electrical regulations or national standards.
Mains power must be switched off before carrying out installation.
The manufacturer shall not be liable for any damage resulting from inappropriate modifications to the luminaire or faulty installation.
Caution, risk of electric shock.
The control gear provides basic insulation between the LV supply and the control circuit.