Breathings BULO Portable Breath Analysis Device Instruction Manual

Breathings BULO Portable Breath Analysis Device

Safety Precautions

Storage

1. Avoid direct sunlight or areas close to heating devices. Do not store or use near flammable spray or other flammable objects.
   There is a danger of an explosion or fire.

2. Do not place heavy objects on top of the product.
   There is a danger of an explosion or fire.

3. When charging the product, please avoid plugging it into an outlet that already has multiple electronics plugged in.
   There is a danger of an explosion or fire.

4. When charging the product, install the product in an area where the plug can be operated easily.
   There is a danger of an explosion or fire.

5. For optimum performance, avoid storage in areas with radiation.

6. After each use, place the product in the enclosed pouch and store away from direct sunlight.
   Foreign substances can cause malfunctions.

Use

1. Except for the mouthpiece, keep the product away from any contact with liquids.
   This is to avoid the possibility of fires or electric shocks.

2. In case of smoke or strange smells, stop use of the product immediately. Quickly turn off the power and after separating from the charging cable, call the service center.
   This is to avoid the possibility of fires or electric shocks.

3. Separate product from charging cable when there is lightning and thunder.
   This is to avoid causing a fire.

4. Do not use it shortly after ingesting food or drink.
   May affect sensor performance.

5. Do not attempt to dismantle, repair or reconstruct the product.
   Fires, electric shock or injuries can be caused by malfunctions.

6. Do not heat, bend, twist, inscribe on or damage the charging cable in any way.
   This is to avoid the possibility of fires or electric shocks caused by a damaged cable.

7. Handle and hold the charging cable only with dry hands.
   This is to avoid the possibility of electric shocks.

8. The charging cable must be removed from the product after charging.
   This is due to the possibility of fires or electric shocks.

9. Contact the service center when you have any complications or inquiries about the product.
   Customers will not receive any compensation if they attempted to disassemble or repair the product at their own discretion.

10. Only use the product in accordance with health maintenance.
    If the product is used for any purpose besides health maintenance, the company is not responsible for any damage, compensation or legal issues that may occur.

Introduction to BULO

Product Contents

List of Parts

1. LED Signal Light
2. Button
3. Removable Handle
4. USB Charging Port

Details on the LED Signal Light

C c o h m a r p g l i e n t g e| Green
S B e l u a e r t c o h o i n t h g **d f o e r vic e| Flickering Blue
B c o l u n e n t e o c o t t e h d| Blue
R b a e t m t e a r i y ning| BReridgh(Ut gnrdeeern2/0%)
Sensor error**| Pfliocwkeerrinogffreadftetwr ice

Instructions to Features

Turning on the Device
Press the button once to turn on the device.

Connecting the Bluetooth

1. Make sure that the device is turned on.
2. Install the correlated smartphone app.
3. Follow the smartphone app instructions and press the button once to connect.
4. When connected, the LED signal light will turn blue.
   (The details of the LED signal light are included in the section “Introduction to BULO”)

Charging

1. Connect enclosed USB charging cable to the C-Type charging port on the device to charge it.

2. The LED signal light will turn on when connection is successful.
   (The details of the charging status are included in the explanation about the LED signal light under the “Introduction to BULO”)

3. When done charging, separate the USB charging cable and device and store each in the optimum fashion.

Information for Optimal Use

1. Use after checking the connection status through the LED signal light.

2. Use after checking that the mouthpiece and device are properly assembled.

3. Use after checking the battery status.
   (Battery status can be checked through the device or connected app with the touch of a button. If the device needs to be charged, the LED signal light will turn red. In this case, use the enclosed cable to charge the device.)

4. Use after separating the device from the USB charging cable.

5. Place the mouthpiece in the mouth during use to avoid wind caused by breathing.

6. After each use, place the device in the enclosed pouch and store away.

7. After disconnecting the bluetooth, the device will automatically turn off after a given time.

8. Do not move the device while charging.

Troubleshooting

Before reporting a problem, please check the items listed below.

the device.

The Bluetooth isn’t connecting.| · Make sure that the smartphone can use Bluetooth.

· Restart the smartphone’s Bluetooth function and try        connecting to the Bluetooth again.

· Restart the device and tr connecting again.

· Clean up any possible obstructions between the  smartphone and the device.

The device isn’t operating normally| · Push the reset button (small hole) located besides the serial number on  the    bottomof the device with a pin.
Issue| Measure
---|---
The device isn’t operating well.| ·Use the device in a proper area that is not in polar extremities of temperature or humidity.

·Use the device indoors avoiding wind.

·Use the device in areas that cannot be reached by wind from  fans, air conditioning, open windows or

air purifiers.

The Bluetooth may not connect well due to the surroundings and the type of Bluetooth device.

portoduct Specifications

Output

Weight

| 3.7V, 40mA

66g

Dimensions|
(W x H x D)

Materials

| 140 x 45 x 37(mm)

PC/ABS, PP

Communications| Bluetooth 5
|
Battery| Internal Li-PO Battery (300mAh)
Charging Type| USB C-Type
Range| 10L/M ~ 840L/M
Recommended Temperature| 5℃ ~ 45℃

Product Storage and Maintenance

Transport

1. When the product is purchased, it will be placed in a packaging box and transported to the customer.

Cleanliness

1. Use a non-abrasive lint-free dry cloth to clean the device.
2. Avoid using any liquid or chemical products when cleaning this device as doing so can result in deterioration or other complications. Only use dry cloths when cleaning.
3. The mouthpiece can be cleaned with water but avoid using any detergent, soap or other chemical products.
4. Boiling or hot water can cause deterioration or morphing so only use cold water to clean the mouthpiece.
5. Pay attention to avoid damaging the filter when cleaning the mouthpiece.

Mouthpiece Usage Period

1. We recommend cleaning the mouthpiece and changing it regularly to maintain personal hygiene as the enclosed mouthpiece is only semi-permanent.
2. If the connecting portion of the mouthpiece is separated or the filter is damaged, foreign objects may enter the mouth during calibration. In this case, change to a new mouthpiece immediately.
3. To protect users from infections, we recommend keeping your mouthpiece to yourself without sharing with others.

FCC Rules

FCC ID: 2AXY8-BULO-H01
FCC Compliance Statement
(for products subject to part 15)
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions :
(1) This device may not cause harmful interference, and (2) this de must accept any interference received, including interference that may cause undesired operation. (Part 15 Subpart A, 15.21)
The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.(Part 15 Subpart B, 15.105)

NOTE : This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference
to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception.This can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures :

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Address: #815 Gieobdosi-ro 200,
Jijeong-myeon, Wonju-si,
Gangwon-do, South Korea
Telephone: (+82) 2-6085-1105
Homepage: https://www.breathings.co.kr
This product is a non-medical device
and should be used appropriately.
FCC ID is on the rear view of the body and it can be viewable by removing the mouthpiece without any tool.

References

• Breathings

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>