ErGear EGOC3 Office Chairs Instruction Manual
- June 14, 2024
- ERGEAR
Table of Contents
INSTRUCTION
MANUAL
Rev03(A)
EGOC3
EGOC3 Office Chairs
Office Chair
Features
Home office use
IMPORTANT SAFET Y INFORMATION
- Check package contents against supplied parts and hardware list to confirm that all components were received undamaged. Do not use damaged or defective parts. lf you require replacement parts, please contact our technical support line at 1-800-651-9525 (US/CA) / 44-808-196-3875 (UK) or cus- tomer service at support@ergear.com.
- Carefully read all instructions before attempting installation. If you have any concerns or questions, please contact our technical support line at 1-800-651-9525 (US/CA) / 44-808-196-3875 (UK) or customer service at support@ergear.com.
- Only (1) person should sit in the chair at a time.
- Only use the chair on level flooring.
- Children under 5 years of age should not operate the chair alone.
- Please do not sit on the armrest. Sitting on the armrest can damage the chair and lead to injury.
- Don’t stand on the chair or use it as a ladder or stair.
- Do not put heavy objects on the chair, or use it a trolley.
- To avoid injury, please keep hands away from the seat lift mechanism during operation.
- Do not use items with sharp edges or hooks near the chair.
- Keep the chair away from flame and heat sources.
- Do not sit on the edge of the chair. Sit correctly in the chair by utilizing the full seat with weight centered over the base. Use armrests for stability when standing up from the sitting position.
- To avoid tipping over, do not lift legs up while tilting the backrest or rocking.
Care And Maintenance
How To Clean
It is recommended that the office chair be thoroughly cleaned at least once a
month to maintain condition and functionality.
- Use a vacuum cleaner to suck up the dirt that may be resting on the seat.
- Use a damp cloth to wipe the armrest clean.
- The casters will stick if not maintained regularly. Brush the casters with water and wipe clean with a damp cloth.
- If dirt solidifies on the surface of the casters, use soap and water to clean it off.
- Use a dry cloth to finish cleaning, or leave your office chair in a ventilated area to air dry.
Maintenance Tips
- Direct sunlight can ruin an office chair over time, degrading most fabrics and materials. Keep your office chair out of direct sunlight.
- Humid conditions may lead to the formation of mildew on fabric and / or rust on metal parts. Do not keep your office chair in a damp environment.
- Be careful with drinks, food, or any type of liquids when you are near your chair. If a spill happens, clean and attend to stains immediately.
- Avoid the use of sharp objects or blades near the office chair that may cause damage.
- If possible, cover the chair to protect it from dirt and dust.
- Regularly examine the chair to ensure that all nuts and bolts are correctly fastened, including those connecting the seat, arms, back, and chair mechanics.
Installation
Remove the
decorative cover [02b] from the leg connector [02a] and save it for use in
Step 3. Then insert the legs [01] into the leg connector [02a] and secure with
the bolts [A]. 
Press the casters [03] firmly until they click into the
holes on the legs.
Attach the decorative cover [02b] to the leg connector
[02a], then press the gas lift cylinder [04] into the leg connector
[02a].
Attach
the armrests [06] to the seat with the bolts [B].Secure the mechanism [07] onto the
seat [05] using the bolts [C].
Insert the backrest [08] at your desired position, then
tighten the bolts [D] to secure it in place.
Align
the hole underneath the chair with the gas lift cylinder. Press the seat down
to secure the chair to the gas lift cylinder.
Secure the headrest [09] to the backrest
[08] with the bolts [E].
Lumbar Height Adjustment
To raise
the lumbar support, hold and lift the two ends of the support up to the level
(total 4 levels), then the adjusters lock automatically. To lower the lumbar
support, pull the support to the top and let it drop to the bottom, then the
adjustment should start again.
(US/CA) 1-800-651-9525
(UK) 44-808-196-3875
https://ergear.com
support@ergear.com
supportjp@ergear.com (JP)
AMZLAB GmbH
Laubenhof 23,45326 Essen
info@amz-lab.de
THEMIS AR support ltd.
85 Great Portland St, London, United Kingdom.
info@amz-lab.de
Manufacturer: BESTQI INNOVATION (HONG KONG) TECHNOLOGY CO., LIMITED
Address: FLAT/RM 185 G/F HANG WAI IND CENTRE 6 KIN TAI ST TUEN MUN NT
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>