MUSK X18PRO QHD Car Dashcam User Guide

MUSK X18PRO QHD Car Dashca

Specifications

• Chipset: High-performance chipset
• Video Resolution: FHD 1080P and 2K QHD
• Certifications: CE and FCC
• Ports: Type-C, TF slot
• Features: Front and back lens, MIC, Indicator light, Screen

Product Usage Instructions

Power Button

Switch On/Off
Long press the Power button for 3 seconds to turn on/off the dashcam.

Turn off Screen
 Press the Power button to turn off the screen, and press again to turn it on.

Up Button

• Short press to switch video files in the playback interface.
• Short press to switch between front and rear lens preview.
• Short press to navigate system settings.
• Long press to toggle WIFI on/off.

Down Button

• Short press to switch video files in the playback interface.
• Short press to toggle video voice on/off in preview.

Menu Button

Open Menu: Short press to access the menu.

OK Button

Start/Stop Recording: Short press to start or stop recording.

Confirm Setting: In the system settings interface,  short press to confirm settings.

Mode Button

Take Photos
Short press to take photos.

Enter Playback
Long press to enter the playback interface.

SOS Button

Lock Video File: Short press to lock the current video file from loop recording deletion. Frequently Asked Questions (FAQ)

QHD CAR DASHCAM
This product adopts a high-performance chipset to provide high-definition video with seamless motion pictures. It has passed the strict certification of CE and FCC and supports FHD 1080P and 2K QHD video recording. Please read this manual carefully before use and keep it in a safe place, we hope this product can meet your needs and serve you for a long time!

Appearance and Button Description
(The following pictures are for reference only, please check the real product)

1. Reset
2. MIC
3. TF slot
4. Up
5. Menu
6. Down
7. Front lens
8. Type-C port
9. Back lens port
10. OK
11. Mode
12. SOS
13. Power button
14. Indicator light
15. Screen

Power button

1. Switch On/Off
   In the off state, long press [Power button] for 3 seconds to turn on the power of the dashcam, it will start recording video automatically.  In the power on state, long press [Power button] for 3 seconds to shut down, it will save the video file and settings automatically.

2.   Turn off
   the screenIn the power on state, press [Power button] to turn off the screen, press again to turn on the screen.

Up

1.  In the playback interface, short press to switch the video file
2. In the video preview, a short press to switch the front and rear lens interface
3.  In the system setting interface, short press to switch the setting
4.  Long press to turn on / off WIFI

Down

1. In the playback interface, short press to switch video file
2. In the video preview, a short press to turn on /off the video voice

Menu

1. Short press to open the menu

OK

1. Short press to start or stop recording
2.  In the system setting interface, short press to confirm the setting

Mode

1.  Short press to start taking photos
2.  Long press to enter the playback interface

SOS

1. Short press to lock the current video file, which will not be deleted by the loop recording function

Function interface

1. Recording video

System settings

• Loop Recording: Off, 1 Mins, 2 Mins, 3 Mins

•  Time-Lapse: Off, 1 Second, 2 Seconds, 3 Seconds

•  Time-Lapse time: Off, 12 Hours, 24 Hours, 48 Hours

•  Video voice: Off, On

•  G-sensor: Off, Low, Medium, High

•  Parking mode: Off, Low, Medium, High

•  Timestamp: Off, On

•  Mirroring of back lens: Off, Preview mirror, Video mirror, All mirror

•  Plate number: Off, On

•  Screen save: Off, 10 Seconds, 30 Seconds, 60 Seconds

•  Button sound: Off, On

•  Speaker volume: Off, Low, Medium, High

•  Switch on / off sound: On, Off

•  Language: Chinese Simplified, Chinese Traditional and others

•  Time setting: System time setting

•  Voice recognition: Off, On Voice recognition includes: Turn on screen, turn off screen, take picture, turn on voice, turn off voice, open the front lens, open the back lens, open all the lenses lock the video, turn on hotspot, turn off hotspot.

•  Mobile phone interconnection: Off, On

•  Format: Confirm, Cancel
  Note: Formatting will delete all the files (including locked files) in the memory card, after formatting , the files will not be recoverable, please copy important files before format.

•  Restore factory settings: Confirm, Cancel Selecting “Confirm” will restore the system defaults

• About: Version information

Playback

APP code

Please download the APP with your mobile phone for the first time to use the dashcam.

1.  Start the car to make the dashcam into a working state, in the mobile phone settings find the WIFI name “FHCam – ****”, and enter the password 12345678  to connect.
2.  After the connection is completed, enter the APP, the time of dashcam will besynchronised with the time of your mobile phone, and the video files and photoson the TF card will also be synchronised to the APP, you can playback and delete the files. Whether you need to format the TF card on the APP, you need to check if the files have been saved into the TF card.
3.  Be sure to format the TF card on the dashcam for the first time you use it, and format it once or twice a month regularly.
   Note: When formatting the TF card, please copy the important files to avoid losing
   files.

APP function introduction

1. APP interface

Setting interface

• Sound recording: On, Off
• Speaker Volume: Off, Low, Medium, High, Maximum
• Loop recording Duration: 1 mins, 2 mins, 3 mins
• Timestamp: On, Off (On video & Photo with time watermark; Off Video & Photo without watermark)
• Rear Mirror: On, Off
• Collision sensing: Off, Low, Medium, High
• Boot voice: On, Off
• Voice control: On, Off
• Parking monitor collision detection: Off, Low, Medium, High
• Time-Lapse video FPS: Off, 1 Second, 2 Seconds, 3 Seconds (the length of a video file is set to 1 minute, and the time-lapse recording frames are set to 1 second,   which is equivalent to recording a 1-minute video, and the actual recording time is 30 minutes)
• WIFI name: Wifi name can be modified (the dashcam will reset back to the default WIFI name after restoring the factory settings)
• WIFI password: Can manually set to WIFI password ( the dashcam will reset back to the default password 12345678 after restoring the factory settings)
• Firmware version: Dashcam software version
• Format: Format card ( recommended to format once or twice per month)
• Restore factory settings: Rest settings function

APP Playback interface

Installation guide

1. Stop the car engine

2. Insert the TF card into the card slot
   Note: Please use a high-speed TF card (Class 10 or above)

3. Install the dashcam on the front windshield
   Note: When wiring, you can lay the charging cable along the edge of the windshield of the car

4. Install the rear lens at the back of the vehicle, and pay attention to the direction when installing, the wiring can be laid along the roof of the vehicle.  After the installation is completed, connect the rear plug to the rear lens port of the dashcam.

5.  Adjust the position of the lens to ensure that the lens is level with the ground.

6.  Start the engine and check whether the dashcam has been turned on and installed correctly.
   Note: When the dashcam is installed correctly, the indicator light will turn on; the dashcam starts recording, and the indicator light will flash. Please check screen display is working, if it is an inverted image, please contact us in time.

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.  This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

FAQ’S

Q: How often should I format the TF card?
A: Format the TF card on the dashcam when using it for the first time, and regularly format it once or twice a month. Make sure to copy important files before formatting to avoid data loss.

Q: What type of TF card should I use?
A: Use a high-speed TF card with Class 10 or above for optimal performance with the dashcam.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>