ToSee CR123A Secure WiFi PIR Motion Sensor Instructions
- June 6, 2024
- ToSee
Table of Contents
INSTRUCTION
MOTION SENSOR
With temperature and humidity sensor
Thanks for Choosing our WiFi Smart Home Sensors
Product Configuration
Specifications
Battery: CR123A 3V*2
USB power: 5V/1A
Standby current: 60uA
Detect range: 10M
Detect angle: 120°
Detect temperature: -10℃~ 0℃
Detect humidity: 0%~ 100%
Wireless type: 2.4GHz
Wireless standard: IEEE 802.11b/g/n
Wireless range: 45M
Operating temperature: 0℃~ 40℃
Operating humidity: 20% ~ 85%
Size: 68mm x 56mm x 56mm
LED State
Device Status | LED State |
---|---|
Smart Wi-Fi | The indicator flashes 2times/second |
AP mode | The indicator flashes 1time /2 seconds |
Reset | Pressing button for 5-7s |
Pairing mode | Indicator light continues to flash |
NOTE:
- Powered by USB, the PIR sensor won’t be in sleep mode
- The device detects every 1 min, will alarm continuously when movement is detected Support 2.4GHz Wi-Fi only ;
- When the power supply is switched, there will be a delay in the APP display
- Default temperature alarm range: 64℉ – 122℉;Default humidity alarm range: 40% – 80% RH
How to reset?
- Press the reset button for 6 seconds till the indicator flash rapidly. Then device turns to smart will mode.
- Press the reset button again for 6 seconds till the indicator flash slowly. The device turns to AP mode.
Get Started with Tuya Smart App
1. Download APP
- Download the “Smart Life” app from APP Store or Google Play to your mobile.
http://smartapp.tuya.com/smartlife
2. Register and log in
- Launch the “Smart life” app.
- To register, enter your mobile phone number or email address, create a password, then login to the app.
- Log in if you have an account already.
3. Add Device
- Power on the smart sensor which default mode is Smart WiFi mode.
- Select the “+” symbol on the top right-hand corner.
- Select your product type and follow the instructions of the app.
- If the connecting fails, try using AP Mode
- On the “Add device” page select “AP Mode” on the top right-hand corner and follow the instructions of the app.
- Finally, have fun!
What’s the App User Interface Like?
Experience Advanced Features
You can experience the various advanced features of the product with the app,
just try and do it yourself.
Main function
1. Tamper-proof
- When PIR housing is taken, the app will push notification.
2. Temperature and humidity detection
- Powered by battery, short press button for 2 times. the indicator will be flashing .PIR is in pairing mode, users can edit the alarming scale of temperature and humidity and temperature’s remark.
3. Alarm record
- Device record
- APP recording: Check all the added devices alarm messages in history.
Other function
Linkage alarm setting
- To connect two Sensors via scene-setting.
Device sharing
- Allow others to control the device
Push notification
- Open/close push notification
Remove device
- Restore default settings; Delete and add the device again to clear the record by APP.
Make Your Home Smarter