ErGear 63 Height-Adjustable Electric Standing Desk Instruction Manual

ErGear 63 Height-Adjustable Electric Standing Desk

Technical Support

(us/CA) l-800-651-9525 Mon-Fri, 8 am-8 pm (CST) (UK) 44-808-196-3875 Mon-Fri, 2 pm-l0pm (UTC)

• Other Info: support@ergear.com
• Website: https://ergear.com

Specifications

Height Adjustment Range 28.3″-46.5″ (72-118cm)

Supplied Parts and Hardware

Assembling and Connecting the Desk Legs

Attaching the Side Plates and the Transmission Rod

Before attaching the transmission rod, measure the heights of the two desk legs to see if they are set at the same level. If not, insert the transmission rod into the hole in the left leg. Turn the rod to adjust the left leg so it’s level with the right leg. Turn the rod clockwise to lower the left leg or anti-clockwise to raise it.

Ensure the transmission rod is properly inserted into the hole in the left leg. Smoothly connect the other end of the rod to the end of the motor drive shaft on the right leg.

Secure the transmission rod to the motor drive shaft by turning the set screw clockwise .

Assembling and Attaching the Desktop

Assemble the desktop.

Attach the desktop to the frame.

Attach the controller and hooks to the desktop.

Connecting the Cables

Installing the Cable Hole Covers

Using the Controller

Save Current Height Setting
Short-press the S button, and the display will flash. Press the 1, 2 ,3 or [ID button to save the current height setting to that button.

Select Height Setting 1
Press the 1 button, and the desk will move to the height that was previously set for that button.

Select Height Setting 2
Press the 2 button, and the desk will move to the height that was previously set for that button.

Select Height Setting 3
Press the 3 button, and the desk will move to the height that was previously set for that button.

Raise the Desk
Press the ∧ button to raise the desk continuously until it reaches the highest position of 46.5″ (118cm) or the button is released.

Lower the Desk
Press the ∨ button to lower the desk continuously until it reaches the lowest position of 28.3″ (72cm) or the button is released.

E32

|

Overvoltage Protection: Input voltage too high. If the correct AC adapter is being used, power off the desk, check the connection between power and the controller, and power on again.

---|---

E31

| Undervoltage Protection: Input voltage is too low. If the correct AC adapter is being used, power off the desk, check the connection between power and the controller, and power on again.

E60

| Unequal Leg Height Warning: Power off the desk and check whether the left and right legs are at the same height. Adjust if necessary by following the instructions. Power on again.
| Cable Disconnection Warning: Check motor and controller cable connections. Normal operation should return once all connectors are properly connected.

Thank you for choosing this product. We strive to provide you with the best quality products and services in the industry. Should you have any issues, please don’t hesitate to contact us.

Technical Support

• ( US/CA) 1-800-651-9525
• Mon-Fri, 8am-8pm (CST)
• (UK) 44-808-196-3875 Mon-Fri, 2 pm-10 pm (UTC)

Other Info:support@ergear.com
Website:https://ergear.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>