CHESONA JP163T001 iPad Keyboard Case User Guide

USER GUIDE
iPad Keyboard Case

Note: Please read the manual carefully before using
JP163T-001

Technical Support

If you have any questions about your order, or any other matter, we would appreciate it if you could give us a chance to address your concern.

Keyboard Features

Function Key Description

= Home
= Search
= Pre Track
= Mute
= Lock Screen
= Brightness
= Virtual Keyboard
**** = Play/pause
= Volume –
= Brightness +
= Switch Language
= Next Track
= Volume +
:page up
: beginning of the line
: page down
: end of the line
: turn on the Bluetooth pairing mode
: Prs:s the bulbkrey wr:um onl, ‘urln off, and change backlit brightness levels.
:adjust 7 backlit’s color

1. The keyboard backlit will tur off automatically with inactivity ‘within 1 minute.
2.  The keyboard will go to sleep mode after 10 minutes inactivity.
3. The backlit function will automatically turn off when the battery is low.

How to get the keyboard sync with iPad

1. Slide the ON/OFF button to “On” to power on the keyboard.

2. Press “Fn” key and “C” key together to turn on the Bluetooth of the keyboard, the “PAIR” indicator will flash blue light slowly.

3.  Open the Bluetooth of the iPad and connect with “Bluetooth Keyboard”. If a problem persists, please try the following steps:

Troubleshooting:

1. Make sure your iPad and keyboard case are both charged.
2. Make sure the system is your iPad has updated to the latest version.
3. Delete/Forgive all the Bluetooth devices on your iPad.
4. Reboot both iPad and keyboard
5. Repeat the paring steps to reconnect the Bluetooth.

The keyboard will enter sleep mode if you don’t use it for longer than 10 minutes. You just need to press any of the keys on the keyboard to wake up the Bluetooth and the keyboard will get to work again. If the keyboard disconnects every time, please turn on the lock/unlock function of your iPad:iPad settings – display and brightness – lock/unlock function -turn it on.

Trackpad/ Indicator Overview

Turn on/off touchpad function Press “Fn” and “Command” together to turn on/off the touchpad function when you don’t need it.

Indicator Light

Caps Lock Indicator:
Press the Caps Lock key and the indicator will turn on.
Bluetooth Indicator:
Press “Fn” + “C” keys, the indicator will flash slowly and enter Bluetooth pairing mode. When the pairing is successful, the indicator will turn off automatically.
Charging/Power Indicator:
When the keyboard has a low battery, the indicator will flash red slowly.
When the keyboard is charging, the indicator will turn red.
When the battery is fully charged, the indicator will turn green.
When the keyboard turns on, it will enter the discovery mode and the indicator will be red for 3 seconds.

lOS: Trackpad Gestures

Note: Please upgrade iPad to the latest IOS system iOS 13.4.1 mouse function is enable: ”Setting” – “Accessibility” – ’Touch” – “Assistive Touch” – ””Open”

presses and the other finger
slides on the touchpad to drag it.
| Click and hold. Press and hold with one finger.| | Wake iPad. Click the trackpad. Or, if you’re using an external keyboard, press any key.
| Open the Dock. Use one finger to swipe the pointer past the bottom of the screen.| | Go Home. Use one finger to swipe the pointer past the bottom of the screen. After the Dock appears, swipe the pointer past the bottom of the screen again. Alternatively, click the bar a the bottom of the screen (on an iPad with Face ID).
| View Slide Over. Use one finger to swipe the pointer past the right edge of the screen. To hide Slide Over, swipe right again.| | Open Control Center. Use one finger to move the
pointer to select the status Icons at the top right, then click.
Or, select the status icons at the top right, then swipe up with one finger.
Trackpad Gestures| iOS System| Trackpad Gestures| iOS System
---|---|---|---
| Open Notification Center. Use one finger to move the pointer past the top of the screen near the middle. Or, select the status icons at the top left, then click.| | Scroll up or down. Swipe two fingers up or down.
| Scroll left or right. Swipe two fingers left or right.| | Zoom. Place two fingers near each other. Pinch open to zoom in, or pinch closed to zoom out.
| Go Home. Swipe up with three fingers.| | Switch between open apps. Swipe left or right with three
fingers.
| Open Today View.
When the Home screen or the Lock screen is visible, use two fingers to swipe right.| | Open search from the O Home screen.
Swipe down with two fingers.
| Secondary click. Click with two fingers to show the quick actions menu for items like icons on the Home screen, messages in a mailbox, and the Camera button
in Control Center. Or, if you’re using an external keyboard, you can press the Control key while you click the trackpad.|

Charging

1. Please charge the keyboard with your iPad’s charging cable.
2. Fully charge your keyboard until the “CHRG” indicator turns green.
   The keyboard charging port is TYPE C, and the input voltage cannot exceed DC- 5V, otherwise the keyboard will be damaged.

Installation and Removal

1. Remove the case: Hold both sides of the protective cover with your hands.
2.  Use your thumb to gently push out the back cover (as shown in the pictures) to peel the cover.
3. Separate the iPad from the protective case.
4. Take out the iPad upwards.

Note:
If the iPad and the protective cover are tightly attached, you can use a discarded bank card, insert it through the gap between the protective cover and the edge of the iPad, and then push the protective cover out.

Specifications

55 hours continuous using time when the backlit is off
5 hours continuous using time when the backlit is on

Do not unfold the case more than 180 degrees

Working Environment

1. Stay away from oil, chemical or other organic liquid articles. Note: liquid intake can lead to a short circuit.
2. Stay away from 2.4G frequency items such as microwave ovens, routers and so on. Note: it will interfere with Bluetooth.
3.  Prevent sunlight exposure and high temperature.

Pre-use Settings

1. Turn on the lock / unlock function
   After your iPad is connected the bluetooth with our keyboard , please go to iPad settings – display and brightness —- locking /unlocking function – turn it on.
   Remarks: If the locking / unlocking function is not turned on, you can’t wake up the bluetooth function nor wake up the iPad by pressing any key on the keyboard after the iPad is in a dormant state.
   

2. Turn off the mouse key function
   Go to iPad settings – Accessibility – Touch – Assistive touch – Mouse key = turn it off.
   Remarks: If the mouse key function is not turn off, it will cause the number key‘7. 8. 9’and letter key ‘U. 1. O. J. K. L. M’ can’t be entered.
   

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>