Q-TRAN WD24-6.0 Warm Dim LED Strip User Guide

: June 14, 2024
: Q-TRAN

Table of Contents

Q-TRAN WD24-6.0 Warm Dim LED Strip
Product Information

Q-TRAN WD24-6.0 Warm Dim LED Strip

Product Information

Specifications

Model: WD24/6.0 – WET
Type: LED Strips – Warm Dim
LEED Certification: LEED v4
Materials and Resources (MR): Material Ingredient Reporting

LEED Certification

This product has a Declare label that meets specific criteria, such as being designated as Red List Free, LBC Red List Free, Declared, or LBC Red List Approved, and demonstrates the chemical inventory of the product to at least 0.1% (1000 ppm).

Indoor Environmental Quality (IEQ): Quality of Lighting
Color Rendering: This product meets the minimum Color Rendering Index (CRI) requirement of at least 90.

WELL Building Standard v2: Materials Concept – X09. Material Transparency, Part 1
This product meets the requirement of having a Declare label, operated by the International Living Institute.

WELL Building Standard v2: Materials Concept – X09. Material Transparency, Part 2
This product meets the following requirements:

All ingredients are disclosed down to 100 ppm.
All ingredients are publicly disclosed by the manufacturer, a disclosure organization, or a third party through a Declare label, operated by the International Living Future Institute.

WELL Building Standard v2: Light Concept – L08. Electric Light Quality, Part 1 (Enhance Color Rendering Quality)
This product meets the color rendering requirement of CRI 90.

Note
Specification is subject to change. Rev-10-23-23

Product Usage Instructions

Installation

Ensure the power is disconnected before installation.
Choose the desired location for the LED strips.
Clean the surface where the LED strips will be installed.
Peel off the adhesive backing of the LED strips.
Carefully stick the LED strips onto the cleaned surface.
Connect the LED strips to a suitable power source.
Test the LED strips to ensure they are functioning correctly.

Operation
To turn on the LED strips, simply connect them to a power source. To adjust the brightness, use the provided dimming control.

Maintenance
Regularly clean the LED strips with a soft, dry cloth to remove any dust or dirt. Avoid using harsh cleaning agents or abrasive materials that may damage the surface of the LED strips.

Safety Precautions
When handling the LED strips, always ensure that they are disconnected from the power source to prevent electric shock. Do not attempt to modify or repair the LED strips yourself; contact a qualified technician for assistance.

Frequently Asked Questions (FAQ)

Can I cut the LED strips to a specific length?
No, the LED strips should not be cut as it may damage the product and void the warranty.
Can I use the LED strips outdoors?
Yes, these LED strips are suitable for outdoor use. However, ensure that they are installed in a location protected from direct exposure to water or extreme weather conditions.
Can I connect multiple LED strips together?
Yes, you can connect multiple LED strips together using the provided connectors or extension cables. Ensure that the total power consumption does not exceed the recommended limit specified in the product manual.
Can I use a different dimming control with these LED strips?
It is recommended to use the provided dimming control specifically designed for these LED strips to ensure optimal performance. The use of a different dimming control may result in compatibility issues.

This document offers a quick view of sustainability credits that could be awarded through the use of this product. Please note that while Q-Tran products can have a direct impact on obtaining points for sustainability programs, there are additional factors controlled by specifiers and project managers that can earn additional points. These include overall project design, layout, construction practices, the selection of reflective/non- reflective surface treatments, the use of lighting control systems, etc.

LEED v4

| |

POTENTIAL POINTS

| |

INFORMATION

---|---|---|---|---

Materials and Resources (MR): Material Ingredient Reporting

| |

1

| |

This product has a Declare label that meets specific criteria, such as being designated as Red List Free, LBC Red List Free, Declared, or LBC Red List

Approved, and demonstrate the chemical inventory of the product to at least 0.1% (1000 ppm).

Indoor Environmental Quality (IEQ):
Quality of Lighting| | 1| | Color Rendering: This product meets the minimum Color Rendering Index (CRI) requirement of at least 90.

WELL Building Standard v2

| |

POTENTIAL POINTS

| |

INFORMATION

---|---|---|---|---

Materials Concept: X09. Material Transparency, Part 1

| |

1

| |

This product meets the following requirements: a. A Declare label, operated by the International Living Institute

Materials Concept: X09. Material Transparency, Part 2| | 1| | This product meets the following requirements: a. All ingredients are disclosed down to 100 ppm b. All ingredients are publicly disclosed by the manufacturer, a disclosure organization or a third party through the following: c. A Declare label, operated by the International Living Future Institute
Light Concept: L08. Electric Light Quality, Part 1 (Enhance Color Rendering Quality)

| | 1| | This product meets the following color rendering requirements: a. CRI ≥90

© 2023 Q-Tran Inc. All rights reserved 155 Hill St. Milford, CT 06460
203-367-8777
sales@q-tran.com
www.q-tran.com
Specification is subject to change.