Taylor 3804-44 Digital Kitchen Scale User Manual
- June 14, 2024
- TAYLOR
Table of Contents
Taylor 3804-44 Digital Kitchen Scale
Digital Kitchen Scale
Thank you for purchasing a Taylor® Kitchen Scale. Your scale is an example of superior design and craftsmanship. Please read this instruction manual carefully before use. Keep these instructions handy for future reference.
©2019 Taylor Precision Products, a division of Lifetime Brands Inc. All rights reserved.
Made to our exact specifications in China.
One-Year Limited Warranty
Taylor® warrants this product to be free from defects in material or workmanship for one (1) year from the date of original purchase. It does not cover damages or wear resulting from accident, misuse, abuse, commercial use, or unauthorized adjustment and/or repair. If service is required, do not return to the retailer. Should this product require service (or replacement at our option), please pack the item carefully and return it prepaid, along with a store receipt showing the date of purchase and a note explaining the reason for return to:
TAYLOR Precision Products
- 2220 Entrada Del Sol, Suite A
- Las Cruces, New Mexico 88001 USA
- www.taylorusa.com
- Email: taylorusa@lifetimebrands.com
There are no expressed warranties except as listed above. This warranty gives you specific legal rights, and you may have other rights which vary from state to state.
Battery Installation
- This scale operates on 4 “AA” batteries (not included). Always replace all batteries at the same time; do not combine old and new batteries. Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni-mh, etc.) batteries. Do not dispose of batteries in a fire, as batteries may explode or leak. Remove the batteries if the scale will not be used for a long period of time.
- Open the battery compartment on the bottom of the scale by sliding the cover in the direction of the “open” arrow and remove the cover.
- Place the batteries into the battery compartment as indicated by the polarity symbols marked in the compartment.
- Slide the battery compartment cover back into place until it clicks shut.
- Replace the batteries if “LO” appears on the display, or the readings grow dim or irregular.
NOTE: Please recycle or dispose of batteries per local regulations. WARNING: Batteries may pose a choking hazard. As with all small items, do not let children handle batteries. If swallowed, seek medical attention immediately.
PRECAUTION: Do not dispose of batteries in a fire. Batteries may explode or leak. Remove the batteries if the scale will not be used for a long period of time.
General Weighing Operation
- Place the scale on a hard, level surface.
- Press the “ON/OFF” button to turn the scale on. The display first shows “8888”, then “0.0” when it is ready for use. If the display does not show “0.0”, press the “TARE” button to reset (tare) the scale to zero.
- Your scale is set at the factory to weigh in ounces. To switch to grams, move the switch on the bottom of the scale to “g”. The display will change to grams.
- Place the item to be weighed on the center of the platform. The weight will display. As you add weight, the weight displayed increases.
- The scale will turn off automatically after 1½ minutes of non-use. Press the “ON/OFF” button to turn the scale off manually.
Tare Operation
You may wish to weigh ingredients in the included bowl or other container. In this case, you will need to tare, or offset, the weight of the bowl so that only the weight of the ingredients is displayed.
- Choose a container that will safely balance on the platform without tipping or falling. Do not use a heavy container, as this might reduce the maximum capacity of the scale.
- While the scale is off, place the empty container on the scale platform. Turn the scale on. The display will show “8888” then “0.0”. The weight of the container has been zeroed out.
- Add the ingredients to be weighed. The weight of the ingredient alone will be displayed.
- The weight of additional ingredients may be torn out as well. For example, if a recipe calls for ½ lb rice and ½ lb beans, place the rice into the bowl. Once the correct amount of rice is weighed, press the “TARE” button until the display is reset to zero. Add the ½ lbs of beans. Both ingredients have been accurately weighed in the same bowl.
- When weights have been torn out, the display will show a negative number when the items are removed from the scale. To reset the scale back to zero for a new measurement, press the “TARE” button until the display resets to zero.
Precautions
- Clean exposed parts with a soft, slightly damp cloth. To remove stains, use a mild soap. Never use detergents, excess water, treated cloths, harsh cleaning agents, or sprays.
- Do not tamper with the scale’s internal components. Doing so will invalidate the warranty on this unit and may cause damage. The scale contains no user-serviceable parts
- Although your scale is designed to be maintenance-free, it contains sensitive electronic parts. Avoid rough treatment. Treat it with care to ensure the best performance.
- This scale is intended for home/consumer use only. It is not intended for commercial or medical use.
- This scale is designed to read weights up to 4.4 lbs/2 kgs. To prevent damage, do not place more than 4.4 lbs/2 kgs on it.
- Do not store scale where you store cleaning chemicals. The vapors from some household products may affect the electronic components of your scale. Do not store scale on its side.
- This scale is an extremely sensitive weighing device. In order to prevent rundown of the battery, do not store anything on the scale.
- Do not dispose of batteries in a fire. Batteries may explode or leak. Do not mix old and new batteries. Do not mix Alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni-mh, etc.) batteries. Remove the batteries if the scale will not be used for a long period of time.
- Overload Warning: Should “EE” appear on the display during a weighing, this indicates that the maximum weighing capacity of the scale has been exceeded. Remove the weight immediately; otherwise, permanent damage could occur.
FCC Notice
Party issuing Supplier’s Declaration of Conformity & Responsible party – U.S. Contact information:
Taylor Precision Products
2311 W. 22nd Street, Suite 200 Oak Brook, IL 60523
Equipment:
- Product Name: Kitchen Scale
- Model No.: 380444
- Trade Name: Taylor
We declare under our sole responsibility that the above-referenced product has been tested according to FCC requirements and this device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FREQUENTLY ASKED QUESTIONS
What is the warranty coverage for the Taylor 3804-44 Digital Kitchen Scale?
The Taylor 3804-44 Kitchen Scale comes with a One Year Limited Warranty. It covers defects in material or workmanship for one year from the date of the original purchase. This warranty does not cover damages resulting from misuse, abuse, commercial use, or unauthorized adjustment and repair. For service or replacement, follow the instructions provided in the warranty section of the manual.
How can I switch the unit of measurement between ounces and grams on the Taylor 3804-44 Kitchen Scale?
The scale is set to weigh in ounces by default. To switch to grams, move the switch on the bottom of the scale to the g position. The display will change to show measurements in grams.
Can I use the Taylor 3804-44 Kitchen Scale for weighing ingredients in a container or bowl?
Yes, you can use the tare function to weigh ingredients in a container or bowl accurately. Follow the provided instructions in the manual to tare the weight of the container, ensuring only the weight of the ingredients is displayed.
What is the maximum weight capacity of the Taylor 3804-44 Kitchen Scale?
The Taylor 3804-44 Kitchen Scale is designed to weigh items up to a maximum of 4.4 lbs (2 kgs). Avoid exceeding this weight limit to prevent damage to the scale.
How do I clean and maintain the Taylor 3804-44 Kitchen Scale?
Clean the exposed parts of the scale with a soft, slightly damp cloth using mild soap if necessary. Do not use detergents, excess water, abrasive cleaners, or sprays. Avoid tampering with the scale's internal components, and handle it with care to ensure optimal performance.
Is the Taylor 3804-44 Kitchen Scale suitable for commercial or medical use?
No, this scale is intended for home and consumer use only. It is not designed for commercial or medical applications.
What should I do if the scale displays EE during weighing?
If EE appears on the display during weighing, it indicates that the maximum capacity of the scale has been exceeded. Remove the weight immediately to avoid permanent damage to the scale.
Can I dispose of the batteries in the trash?
No, please dispose of batteries according to local regulations. Do not dispose of batteries in fire, as they may explode or leak. Follow the guidelines for proper battery disposal in your area.
How do I reset the scale to zero if I want to weigh another item without using the tare function?
To reset the scale to zero for a new measurement without using the tare function, simply press the TARE button until the display resets to zero. This allows you to start weighing a new item from scratch.
What should I do if the scale displays LO on the screen?
If the scale displays LO, it indicates that the batteries are low and need to be replaced. Please replace all four AA batteries with fresh ones to ensure proper scale operation.
Can I use rechargeable batteries with the Taylor 3804-44 Kitchen Scale?
Yes, you can use rechargeable AA batteries with the scale. However, ensure that the rechargeable batteries are fully charged before inserting them into the scale.
How long does the scale's auto-shutoff feature take to turn off the scale when not in use?
The scale is designed to automatically turn off after 1½ minutes of non-use to conserve battery power. If you wish to turn off the scale manually, press the ON/OFF button.
DOWNLOAD THE PDF LINK:Taylor 3804-44 Digital Kitchen Scale User Manual