MOUNTUP MU0005 Dual Monitor Stand for Desk User Manual
- June 14, 2024
- MOUNTUP
Table of Contents
MOUNTUP MU0005 Dual Monitor Stand for Desk
Product Information
Specifications
- Product Dimensions: 160mm x 200mm-280mm x 50mm
- Load Capacity: Each Monitor 2~8 kg (4.4~17.6 lbs)
Product Usage Instructions
-
Installation
Before assembly, please check and make sure all necessary accessories are included and undamaged. Read and understand the manual carefully before installation. -
Safety Caution
Keep away from children under 3 years old as the product contains small items that could be a choking hazard if swallowed. Adult supervision is required. Improper installation, such as using the product for monitors over its load capacity or for any purpose not explicitly specified, may cause damage or serious injury. -
Caution and Maintenance
Never allow children to climb, stand, hang, or play on any part of the monitor or stand. This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury. Check that the bracket is secure and safe to use at regular intervals (at least every three months).
Installation Instructions
-
Step 1: Apply Pads to the Base Bottom
Apply pads (E1&E2) to the base bottom to avoid desk scratches. -
Step 2: Mount Clamp to the Base
Remove the plastic cover from the base (C). Mount clamp (D) to the bottom of the base (C) by tightening bolts (K) with a 5mm Allen Key (I). -
Step 3: Secure Stand to the Desktop
Tighten clamp (D) to secure the stand to the desktop. Fix the plastic cover to the base (C).
FAQs
Q: What is the load capacity of each monitor?
A: The load capacity of each monitor is 2~8 kg (4.4~17.6 lbs).
Q:Can this product be used outdoors?
A: No, this product is intended for indoor use only. Using it outdoors
could lead to product failure and personal injury.
If you have any questions, please feel free to contact Customer Service via Amazon before returning.
Safety Caution
BEFORE ASSEMBLY
- Please check and make sure all necessary accessories are included and undamaged.
- Please read and understand this manual carefully before installation.
WARNING
- This product contains small items that could be a choking hazard if swallowed. KEEP AWAY FROM CHILDREN UNDER 3 YEARS OLD. ADULT SUPERVISION IS REQUIRED.
- Improper installation, such as using the product for monitors over its load capacity or for any purpose not explicitly specified, may cause damage or serious injury. We would not be liable for any damage or injury mounting or caused by improper inappropriate use.
CAUTION AND MAINTENANCE
- Never allow children to climb, stand, hang, or play on any part of monitor or stand.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
- Check that the bracket is secure and safe to use at regular intervals (at least every three months).
Product Dimensions
Parts and Hardware
NOTE: Not all parts and hardware included will be used.
Base Installation
Clamp Installation
OPTION A: Clamp Installation
A-1
Apply pads (E1&E2) to the base bottom to avoid desk scratches.
A-2
Remove the plastic cover from Base (C). Mount Clamp (D) to the bottom of Base
(C) by tightening bolts (K) with 5mm Allen Key (I).
A-3
Secure stand to the desktop by tightening clamp (D). Fix the plastic cover to
Base (C).
Grommet Base Installation
OPTION B: Grommet Base Installation
B-1
Apply pads (E1&E2) to the base bottom to avoid desk scratches.
B-2
- If existing grommet hole comes with a plastic protector, remove it to ensure a flat surface before installing the desk mount.
- Detach Bracket (D1) from Clamp (D).
B-3
Secure base to the desktop by using Bracket (D1) and Wingnut (F). Install the
plastic cover to Base (C) finally.
Arm Installation
Install the lower arm (B) and the upper arm (A) to the base (C). Secure the arm by tightening the inside screw using 3mm Allen key (H).
M-D
If the inside screws are missing, you can use spare screws.
DO NOT tighten the screw excessively or it might be stripped.
Please do not move stand outside desk for safety!
Monitor Installation
Do not tighten the screws excessively or your monitor might be damaged.
- Install the top two screws first with 3-5mm space left..
- And then you attach the monitor to the arm.
- Finally install the next two screws and tighten all four screws.
Adjustments
Adjustments (If necessary)
Tilt Adjustment
- Loosen the tilting bolt.
- Adjust monitor to your desired tilt angle.
- Retighten the tilting bolt to fix the intended angle.
Tension Adjustament
The gas spring is pre-set for a load-bearing range of 4-6KG. Depending on
the weight of your actual monitor, you may need to adjust the tension of Arm
(A) inaccordance with your monitor weight by 6mm Allen Key (J).
Note: Be sure to keep the arm in a horizontal position during adjustment.
Situation 1: If arm falls down
Solution:
Turn the inside screw counterclockwise to increase tension.
Situation 2: If arm rises up
Solution:
Turn the inside screw clockwise to decrease tension.
Cable Management
Remove the cable cover, run cables through bottom of the arm, then install the cable cover again.
Adjust monitor position and rotation.
Rotate Vigorously
Note:
To ensure stability, the tightness of the rotating axis has been preset, so it
would be kind of difficult to rotate the VESA plate.
Suggestion:
Please attach the monitor first, then hold the sides of it with both hands,
and rotate vigorously. If that doesn’t work out, please do not hesitate to ask
for our help.