EKSA H1 Noise Cancelling Trucker Bluetooth Headset User Manual

June 14, 2024
EKSA

EKSA H1 Noise Cancelling Trucker Bluetooth Headset

IMPORTANT SAFETY INSTRUCTIONS

Please read and keep all safety and use instructions.

WARNINGS/CAUTIONS

  • Do NOT use the headphones at a high volume for any extended period.
    • To avoid hearing damage, use your head.
    • phones at a comfortable, moderate volume level.
    • Turn the volume down on your device before placing the headphones in/on your ears, then turn the volume up gradually until you reach a comfortable listening level.
  • Do NOT use your headphones while driving for phone calls or any other purpose.
  • Do NOT use the headphones at any time the inability to hear surrounding sounds may present a danger to yourself or others, e.g., while riding a bicycle or walking in or near traffic, a construction site or railroad, etc.
    • Remove the headphones, to ensure you can hear surrounding sounds, including alarms and warning signals.
    • Be aware of how sounds that you rely on as reminders or warnings may vary in character when using the headphones.
  • Do NOT use the headphones if they emit any loud unusual noise. If this happens, turn the headphones off and contact EKSAtelecomcustomer service.
  • Remove headphones immediately if you experience a warming sensation or loss of audio.
  • Do NOT use mobile phone adapters to connect headphones to aeroplane seat jacks, as this could result in injury or property damage due to overheating.
  • Do NOT use the headphones as aviation communication headsets except in case of emergency.
    • No incoming audio will be heard with a discharged or improperly installed battery. This could result in the potential of missed communications while piloting an aircraft.
    • Extremely loud ambient noise levels common to many propeller-driven aircraft may impair your ability to receive incoming audio communications, particularly during takeoff and climb out.
    • The headphones are not engineered for noise conditions, altitude, temperature or other environmental conditions common in non-commercial aircraft, resulting in possible interference to critical communications.

Contains small parts which may be a choking hazard. Not suitable for children under age 3. This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device.

  • To reduce the risk of fire or electrical shock, do NOT expose this product to rain, liquids or moisture.
  • Do NOT make unauthorized alterations to this product.
  • Use this product only with an agency-approved power supply that meets local regulatory requirements (e.g., UL, CSA, VDE, CCC).
  • Do not expose products containing batteries to excessive heat (e.g. from storage in direct sunlight, fire or the like).

REGULATORY INFORMATION

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by YI ZHAO (SHENZHEN) CO., LIMITED could void the user’s authority to operate this equipment.

This device complies with part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with FCC and Industry Canada radiation exposure limits set forth for the general population. It must not be co-located or operating in conjunction with any other antenna or transmitter. Meets IMDA Requirements.

CAN ICES-3 (B)/NMB-3(B)

Management Regulation for Low-power Radio-frequency Devices

Article XII
According to “Management Regulation for Low-power Radio-frequency Devices” without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristics as well as performance to approved low-power radio-frequency devices.

Article XIV
The low-power radio-frequency devices shall not influence aircraft security and interfere with legal communications; If found, the user shall cease operating immediately until no interference is achieved. The said legal communications means radio communications operated in compliance with the Telecommunications Act. The low-power radio-frequency devices must be susceptible with interference from legal communications or ISM radio wave- radiated devices. DON’T attempt to remove the rechargeable lithium-ion battery from this product. Contact your local EKSAtelecom retailer or other qualified professional for removal.

(Exclares that enis product is in comp hereby with the essential requirements and other relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements. The complete declaration of conformity can be found at: www.eksatelecom.com

For Europe: Frequency band of operation 2402 – 2480

Bluetooth: Maximum transmit power less than 20dBm EIRP.

  • Please dispose of used batteries properly, following local regulations. Do not incinerate.

REGULATORY INFORMATION

This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling help protect natural resources, human health and the environment. For more information on the disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.

Removal of the rechargeable lithium-ion battery in this product should be conducted only by a qualified professional. Please contact your local EKSAtelecom retailer or see https://www.eksatelecom.com for further information.EKSA-H1-Noise-Cancelling-Trucker-Bluetooth-Headset-
FIG-1

Charging temperature range: 0° C – 45° C
Discharging temperature range: -20° C – 60° C

EC REP

C&E Connection E-Commerce (DE) GmbH Add.: Zum Linnegraben 20, 65933, Frankfurt am Main, Germany

  • Tel.: +4906927246648
  • Email: info@ce-connection.de

UK REP
APEX CE SPECIALISTS LIMITED Add.: 89 Princess Street, Manchester, M1 4HT, UK

  • Tel.: +441616371080
  • Email: info@apex-ce.com
  • Manufacturer: YI ZHAO (SHENZHEN) CO., LIMITED Add.: 6th Floor, T3 Creative Building, Shenzhen Colorful Huiwei Cultural and Creative Expo City, No.5010 Baoan Avenue, Caowei Community, Hangcheng Street, Baoan District, Shenzhen City, Guangdong Province, China.
  • Manufacturer’s Name: YI ZHAO (SHENZHEN) CO., LIMITED
  • Sample Description: Office Headset
  • Trade Mark: EKSAtelecom
  • Model number: H1

This product is a portable device. To comply with RF exposure requirements, a minimum separation distance of 0mm must be maintained between the user’s body and the device, including the antenna. Third-party belt clips, holsters, and similar accessories used by this device should not contain any metallic components. Accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or approved antenna. This device complies with the essential requirements and other relevant provisions of the UK Radio Equipment Regulations (SI 2017/1206); UK Electrical Equipment (Safety) Regulations (SI 2016/1101); and UK Electromagnetic Compatibility Regulations (SI 2016/1091). All essential radio test suites have been carried out.

UK Declaration of Conformity
Hereby, YI ZHAO (SHENZHEN) CO., LIMITED declares that the product type H1 complies with the following Directives: Radio Equipment Regulations 2017, Electrical Equipment (Safety) Regulations 2016 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the UK Declaration of conformity is available at the following internet address: www.eksatelecom.com

RF specification

EKSA-H1-Noise-Cancelling-Trucker-Bluetooth-Headset-
FIG-2

FCC  STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals