SIRONA TV Infusion 2023.1 Senior Instruction Manual

 SIRONA TV Infusion 2023.1 Senior

Product Information

• Product Name: SIRONA.TV
• Model Name: Infusion 2023.1

Compliance: This device complies with Part 15 of the FCC Rules. It is subject to the following conditions: (1) It may not cause harmful interference, (2) it must accept any interference received, including interference that may cause undesired operation. The equipment also complies with FCC radiation
exposure limits for an uncontrolled environment.

Included in the Kit

1. Infusion
2. Holder
3. Stand Base
4. Screw
5. Power Adapter
6. HDMI/Ethernet
7. Remote (AAA Battery included)

Introduction
SIRONA.TV is a headless Linux device that connects to the network through Ethernet, WiFi, or an optional external 4G module. It has Bluetooth Low Energy (BLE) capabilities and connects to other BLE devices. SIRONA.TV is designed for telehealth services, including two-way video calls using a TV.

Product Structure
SIRONA.TV is a standalone Linux-based IoT (Internet of Things) device that connects to subordinate BLE devices such as Oximeters and Blood Pressure Monitors. It is connected to a cloud server to deliver telehealth services.

Power
 SIRONA.TV is powered by a 5.5V@2A adapter and has a backup 3.7V Lion battery.

Product Usage Instructions
Steps to Assemble SIRONA.TV

1. Connect the Base of Stand (3) and Holder (2) with Screw (4). Ensure the holder is movable.
2. Insert Infusion (1) into Holder (2) and ensure it fits well.
3. Connect the Antenna (5) by turning it around the antenna port.

Steps to Install SIRONA.TV

1. Prepare an area for your Infusion Device. It must be within 3 feet of an electric outlet and TV. Install 2 AAA batteries in the Remote Control.
2. Make the connections:
   • Connect one end of the HDMI cable to the Infusion Device.
   • Connect the other end of the HDMI cable to the TV’s HDMI port.
   • If your TV has multiple HDMI ports, take note of which one is used for SIRONA.TV.
   • Connect the Power Cord to the Infusion device and plug it into a wall outlet. You should hear a click and see a red light near the camera.
   • Connect to the network using either Wi-Fi or Ethernet. Refer to the network setup instructions in the next steps.

Network Setup on Infusion

Step 3A: Connect with Wi-Fi

1. Power on the SIRONA.TV box and it will show the Local page.
2. Using the remote, go to Wi-Fi Setup.
3. Find and select your Wi-Fi network.
4. Enter the Wi-Fi password using the remote control.
5. Press connect.

Step 3B: Connect with Ethernet Cable
Connect one side of the Ethernet cable to the Infusion (1) box and the other side to the Ethernet port.

Supplier’s Declaration of Conformity

• Trade name: Sirona. tv
• Model Name: Infusion 2023.1

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance  20cm between the radiator & your body.

Included in your Sirona.tv Kit

1. Infusion
2. Holder
3. Stand Base
4. Screw
5. Power Adapter
6. HDMI/Ethernet
7. Remote AAA Battery

Steps to Assemble Sirona. tv

Step 1: Connect the Base of Stand (3) and Holder (2) with Screw (4). Make sure the holder should be movable.
Step 2: Insert Infusion (1) in Holder (2) and make sure it fits well.
Step 3: Connect the Antenna (5) by turning around the antenna port of Infusion (1).
Infusion is now ready to be installed – see installation steps below!

Introduction

Know Your Sirona. tv

Steps to Install
Step 1: Prepare an area for your Infusion Device.

• Must be within 3 feet of an electric outlet and TV
• Install 2 AAA batteries in the Remote Control

Step 2: Make the connections!

• Connect one end of the HDMI cable to the Infusion Device.
• Connect the other end of the HDMI cable to the TV’s HDMI port.

NOTE
If your TV has more than one HDMI port, take note of which port is used for Sirona TV

• Connect the Power Cord to the Infusion device.
• Connect the Power cord to a wall outlet.

NOTE
You should hear a “click” and see a red light near the camera. Connect Network: Wi-Fi or Ethernet. See network setup in the next steps

Step 3: Network Setup on Infusion
Step 3A or 3B needs to be followed.
Step 3 A: Connect with Wifi

1. On Power of Sirona.TV box will show the Local CNE page
2. Using remote GoTo on Wi-Fi Setup
3. find and select your Wi-Fi network
4. Enter Wi-Fi password using a remote control
5. Press connect

Step 3 B: Connect with Ethernet Cable
Connect one side plug with the Infusion (1) box and the other with the Ethernet Port After the Network Connection TV will show the Home page with Apps- If Sirona. tv is linked to the patient else will show a 6 6-digit anchor code.

Know Your Remote

Product function
Sirona. tv is a headless Linux device. It connects to the network through Ethernet, WiFi, or an optional and external 4G module. Sirona. tv uses a BT interface to connect to other Bluetooth Low Energy Devices. Sirona. tv connects to a Television through an HDMI. Sirona. tv has 6 MICs to listen to users’ voices and uses the voice to take in users’ commands. It also connects to an external speaker.

Product Structure
Sirona. tv is a standalone Linux-based IOT (Internet Of Things) device that connects to other subordinate BLE devices such as BLE sensors such as Oximeter and Blood Pressure Monitors. The IOT is connected to a cloud server to deliver telehealth services to its users which include 2-way video calls using the TV.

Power
Sirona. tv is powered by a 5.5V@2A adaptor and a 3.7 Lion battery for backup.

Support & Contact Information
Phone +1-844-800-7233
E-mail info@sirona.tv

References

• Sirona.tv – Senior Living Solution
• Contact Us – Sirona.tv
• Best Home Health Care Software in USA - SafetyLabs.org

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>