SAMSUNG S21 Wireless Charger with Clock User Manual
- June 14, 2024
- Samsung
Table of Contents
Multifunctional Wireless Charging Station
User Manual
Product Overview
Please read this user manual carefully before using this product and keep it properly
- Wireless charging area for smartvaich
- Wirsiess charging area forsmart phone
- Dipiaysereen
- Bighness touch adiusiment
- St phone charging indictor
- Smart watch charging incicator
- Earbuds charging case charging indicator
- Wireless charging area for earbuds charging case
- Time setting”-” button
- Time setting “+” button
- Time setting button
Compatible
Smart phone: All Qi compatible smart phones
Earbuds: All Qi compatible earbuds charging cases
Smart watch: Samsung Watch (For specific compatible models, see pictures or
text descriptions on the website).
User Instruction:
Step 1: Plug in a QC3.0/PD charging adapter. A low-power charging adapter
might not work.
Step 2: Put your phone, earbuds charging case or smart watch on the device for
wireless charging.
Time setting:
- Short press “Time setting button” to select 12/24 hour system.
- Setting the hour: Long press the “Time setting button” for 3 seconds to enter setting mode, adjust time by pressing “+/-” button.
- Setting the minutes: Long press “Time setting button” for 3 seconds, then short press “Time setting button” to enter setting mode, adjust time by pressing “+/-” button.
Note: After setting, wait for 5 seconds to exit setting mode.
Display screen adjustment:
Clicking the brightness touch adjustment icon to adjust brightness of the
display screen. The display screen brightness is adjusted by four levels
cyclic.
| Level position | First level | Second level | Third level | Fourth level |
|---|---|---|---|---|
| Display brightness | Low | Medium | High | Off |
Attention
- This product has a built-in battery t0 provide power or the time display when ot connected to a power source. When the power is exhausted, the time will return 1o the factory state,then you need to reset the time.
- This product hes an inteligent energy-saving function. I the case of not connected 1o the power supply, it will automatically trm off the time display in 10 minutes
Indicator Light Guide
| Charging status | Plugged in | Standby | Charging | Fully Charged | Detected |
|---|---|---|---|---|---|
| Indicator Light | On for 3 Sec | OFF | Green light | Green light | Red light |
flashes
Specification
Input 9V/2 SV/3A
Charging Smart phone Output: 10W/7.5W/SW.
Charging Watch Output: 25W
Charging Earbuds Output W
Charging Standard: Qi Compatible
Important Reminder
- For maximum charging speed, please use a cable and an adapter compatible with QC (Quick Charge) 20/2.0 o PD (Power Deivery) fast charging
- Any phone case orcarbuds cass thicker than Smim il s0p this charge from working properly.
Warning
-
Do not disassemble or change the internal structure of this product by yourself to avoid danger.
-
Please use this product in the temperature range of 0°C -40°C (32°F -104°F ).
Do not use this product in high temperature and humid place to avoid equipment failure. -
Do not place metallic foreign objects in the wireless charging area.
-
Do not throw this product into the fire otherwise may cause the equipment to catch fire or explode.
-
This product contains sensitive electronic components, including a battery, and can be damaged, impair functionality, or cause injury if dropped, burned, punctured, crushed.
-
Do not expose this product to high temperature or around heat generating devices such as heaters, microwave ovens, ovens, etc.
-
Do not allow children or pets to swallow this product to avoid injury or other hazards.
-
Radio waves generated by this product may interfere with pacemakers, defibrillators, or other medical devices. Maintain a safe distance of separation between your medical device and this product. Consult your physician and medical device manufacturer for information specific to your medical device. Stop using this product if you suspect it is interfering with your pacemaker, defibrillator, or any other medical device.
-
Please comply with local regulations for the disposal of this product and its accessories, and support recycling operations.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
IC Statement
This device complies with RSS-216 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.
RSS-Gen Issue 5 March 2019
This device contains licence-exempt transmitter (s)/receiver (s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that maycause undesired operation of the device.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF exposure statement:
The equipment complies with IC Radiation exposure limit set forth for
uncontrolled environment. This equipment should be installed and operated With
minimum distance 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>