dahua IPC-FX6F-B Consumer Camera Instructions
- June 5, 2024
- Dahua
Table of Contents
dahua IPC-FX6F-B Consumer Camera
Legal and Regulatory Information
Legal Considerations
Video surveillance can be regulated by laws that vary from country to COuntry.Check the laws in your local region before using this product for Surveillance purposes.
Disclaimer
Every care has been taken in the preparation of this document. Please inform your nearest Dahua office of any inaccuracies or omissions. Dahua Technology shall not be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice. Dahua Technology makes no warranty of any kind with regard to the material contained within this document, including, but not limited to, the implied waranties of merchantability and fitness for a particular purpose. Dahua Technology shall not be liable or responsible for incidental or consequential damages in connection ith the furnishing, performance or use of this material. This product is only to be used for its intendednurnose
Intellectual Property Rights
Dahua Technologyretains all intellectual property rights relating to
technology embodied in the product described in this document.
Equipment Modifications
This equipment must be installed and used in strict accordance with the instructions given in the user documentation. This equipment contains no user- serviceable components. Unauthorized equipment changes or modifications will invalidate all applicable regulatory certifications and approvals.
Trademark Acknowledgments
@ hua, @!l!Pa , H□CVI, 1mou have registered trademarks or trademark
applications of Dahua Technology in various jurisdictions. All other company
names and products are trademarks or registered trademarks of their respective
companies. Regulatory Information European Directives Compliance
Regulatory Information
European Directives Compliance
This product complies with the applicable CE marking directives and standards:
- .Low Voltage (LVD) Directive 2014/35/EU.
- Electromagnetic Compatibility (EMC) Directive 2014/30/EU.
- Restrictions of Hazardous Substances(RoHS) Directive 2011/65/EU and its amending Directive (EU) 2015/863.
- A copy of the original declaration of conformity may be obtained from Dahua Technology.
- The most up to date copy of the signed EU Declaration of Conformity (DoC) can be downloaded from: www.dahuasecurity.com/support/notice
CE-Electromagnetic Compatibility (EMC)
This digital equipment is compliant with Class B according to EN 55032.
CE-Safety
This product complies with IEC/ENUL 60950-1 or IEC/EN/UL 62368-1, Safety of
Information Technology Equipment.
Declaration of Conformity CE (Only for the product has RF function)
Hereby. Dahua Technology declares that the radio equipment is compliant with Radio Equipment Directive (RED) 2014/53/EU. The full text of the EUJ declaration of conformity is available at the following internet address www.dahuasecurity.com/support/notice
USA Regulatory Compliance
FCC RULES
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
Attention that changes or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate thee
equipment.
Note: This product has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This product generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance With the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this product does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- .Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. FCC SDOC can be downloaded from: Statementhttps://us.dahuasecurity.com/support/notices/
RF exposure warning (Only for the product has RF communication function)
This equipment must be installed and operated in accordance with provided
instructions and the antenna(s) used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all personss and must not
be co-located or operating in conjunction with any other
antenna or transmitter. End-users and installers must be provided with antenna
installation instructions and transmitter operating conditions for satistying
RF exposure compliance. This equipment should be installed and operated with a
minimum distance 20cm between the radiator and your body.
Canada Regulatory Compliance
ICES-003 This Class B digital apparatus complies with Canadian ICES-003. This
device complies with Industry Canada licence-exempt RSS standard(s). Operation
is subject to the following two conditions
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
RF exposure warning (Only for the product has RF communication function)
This equipment should be installed and operated with a minimum distance 20cm
between the radiator and your body. Under Industry Canada regulations, this
radio transmitter may only operate using an antenna of a type and maximum (or
lesser) gain approved for the transmitter by Industry Canada. To reduce
potential radio interference to other users, the antenna type and its gain
should be so chosen that the equivalent isotropically radiated power
(e.i.r.p.) is not more than that necessary for successful communication.
Japan Regulatory Compliance VcCI
These products comply with the requirements of VCCI Class B Information
Technology Equipment.
Batteries
Correct disposal of batteries in this product
This marking on the battery indicates that the batteries in this product
should not be disposed of with other household waste at the end of their
working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that
the battery contains mercury, cadmium or lead above the reference levels in
Directive 2006/66/EC and its amending Directive 2013/56/EU. If batteries are
not properly disposed of, these substances can cause harm to human health or
the environment
CAUTION
Risk of explosion if battery is replaced by an incorrect type. Dispose of Used
batteries according to the instructions.
Safety
The product complies with IECENUL 60950-1, Information Technology Equipment-
Salely- Part 1: General Requirements or complies ith EC/EN/UL 62368-1,
Audiovideo, information and communication technology equipment- Part 1: Safety
requirements. IF the power supply to the product is trom external power
adaptor without connecting to AC Mains, and tne product is not shipped with
power adaptor, cstoners are reu exe oGE0 Source (LPs)
Waste Electrical and Electronic Equipment (WEEE) statements Disposal and
Recycling
When this product has reached the end of its useful life, dispose of it
according to local laws and regulations. For information about your nearest
designated collection point, contact your local authority responsible for
waste disposal. In accordance with local legislation, penalties may be
applicable for incorrect disposal of this waste.
DISPOSAL
This symbol means that the product shall not be disposed of together with
household or commercial waste. Directive 2012/19/EU on waste electrical and
electronic equipment (WEEE) is applicable in the European Union member states.
To prevent potential harm to human health and the environment, the product
must be disposed of in an approved and environmentally safe recycling process.
For information about your nearest designated collection point, contact your
local authority responsible for waste disposal. Businesses should, contact the
product supplier for
information about how to dispose of this product correctly.
Privacy Protection Notice
As the device user or data controller, you might collect personal data of
others such as face, fingerprints, car plate number, Email address, phone
number, GPS and so on. You need to be in compliance with the local privacy
protection laws and regulations to protect the legitimate rights and interests
of other people by implementing measures, including but not limited to:
providing clear and visible identitication to intorm dala subject the
existence of surveillance area and providing related contact.
About the Manual
- The manual is for reference only. If there is inconsistency between the manual and the actual product, the actual product shall prevail.
- We are not liable for any loss caused by the operations that do not comply with the manual.
- The manual would be, updated according to the latest laws and regulations of related jurisdictions. For detailed information, refer to the paper manual, CD-ROM, QR code or our official website. If there is inconsistency between paper manual and the electronic version, the electroniC versian sha preva
- All the designs and softiware are subject to change without prior written notice. The product updates mighl cause some diferences between the actual product and the mânual. Please contact the customer Service for the latest program and supplementary documentation.
- There stilmight be devation in technical data, functions and operations description, or errors in print. If there is any doubt or dispute, we reserve une ignt or nal explanauon
- Upgrade the reader software or try other mainstream reader software if the manual (in PDF fomat) cannot be opened.
- All trademarks, registered trademarks and the company names in the manual are the prOperties of their respective owners.
- Please visit our website, contact the supplier or customer service if there is any problem occurring when using the device.
- If there is any uncertainty or Controversy, we reserve the right of final explanation.
Support
Should you require any technical assistance, please contact your Dahua distributor. your questions cannot be answered immediately, your distributor will forward your queries through the appropriate chaninels to ensure a rapid response. If you are connected to the Intemet, you can:
- Download user documentation and software updates.
- Search by product, category, or phrase.
- Report problems to Dahua support staff by logging in to your private
- Support area.
- Chat with Dahua support staff.
- Visit Dahua Support at www.dahuasecurity.com/sunnort,
Contact Information
- ZHEJIANG DAHUA VISION TECHNOLOGY CO. LTD.
- Address: No.1199, Bin’an Road, Binjiang District, Hangzhou, P.R. China
- Postcode: 310053
- Tel: +86-571-87688883
- Fax: +86-571-87688815
- Email: [email protected]
- Website: www.dahuasecurity.com
**Important Safeguards and Warnings**
This Chapter describes the contents covering proper handling of the device, hazard prevention. and prevention of property damage. Read these contents carefully before using the device, comply with them when using, and keep it well for future reference.
Safety Instructions
The following categorized signal words with defined meaning might appear in
the manual.
Safety Requirement
- Abide by local electrical safety standards to ensure that the voltage is stable and complies with the power supply requirement of the device.
- Transport, use, and store the device under the allowed humidity and Temperature conditions. Refer to the corresponding technical
- specifications of device for specific working temperature and humidity.
- Do not place the device in a location exposed to dampness, dust, extreme hot or cold, strong electronic radiation, or unstable lighting conditions.
- Do not install the device in a place near the heat source, such as radiator, heater, furnace, or another heat-generating device to avoid fire.
- Prevent liquid from flowing into the device to avoid damge to intermal components.
- Install the device horizontally or install on the stable place to prevent it from fallng
- Install the device in a well-ventilated place, and do not block the ventilation of the device
- Do not disassemble the device arbitrarily.
- Avoid heavy stress, violent vibration, and soaking during during transportation. storage, and installation. Complete package is necessary dunng tne transportation
- Use the factory package or the equivalent for transportation.
Battery
Low battery power affects the operation of the RTC, causing it to reset at
every power-up. When the battery needs replacing. a log message will appear in
the product’s server report. For more information about the server report, see
the product’s setup pages or contact Dahua support
WARNING
- Risk of explosion if the battery is incorrectly replaced.
- Replace only with an identical battery or a battery which is recommended by Dahua.
- Dispose of used batteries according to local regulations or the battery