CE LINK A4X-IPC-14NS Battery Camera User Guide
- June 14, 2024
- CE-LINK
Table of Contents
CE LINK A4X-IPC-14NS Battery Camera
Specifications
-
Active Pixels Clarity : 2.5K (2560*1440) Ultra HD
Resolution -
Resolution: 3.5mm@F2.0
-
FOV(D): 8m
-
Lens: IR LED
-
Storage: TF Card (Max 128G)
-
Wi- Fi: Only 2.4GHz Wi-Fi
-
Network Security : WPA-PSK / WPA2-PSK
-
Operating Temp : –
-
Battery Capacity : 5200mAh
-
Spotlights Audio PIR : 5m MIC/Speaker
-
Item Weight : 254g
-
Product Dimensions : 87(L)53(W)84(H) mm
-
Charging Power : DC5V-1A, Type-C
-
Water Proof : IP66
-
Mounting Type : Wall Mount
Product Usage Instructions
Set Up Your Camera
Step 1: Download
Download the Tuya Smart or Smart Life App from the Apple AppStore or Google
Play, or by scanning the provided QR code.
Step 2: Connect it to the APP
- Sign up for an App account and go to the app homepage.
- Tap “Add Device” and select the smart camera (Wi-Fi).
- Press and hold the power button on the camera for 3 seconds until the Status LED is Slow blinking Red or Heard Waiting to receive the wireless configuration.
If the SSID of your home Wi-Fi has been changed, you need to reconfigure the network. Please hold the reset button on the camera for 5-6 seconds until you hear “reset successfully,” then follow the prompts to add the device again.
Please follow the prompts of the App to allow relevant permissions; otherwise, it will affect the addition and use of the device.
Note: Please choose a 2.4GHz Wi-Fi network as the camera does not support 5GHz Wi-Fi.
- Click “Next” on the App, select a stable network, and enter the password.
- The camera on the device scans the QR code generated by the mobile phone, keeping a distance of 15 to 20cm and not moving until the sound of “Di” is heard.
- Follow the steps on the App to complete the addition.
When adding devices, please make sure the camera and mobile phone are connected to the same Wi-Fi router.
Mount Your Camera
Select a location where you want to mount the camera. It can be mounted on
a wall or ceiling. Choose a spot where you can get the desired view.
FAQ
- Q: What is the battery life of the camera?
- A: The battery camera can work for 3 months if it had been triggered 20 times per day after a full charging.
- Q: Can I use the camera without any cable for power or network connection?
- A: Yes, the camera is completely wireless and does not need any cable for line power or network.
- Q: Does the camera support color night vision?
- A: Yes, the camera has built-in IR LEDs and spotlights that allow you to capture a color image even at night.
- Q: What storage options are available for the camera?
- A: The camera supports both local storage and cloud storage.
In the Box
After opening the box, please check the following picture to see if the accessories are complete.
Introduction
-
Battery Powered and RTOS System
With a built-in PIR module and RTOS system the battery camera can work for 3 months if it had been triggered 20 times per day after a full charging. -
Completely Wireless
It doesn’t need any cable for line power or network. -
Excellent Clarity
2.5K(2560*1440) Ultra HD Resolution. -
Color Night Vision
The hardware has the built-in IR LEDs and spotlights that allow you to capture a color image even at night. -
Storage
Support local storage and cloud storage.
Product Overview
Appearance
- Status LED
- Photosensitive Sensors
- Spotlights
- PIR
- Lens
- Microphone
- Micro SD Card 7 Slot
- Speaker
- Power Button
- Power Input
- Reset Button
Status LED
LED Status | Description |
---|---|
**** Slow blinking Red | **** Ready to connect |
**** Fast blinking Red | **** Disconnected from the internet |
**** Slow blinking Blue | **** Connected to the router successfully |
**** Solid Blue | The camera has been added successfully and working normally |
Flashing blue and red alternately | **** A firmware update is in progress |
Basic Parameters
Active Pixels | 2560*1440 | Storage | TF Card (Max 128G) |
---|---|---|---|
Clarity Resolution | 4MP | Wi- Fi | Only 2.4GHz Wi-Fi |
FOV(D) | 120° | Network Security | WPA-PSK |
/WPA2-PSK
Lens| 3.5mm@F2.0| Operating Temp|
-20~+50°C
IR LED| 8m| Battery Capacity| 5200mAh
Spotlights| 5m| Item Weight| 254g
Audio| MIC/Spearker| Product Dimensions|
- 87(L)53(W)
- 84(H) mm
PIR| 8m(100°)| Charging Power| DC5V-1A,
Type-C
Water Proof| IP66| Mounting Type| Wall Mount
Set Up Your Camera
Step 1 Download
Download the Tuya Smart or Smart Life App from the Apple AppStore or Google
Play, or by scanning the QR code below.
Step 2 Connect it to the APP
-
Sign up an App account, go to the app homepage, tap Add Device, and select the smart camera(Wi-Fi).
- Please follow the prompts of the App to allow relevant permissions, otherwise it will affect the addition and use of the device.
-
Press and hold the power button for 3s until the Status LED is Slow blinking Red or Heard “Waiting to receive the wireless configuration”
-
Reset the device
If the SSID of your home Wifi have been changed, you need to reconfigure the network. Please hold the reset button for 5-6 seconds until you heard “reset successfully”, then take the prompts to add the device again -
Please choose a 2.4GHz Wi-Fi, the camera does not support the 5GHz Wi-Fi.
-
-
Please click Next, select a stable network and enter a password. The camera of the device scans the QR code generated by the mobile phone, keeps a distance of 15 to 20cm and does not move until the sound of “ Di ” is heard, and finally follows the steps on the App to complete the addition.
- When adding devices, please make the camera and mobile phone connect to a same Wi-Fi router.
Mount Your Camera
Select a location
- The camera can be mounted on a wall or ceiling. Choose a spot where you can get the desired view.
- Make sure to pick a place within range of your home network. Please try streaming video before you mount your camera.
- We recommend hanging it 2.5m (8.2 ft) above the ground and maintaining an angle of about 25 degrees from the horizontal ground.
To mount the Camera on the wall
- Step 1 Turn the knob of the mounting bracket counterclockwise to loosen and disassemble it.
- Step 2 Align the mounting plate and mark the three circles where the holes need to be drilled.
- Step 3 Drill three holes above the three marked circles.
- Step 4 Insert three anchors into the holes and use the screws to affix the bracket over the anchors.
- Step 5 Rotate the knob of the mounting bracket clockwise to secure it to the base of the mounting bracket.
- Step 6 Align the hole at the bottom of the camera with the mounting bracket, and turn the camera clockwise to fix the camera to the mounting bracket. Rotate the camera to adjust the view and check it using the live stream which you can access in the app.
To mount the Camera on the ceiling
Please follow the steps 1-6 to secure the camera onto the ceiling.
How to remove Your Camera
Hold the main body of the camera, then rotate anticlockwise to remove the
camera from the mounting bracket.
Notice
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2 : Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
CAUTION
- Risk of fire or explosion if the battery is replaced by an incorrect type.
- Avoid replacement of a battery with an incorrect type that can defeat a safeguard. Avoid disposal of a battery into fire or a hot oven, or mechanically crushing or cutting off a battery, that can result in an explosion.
- Do not leave a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; Do not leave a battery subjected to the extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
Customer Service
Warranty
12-month Limited Warranty
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>