CYP CPLUS-SDI2H Video Set HDMI Converter Instruction Manual

CPLUS-SDI2H
12G-SDI to HDMI Converter

Operation Manual

CPLUS-SDI2H Video Set HDMI Converter

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI licensing Administrator, Inc.

INTRODUCTION

This 12G-SDI to HDMI Converter allows SDI signals up to 4K UHD + to be converted for display on standard HDMI video displays. This makes it easier for professionals to monitor or output professional SDI video production sources on standard, relatively low-cost, HDMI displays while allowing the original SDI signal to continue to be looped on to other SDI equipment in their production environment. Additionally, the inclusion of a 3.5mm analog stereo output lets the user monitor the audio using simple powered speakers or headphones. Basic control is available via front panel buttons.

APPLICATIONS

• Display 12G-SDI video signals on standard 4K HDMI displays
• Broadcast SDI to consumer HDMI video signal conversion
• 12G-SDI signal extension via re-clocked loop output

PACKAGE CONTENTS

• 1× 12G-SDI to HDMI Converter
• 1× 5V/2.6A DC Power Adapter
• 1× Operation Manual

SYSTEM REQUIREMENTS

• SDI source equipment such as editing/recording decks, professional cameras, or video broadcast equipment.
• HDMI receiving equipment such as HDTVs, monitors, or audio amplifiers.

FEATURES

• HDMI 2.0 and DVI 1.0 compliant
• 1 SDI video input
• 3 mirrored outputs (2×HDMI, 1×12G-SDI) & 1 analog stereo audio output
• Supports up to 4K UHD (12Gbps, 4K@50/60Hz 4:2:2, 8-bit) digital video input
• SDI input supports the following SMPTE standards: ST 292-1 Level A, ST 425-1, ST 2081-10, ST 2082-10
• Looped SDI output is re-clocked
• SDI signal extension distance varies based on signal type: 80 meters (12G-SDI), 100 meters (6G-SDI) 200 meters (3G-SDI), or 260 meters (HDSDI)
• 4K sources can be optionally downscaled to 1080p when output over the HDMI outputs to support lower cost local monitoring options
• Supports pass-through of LPCM audio (up to 8 channels)
• Controllable via front panel controls

OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

1. SERVICE Port: This port is reserved for firmware update use only.

2. SDI IN LEDs: These LEDs will illuminate to indicate the SDI format currently in use on the SDI input.

3. PWR LED: This LED will illuminate to indicate the unit is on and receiving power.

4. SCALE LED: This LED illuminate when the HDMI outputs are being downscaled.

5. HDMI OUT A~B LEDs: These LEDs will illuminate to indicate when a valid sink has been detected on the associated output port. When no sink is detected the LED will remain off.

6. SERVICE Button: Press this button to put the unit into its firmware update mode.
   Firmware Update Process: To update firmware after pressing the button, connect the unit to a PC/laptop via the Micro-USB Service port and the unit will appear as an external drive. Drag an appropriate firmware file onto this drive and the unit will  automatically begin the update process. After the update completes, the unit will automatically reboot.

7. SCALE Button: Press this button to enable or disable the HDMI outputs’ 4K to 1080p downscaling function.
   Note: 3840×2160 will be downscaled to 1920×1080. 4096×2160 will be downscaled to 2048×1080.

8. L/R OUT Port: Connect to powered speakers or an amplifier for analog stereo audio output.

6.2 Rear Panel

1. SDI IN Port: Connect to SDI source equipment such as editing/recording decks, professional cameras, or video broadcast equipment. SDI signals up to 12G-SDI are supported.

2. SDI OUT Port: Connect to SDI receiving equipment such as editing/ recording decks, professional studio monitors, or video broadcast equipment.
   Note: This output is re-clocked to support sequential daisy chain cable extensions, without signal loss, if desired.

3. HDMI OUT A~B Ports: Connect to HDMI TVs, monitors, or amplifiers for digital video and audio output.

4. DC 5V Port: Plug the 5V DC power adapter into this port and connect it to an AC wall outlet for power.

CONNECTION DIAGRAM

SPECIFICATIONS

8.1 Technical Specifications

ST 425-1
ST 2081-10
ST 2082-10
Input Ports| 1x12G-SDI (BNC)
Output Ports| 1x12G-SDI (BNC)
2xHDMI (Type-A)
1xUnbalanced Stereo Audio (3.5mm)
Service Port| 1xUSB 2.0 (Micro-B)
Power Supply| 5V/2.6A DC
(US/EU standards, CE/FCC/UL certified)
ESD Protection (HBM)| ±8kV (Air Discharge)
±4kV (Contact Discharge)
Dimensions (WxHxD)| 128mmx25mmx75mm [Case Only] 128mmx25mmx94mm [All Inclusive]
Weight| 347g
Chassis Material| Metal (Steel)
Chassis Color| Black
Operating Temperature| 0°C — 400° C/32 F — 104°F
Storage Temperature| -200° C — 60 C/-4 F — 1400° F
Relative Humidity| 20 — 90% RH (Non-condensing)
Power Consumption| 4.95W

8.2 VIDEO SPECIFICATIONS

Vacuum - Symbol 5](https://manuals.plus/wp-content/uploads/2023/07/SEALEY- VS0220-Brake-and-Clutch-Bleeder-Pneumatic-Vacuum-Symbol-5.jpg)| |
1280×768p@60/75/85| | |
1280×800p@60/75/85| | |
1280×960p@60/85| | |
1280×1024p@60/75/85| | |
1360×768p@60| | |
1366×768p@60| | |
1400×1050p@60| | |
1440×900p@60/75| | |
1600×900p@60RB| | |
1600×1200p@60| | |
1680×1050p@60| | |
1920×1080i@50/59.94/60| | |
1920×1080psf (4:2:0)| | |
1920×1080p@23.98/24/25/29.97/30| | |
1920×1080p@50/59.94/60/100/120| | |
1920×1200p@60RB| | |
2560×1440p@60RB| | |
2560×1600p@60RB| | |
2048×1080p@23.98/24/25/29.97/30| | |
2048×1080p@50/59.94/60| | |
3840×2160p@23.98/24/25/29.97/30| | |
3840×2160p@50/59.94/60 (4:2:0)| | |
3840×2160p@24, HDR10| | |
3840×2160p@50/60 (4:2:0),HDR10| | |
3840×2160p@50/59.94/60| | |
4096×2160p@23.98/24/25/29.97/30| | |
4096×2160p@50/59.94/60 (4:2:0)| | |
4096×2160p@24, HDR10| | |
4096×2160p@50/60 (4:2:0), HDR10| | |
4096×2160p@50/59.94/60| | |

8.3 Audio Specifications
8.3.1 Digital Audio

SDI Input / Output

LPCM
Max Channels| 8 Channels
Sampling Rate (kHz)| 48
Bitstream
Supported Formats| None
HDMI Output
LPCM
Max Channels| 2 Channels
Sampling Rate (kHz)| 48
Bitstream
Supported Formats| None

8.3.2 Analog Audio

Analog Output

Max Audio Level| 2Vrms
THD+N| < −80dB@0dBFS 1kHz (A-wt)
SNR| > 70dB@0dBFS
Frequency Response| < ±3dB@20Hz~20kHz
Crosstalk| < −60dB@10kHz
Impedance| 600Ω
Type| Unbalanced

8.4 Cable Specifications

8-bit
High Speed HDMI Cable
HDMI Output| 15m| 10m| 5m| 3m
Coaxial SDI Cable (Belden 1694A  6GHz Cable)
SDI Input| 260m| 200m| 100m| 80m
SDI Output| 260m| 200m| 100m| 80m

Note: SDI cable distance measurements are based on Belden 1694A 6GHz cable. Operating distance may vary if different quality cables are used.
Bandwidth category headings are representative examples only, and do not indicate this product’s support for any specific resolution or color bit depth.

Bandwidth Category Examples:

• 1080p (FHD Video)
  – Up to 1080p@60Hz, 12-bit color
  – Data rates lower than 5.3Gbps or below 225MHz TMDS clock

• 4K30 (4K UHD Video)
  – 4K@24/25/30Hz & 4K@50/60Hz (4:2:0), 8-bit color
  – Data rates higher than 5.3Gbps or above 225MHz TMDS clock but below 10.2Gbps

• 4K60 (4K UHD + Video)
  – 4K@50/60Hz (4:4:4, 8-bit)
  – 4K@50/60Hz (4:2:0, 10-bit HDR)
  – Data rates higher than 10.2Gbps

ACRONYMS

CYPRESS TECHNOLOGY CO., LTD.
www.cypress.com.tw

References

• Cypress Technology Co., Ltd. a ProAV solution provider. CYP target on vertical markets of enterprise, education, hospitality, Industry IoT and medical.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>