OVO Central Vacuum Dual Volt Hose Universal 30ft User Guide
- June 14, 2024
- OVO
Table of Contents
Unit won’t stop or start
Hose on/off switch
When setting the hose switch to “OFF”, you must wait 3 seconds before the
vacuum shuts down.
lf you pressed the “ON/OFF” switch quickly, and time; The vacuum will seem to
always stay on. Set the switch to “OFF” and wait 3 seconds, the unit should
stop.
Option 1:
Option 2:
Hose not properly plugged in
Make sure to properly plug the hose in the inlet. (See the picture to see
proper plug-in method)
Make sure the black part is well aligned in the middle of the 2 small pins
Option 3:
The pin’s spring could be broken
lf the pins, once pushed, do not come up; the spring is probably broken and could cause the vacuum not to start or stop. In which case the spring must be fixed.
Option 4:
The ON/OFF switch might be broken
Insert the hose in the inlet and turn it 90 degrees. If vacuum start and then stop when the hose is removed from the outlet, the switch ned to be changed. If the unit do not start, proceed to option 5
Option 5
If all of the above work, please proceed to bypass. If the vacuum starts, see
the technician as there is a problem with the cable.
See Next page to know how to do a bypass
Documents / Resources
| OVO
Central Vacuum Dual Volt Hose Universal
30ft
[pdf] User Guide
Central Vacuum Dual Volt Hose Universal 30ft, Central Vacuum, Dual Volt Hose
Universal 30ft, Hose Universal 30ft, Universal 30ft
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>