ANKER A2598 3 In 1 Wireless Charging Station Instruction Manual

ANKER A2598 3 In 1 Wireless Charging Station

For FAQs and more information, please visit:anker.com/support

For tutorial videos, FAQs, manuals, and more information, please visit:https://support.anker.com Or scan the QR code below:

INTRODUCTION

Connected to power

The left LED light stays blue for 6 seconds, then turns off|

Charging your phone

The right LED light stays blue for 6 seconds, then turns off|

Charging your earbuds

Flashing blue

| •   Metal objects detected

•   Overvoltage or undervoltage protection

•   Incompatible AC adapter connected, indicating that you need to switch to a Quick Charge 2.0/3.0 or Power Delivery adapter

• You cannot charge your device wirelessly in these scenarios:
  • using a case with a magnetic/iron plate;
  • using a case with a pop socket;
  • using an ultra-thick (> 5 mm) protective phone case.
• Connect the wireless charger to a Quick Charge 2.0/3.0 or Power Delivery wall adapter. Do not connect to a 5V/1A wall charger or a USB port on a computer as it may affect the wireless charging function.
• Do not place any foreign objects between your device and the wireless charger’s surface, including metal pads on a car mount, magnetic cards, door keys, coins, NFC cards or other metal objects, as they could potentially demagnetize the wireless charger, affect the charging speed, or cause overheating.
• Wireless charging products make charging more convenient than wired chargers but confined by current wireless technology, their charging speed is slower than that of wired chargers.
• High temperatures will reduce charging speed and restrict power. It is recommended that you charge your device in environments with temperatures below 40°C / 104°F.

Important Safety Instructions

Please refer to the electrical and safety information on the bottom before installing or operating the product.

• Avoid dropping.
• Do not disassemble.
• Do not expose to liquids.
• This product is suitable for moderate climates only.
• The maximum ambient temperature during use of this product must not exceed 40°C.
• Open flame sources, such as candles, must not be placed on this product.
• Only use a dry cloth or brush to clean this product.

FCC  STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help.

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator & your body.

• Product Name: Anker 335 Wireless Charger (3-in-1 Station)
• Model: A2598

The following importer is the responsible party (for FCC matters only).

• Company Name: Fantasia Trading LLC
• Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
• Telephone: +1 800 988 7973

IC Caution
Radio Standards Specification RSS-Gen, issue 5 This device contains license- exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

RF exposure statement:
The equipment complies with IC Radiation exposure limit set forth for uncontrolled environments. This equipment should be installed and operated with a minimum distance 10cm between the radiator and your body. This product complies with the radio interference requirements of the European Community.

Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2598 is in compliance with Directives 2014/53/EU & 2011/65/EU. The full text of the EU Declaration of conformity is available at the following internet address:
https://www.anker.com/

Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2598 is in compliance with Radio Equipment Regulations 2017 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the GB declaration of conformity is available at the following internet address:  https://www.anker.com This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 20mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or approved antenna.
This device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out. The device complies with RF specifications when the device used at 20cm form your body.

Specifications

Output

| Wireless: 5W / 7.5W / 10W (for phones) 5W Max (for earbuds)

USB-A: 5V 0.6A

Operating Temperature| -10°C – 40°C
Radiated H-Field| 5.14 dB μ A/m(@10m)
TX/RX Frequency Range| 111-205KHz (for EU / UK only)

Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong The following importer is the responsible party (contract for EU and UK matters) Anker Innovations Deutschland GmbH Georg- Muche-Strasse 3, 80807 Munich, Germany Anker Technology (UK) Limited   GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

Customer Service

• 18-month limited warranty
• Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.
• Lifetime technical support
• support@anker.com
• support.mea@anker.com (For Middle East and Africa Only)
• (UK) +44 (0) 1604 936200

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>