NEEWER 10088612 Ring Light Kit with Light Stand Instruction Manual

: June 14, 2024
: NEEWER

Table of Contents

NEEWER 10088612 Ring Light Kit with Light Stand
DECLARATION OF CONFORMITY
Accessories Included
Safety Notes
Installation Guide
- Applications
Read User Manual Online (PDF format)
Download This Manual (PDF format)

NEEWER 10088612 Ring Light Kit with Light Stand

NEEWER-10088612-Ring-Light-Kit-with-Light-Stand-
product

Document Information
2022 Shenzhen Neewer Technology Co., Ltd. All Rights Reserved.

This document is the sole property of Shenzhen Neewer Technology Co., Ltd and shall not be, reproduced, transmitted, transcribed, stored in a retrieval system or translated in any form, by any means, without prior written permission from Shenzhen Neewer Technology Co., Ltd. Shenzhen Neewer Technology Co., Ltd reserves the right to change content in this instruction manual at any time and without prior notice.

Version Control

Date	Version number	Description	Issued by
02/08/2022	1.0	Ring Light Instruction Manual	Neewer®

DECLARATION OF CONFORMITY

EU DECLARATION OF CONFORMITY

Manufacturer:	Shenzhen Neewer Technology Co.,Ltd
Address:	Room 1901-1903, Block A LU SHAN BUILDING NO 3023

We herewith declare that the above-mentioned products comply with the relevant harmonization regulations of the EC Council. The following harmonized standards and technical specifications have been applied:

R20a1d4io/5E3q/EuUipment Directive (RED)| ETSI EN 300 328 V2.2.2
ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17V3.2.4
EN55032:2015/A1:2020
EN55035:2017/A11:2020
EN 50663:2017
EN 62368-12014/A11:2017
---|---
The LVD Directive 2014/35/EU| EN 60598-2-4:2018
EN 60598-1:2015+A1:2018
EN 62471:2008
EN 62493:2015
EN 62031:2008+A1:2013+A2:2015
The EMC Directive 2014/30/EU| EN IEC 55015:2019+A11:2020
EN IEC 61000-3-2:2019+A1:2021
EN 61000-3-3:2013+A1:2019+A2:2021
EN 61547: 2009
---|---
ROHS Directive 2011/65/EU and its amendment directives (EU) 2015/863| IEC 62321-3-1:2013
IEC 62321-5:2013
IEC 62321-4:2013+AMD1:2017
CSV IEC 62321-6:2015
IEC 62321-7-1:2015
IEC 62321-7-2:2017
IEC 62321-8:2017
IEC 62321-87:-20:210717
ERP| COMMISSION REGULATION (EU) 2019/2020
COMMISSION DELEGATED REGULATION (EU) 2019/2015
COMMISSION DELEGATED REGULATION (EU) 2021/340
COMMISSION DELEGATED REGULATION (EU) 2021/341
---|---
REACH| Regulation (EC) No 1907/2006 of REACH
EU PLUG| DIN VDE 0620 Teil 101:1992-05; EN 50075: 1990
UK PLUG| BS1363-1: 2016+A1: 2018

Signed and on behalf of Shenzhen Neewer Technology Co., Ltd
Name: Caiying Liu
Position: Managing Director
Signature:

Date of Sign: 2023-10-23

The “CE” mark indicates that this product complies with European regulations for product safety, health requirements, and environmental protection.

This symbol indicates the separate collection of electrical and electronic devices that become industrial waste in EU countries. Please do not dispose of such devices in household waste. Please use the return and collection systems in your country for the disposal of these products.

Accessories Included

Please note:
Some items included in this manual are for illustration purposes only and may be available to purchase separately. This ring light set includes only the following: (1) Tripod stand, (1) Orange filter set, (1) White filter set, (1) Ring light head, (1) Remote control, (1) Flexible gooseneck, (1) Ball head adapter, (1) Smartphone Holder, (1) Carrying Bag. Maximum radio-frequency power: 1.03d Bm.

NEEWER-10088612-Ring-Light-Kit-with-Light-Stand-fig-3

Safety Notes

Please do not use the light in the rain or in a humid environment.

Please do not use the light in a flammable or explosive environment in case of safety hazards.

Please put the cables away in case of a tripping hazard.

Please do not use chemicals or liquids to clean the LED light.

Installation Guide

Installation of Light Stand

Folded Light stand.
Loosen the fixing screw knob.
Fully stretch out the stand legs until the bottom cross rods are level with the ground.
Lock the rotational knob at the base of the middle pole to fix it in position.
Loosen the adjuster on the second section, extend it to the desired height, and tighten it.
Loosen the adjuster on the third section, extend it to the desired height, and tighten it.

Installation of Color Filter

Firstly, attach the color filter at the bottom of the ring light (unique filter).
Then, attach the other three color filters in order.
Mount ring light head on the tripod.
Set-up complete.

Installation of Smartphone

Slide the ball head into the ring light cold shoe and screw tightly.
Put the smart phone in place.
Align the 1/4″ thread hole at the bottom of the phone holder with the 1/4″ screw on the ball head and screw them tightly.
Turn on the remote control and search for “Neewer-Shutter” in your phone’s settings.

Applications

Perfect selfie lighting Stable Light and hands-free operation.
Ideal companion for photographers
Create stellar, fashion-infused images with even soft lighting effects.

If you have any questions about a product, we are glad to help.