RainPoint ITV517P-100-120mm Water Timer Instructions

Instructions

PRODUCT SETTINGS

STEP 1: SET CLOCK

1. Turn the dial to SET CLOCK.
2. Press the “+” and “-” buttons to set the weekday, hour, and minute; press the “OK” button to save after each setting.
3. Press and hold “+” or “-” for more than 3 seconds to adjust them quickly.
4. Default 24-hour system, press and hold the “OK” button for more than 3 seconds to switch between the 12-hour system and the 24-hour system.
5. Turn the dial to save changes.

STEP 2: PLAN 1/2/3 PROGRAMMING

1. Turn the dial to “Plan 1/2/3” to set the schedule for each of them.
2. Below steps 3~5 show how to set the start time, watering duration, and watering frequency for Plan 1.
3. After setting up Plan 1, turn the dial to Plan 2 and Plan 3. Repeat steps 3~5 to set Start Time, How Long, and How Often for Plan 2 and Plan 3.
4. Turn the dial to “ON” to save changes after finishing all settings, and start the watering plan.

TIPS：
Three different and independent schedules can be created for the water timer. The start time, duration, and frequency of the irrigation can be adjusted. You can set a highly flexible plan according to your personal preferences.
For example, in hot and dry climates where the soil loses moisture quickly, running three schedules on the timer can achieve watering three times a day to help plants replenish water and promote healthy growth.
STEP 3: START TIME

1. Turn the dial to Plan 1 and start setting from Start Time.
2. Press the “+” and “-” buttons to set the hour and minute, and press the “OK” button to save after each setting.
3. When both the hour and minute parts stop blinking, the start time for Plan 1 has been finished. At this time, pressing the “+” or “-” button can set the start time again.

STEP 4: HOW LONG

1. After “Start Time” setting, press the “MENU” button to switch to setting “How Long”.

2. Press the “+” and “一” buttons to set the watering hours and minutes, and press the “OK” button to save after each setting.(Watering duration can be set from 0~3 hrs 59 mins.)
   Note: If set “How Long” to 0 Hour and 0 Minute, Plan 1 won’t run.

3. When both the hour and minute parts stop blinking, the “HOW LONG” for Plan 1 has been finished. At this time, pressing the “+” or “一” button can set the watering hour and minute again.

STEP 5: HOW OFTEN

1. After “How Long” setting, press the “MENU” button to switch to setting “How Often”.
2. Weekday Mode and Every Mode to choose from. Press the “+” or “-” buttons to switch between 2 modes.

Note:
Every Mode: The water timer will automatically water your garden every few hours or a few days.
Weekday Mode: The water timer will water your garden on the specific weekday you set, such as Monday, Wednesday, and Friday.

Choosing “Every” Mode:

1. When “Every” is blinking, press the “OK” button to select it.
   Then press the “+” or “-” buttons to choose the watering frequency from every 6H, 8H, 12H, or 1~7 days, and press the “OK” button to confirm.

2. When the number stops blinking, the “Every” mode for Plan 1 has been finished. At this time, pressing the “+” or “-” button can set the watering intervals again.

3. After Plan 1’s “How Often” setting, turn the dial to Plan 2, and the settings for Plan 1 will save automatically.

Note:
To switch between Every and Weekday modes, please press the “MENU” button three times to re-enter the How Often setting. More examples please turn to page 14

Choosing “Weekday” Mode:

1. When “Weekday” is blinking, press the “OK” button to select it.
   Then press the “+” or “-” buttons to choose from Monday to Sunday, and press the “OK” button to confirm the weekday you want to water.

2. When the week stops blinking, the “Weekday” mode for Plan 1 has been finished. At this time, pressing the “+” or “-” button can set the watering weekday again.

3. After Plan 1’s “How Often” setting, turn the dial to Plan 2, and the settings for Plan 1 will save automatically.

Note:
To switch between Every and Weekday modes, please press the “MENU” button three times to re-enter the How Often setting. More examples please turn to page 15

Setting Examples:

1. Watering needs: Only run Plan 1, water every 6 hours, 20 minutes each time.
   Programming:Watering Schedule: Every 6 Hours

2. Watering needs: Only run Plan 1, water every 1 day or 2 days, 20 minutes each time.
   Programming:

Watering Schedule: Every 1 Day Watering Schedule: Every 2 Day Note:
If you only want to run Plan 1, you can set the “How Long” of Plan 2 and 3 to 0 Hour and 0 Minute, then Plan 2 and 3 won’t run.
Setting Examples:

1. Watering needs: Only run Plan 1, watering on Monday, Wednesday, Friday, 20 minutes each time.Watering Schedule:
2. Watering needs: Water on Monday, Wednesday and Friday, 3 times a day, 20 minutes each time.
   Programming:Watering Schedule: Note:
   If you only want to run Plan 1, you can set the “How Long” of Plan 2 and 3 to 0 Hour and 0 Minute, then Plan 2 and 3 won’t run.

https://www.rainpointonline.com/pages/support
Scan the QR code to
get fast support
Need Help?
Please contact us
US Free Hotline: +1 833-381-5659
(MON-FRI: 09:30 AM-5:30 PM PST)
EU Free Hotline: +44 800-808-5337 (EN,DE)
(MON-FRI 9:00 AM-5:00 PM CET)
Email: [email protected]
Website: www.rainpointonline.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>