therapure TP150 Desktop Purifier with UV Instruction Manual

therapure TP150 Desktop Purifier with UV

WARNING

• EN Always observe all safety notes (included separately in delivery).

TECHNICAL DATA

• Mains voltage: 120 V ~ 60 Hz
• Power consumption Standby: 0.5 W
• Min – Max: 1 – 9 W
• Operation noise: level 48 dB(A)
• CADR: (Dust / Smoke / Pollen) 39 cfm (66 m3/h) / 31 cfm (53 m3/h) / 32 cfm (54 m3/h)
• Dimensions: L × W × H 6.4 × 6.4 × 40.9 in (162 × 162 × 276 mm)
• Weight: (empty) 2.5 lbs (1.15 kg)

INTRODUCTION

Thank you for purchasing the Therapure® TP150 air purifier. With UV light and filtration to clean the air, the Therapure® TP150 air purifier will greatly im- prove the quality of the air in your home, office, or other environments. Once you’ve experienced the purity of Therapure® TP150 air, visit us at our web- site to find out more ways to improve the quality of your air and your life with our premium products and upgrades. Please be sure to read the follow-ing instructions carefully to ensure optimal perfor-mance and safety.

SCOPE OF DELIVERY

OVERVIEW AND PART NAMES

1. Therapure TP150
2. Filter & Prefi lter
3.  Bottom Cover

STARTING UP

1. Place the device on a flat surface
2. Plug the power cord into a power outlet.
3. Turn it on.

SYMBOLS AND DISPLAYS

Power Button: Switch the appliance on and off
Fan Level / Filter Reset Button: Tapping once switches the fan levels L and H Hold for 3 sec. to reset the filter light

CLEANING AND MAINTENANCE

CARE INSTRUCTIONS

• Stagnant water can impair cleanliness and lead to unpleasant odors. This means regular maintenance and cleaning is necessary to ensure clean and unim-paired operation.
• Recommended cleaning and maintenance intervals vary depending on air quality, water quality and operating time.

WARNING

• Do not use alcohol or corrosive cleaning agents for cleaning.
• Always unplug the appliance from the power outlet before cleaning.

FILTER COMPARTMENT

Use a soft, damp cloth to clean the exterior.

1. Place your device upside down.
2.  Turn the bottom cover anti-clockwise until it un-locks.
3. Remove the filter.
4. Use a dry soft towel to clean the filter compart-ment.
5.  Place the filter back in the device and lock the bottom cover. Cleaning the Filter and Pre-Filter

After removing the combination Filter and Pre-Fil-ter from the device it can be cleaned with a vacuum cleaner and/or with a dry soft towel.
REPLACING THE FILTER
The filter should be replaced after the filter light turns on. After replacing the filter press the Reset Filter button for 3 seconds to reset the filter re- minder.

E N V I O N is a registered trademark of B O N E C O AG, Switzerland
B O N E C O North America Corp. 15821 Ventura Blvd., Encino, CA 91436

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>