Julian Bowen COX002 Oak Dining Chair Parts Installation Guide
- August 31, 2024
- JULIAN BOWEN
Table of Contents
COX002 Oak Dining Chair Parts
“`html
Specifications:
- Product: Oak Dining Chair
- Approximate Assembly Time: 1.0hr
- Dimensions: 430mm x 500mm x 907mm
- Version Number: 1.0
- Product Codes: COX002, COX102
Assembly Instructions:
-
Before you start, carefully unpack and lay out all component
parts to check for missing items or damage. -
Contact the retailer if any concerns are identified, providing
order number, details of the issue, product code, and batch
number. -
Check all hardware against the provided list; contact retailer
if any items are missing. -
Avoid using Power Tools during assembly to prevent damage and
warranty invalidation.
Parts Overview:
General Care & Maintenance:
We recommend cleaning with a damp cloth, avoiding household
cleaners and abrasive substances. Do not push or drag the furniture
when moving, especially when fully loaded. Periodically re-tighten
all fixings.
Caring for Your New Oak Furniture:
To remove water or dirty marks, lightly rub in the direction of
the grain with 400 grade wet and dry sandpaper. Avoid coarser
sandpaper. Re-apply oil after sanding to re-seal the surface.
Immediately wipe spills with a dry lint-free cloth. Protect
surfaces from direct sunlight and use mats for plates and glasses
to prevent water marks.
FAQ:
Q: Can I use power tools during assembly?
A: We strongly advise against using Power Tools as it may cause
irreparable damage and void your warranty.
Q: How should I clean the oak furniture?
A: Clean with a damp cloth, avoid household cleaners, and
periodically re-tighten all fixings.
“`
ASSEMBLY INSTRUCTIONS
ApproximateAssembly Time
1.0hr
Oak Dining Chair
People Required to Assemble
Tools Required
430mm
500mm
907mm
Before you start…
Please carefully unpack and lay out all of the component parts to ensure
nothing is missing and to check each component for any obvious damage.
Should you identify any concerns at this stage please contact the retailer
from whom this product was purchased. Please quote your order number, details
of your issue, the product code, and the batch number from the cartons which
will help to resolve your issue as quickly as possible.
Version Number-1.0
Product Code – COX002 COX102
2
Please check all hardware matches the list below. Should you notice any are missing please contact your retailer.
A
6.0x80mm
B
29x12x8mm
C
10x20mm
D
8x30mm
E
32x25x27mm
4x
4x
4x
8x
4x
F
G
H
I
10x16mm
3.5x40mm
3.5x14mm
4x
4x
8x
1x
We strongly advise that you do not use Power Tools, such as drills or electric screwdrivers during the assembly as this may cause irreparable damage and will invalidate your warranty.
3
PARTS
01
06
03 05 03
02 04
Please ensure you carefully check all the pieces, should you have any concerns
please contact the retailer before assembly commences. Please have your order
number, details of the issue, the product code, and the batch number from the
cartons as this will help us to resolve your issue much faster.
4
ASSEMBLY ADVICE Please take the time to carefully read through these
instructions before you commence. Keep these instructions for future
reference. We advise that the product is assembled in the room it is intended
for. We advise that you keep the hardware in a bowl during assembly to avoid
losing anything. We strongly recommend that you keep children away from the
work area. Small component parts could choke a child if swallowed. We
recommend you use a sheet or blanket to protect both floor and product through
the assembly stages. This product is heavy, and we recommend a 2 person lift
to avoid personal injury or damage to theproduct. Never push or pull the
product as this could cause both personal injury or irreparable damage to
product or floor. We have tried to make this piece of furniture easy to
assemble if the instructions are followed carefully. In the unlikely event
that you have problems with assembling the product or have missing or damaged
parts, please contact your retailer and we will assist them in rectifying the
problem as quickly as possible. Please remember we strongly urge you DO NOT
use power tools such as drill or electric screwdrivers as this could cause
irreparable damage to your product and will invalidate your warranty.
5
1
A 4x
C
02 01
2
01
2x
D
D
F
B
I
03
03
05
04
6
3
2x
F
D
B D
I
02
4
H 4x
E
H
06
7
5
4x
G
GENERAL CARE & MAINTENANCE We advise that when cleaning the product that a
damp cloth is used. Avoid the use of all household cleaners and abrasive.
Never push or drag the furniture. Never attempt to move the furniture when
fully loaded. We advise that periodically all fixing are re-tightened.
8
CARING FOR YOUR NEW OAK FURNITURE
Your oak furniture is pre-treated with Becker Acroma furniture oil during
manufacture which helps to protect and nourish the oak. The oiled oak finish
brings out the beauty of the natural oak. This furniture oil will help to
protect the oak from light spills and dirt but over time the layer of oil will
dry out so some ongoing light maintenance is recommended to keep your new
furniture in good condition and more resistant to any liquid spills. We
recommend that a new coat of furniture oil is applied to your oiled oak
furniture at least twice a year but further treatments may be required
depending on the temperature and sunlight in the room that it’s used in. On
some occasions the oil may have started to dry out a little by the time it
gets delivered if the item has been in storage for more than a few weeks so
the product may sometimes benefit from a fresh re oiling soon after delivery.
There are many types of oil that can be used and most good DIY stores will
stock Raw Linseed Oil which is what we recommend that you use. Raw Linseed Oil
has a longer drying time than the boiled variety but it is much safer to use
on dining furniture as it contains no additives. However, always refer to the
manufacturer’s instructions to check suitability. Alternatively, a good
quality Olive Oil will also do a good enough job. The oil is best applied with
the soft side of a kitchen sponge across the surface and then wiped off with
some soft kitchen paper towels to remove the any excess oil that has not been
absorbed around 10 – 15 minutes later. This allows enough time for the oil to
penetrate into the oak and by wiping off the excess oil the surface should be
nice and uniform. Take care to avoid spilling oil onto the floor or chairs
around the table.
Small water marks or any dirty marks on the surface should be possible to be
removed by lightly rubbing in the direction of the grain with some very fine
wet and dry sandpaper for a few seconds (only ever use a 400 grade sandpaper).
Never use a coarser grain of sandpaper. This process can also be used to
reduce raised grain following drying of the oil or moisture absorption. Oil
should then be re-applied as described above to re-seal the surface.
Wipe up any spills immediately with a dry lint free cloth. Direct bright
sunlight and a hot room will speed up the rate at which the oil will dry out
from the oak surface. Always use protective mats for plates, cups and glasses
to remove the risk of water marks.
9
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>