ANTON BAUER LP Performance Series Battery Charger User Guide
- June 6, 2024
- ANTON BAUER
Table of Contents
ANTON BAUER LP Performance Series Battery Charger
Copyright © 2021 All rights reserved
All rights reserved throughout the world. No part of this document may be stored in a retrieval system, transmitted, copied or reproduced in any way, including, but not limited to, photocopy, photograph, magnetic or other record without the prior agreement and permission in writing of the Vitec Production Solutions.
Disclaimer
The information contained in this manual is believed to be correct at the time of printing. Vitec Production Solutions reserves the right to make the changes to the information or specifications without obligation to notify any person of such revisions or changes. Changes will be incorporated in new versions of the publication. We are making every effort to ensure that our manuals are updated on a regular basis to reflect changes to the product specifications and features. Should this manual not contain information on the core functionality of your product, please let us know. You may be able to access the latest revision of this manual from our website. Vitec Production Solutions reserves the right to make changes to product design and functionality without notification.
Trademarks
All product trademarks and registered trademarks are the property of The Vitec
Production Solutions. All other trademarks and registered trademarks are the
property of the respective companies.
Published by:
Vitec Production Solutions
Email:
technical.publications@vitecgroup.com
Safety
Important information on the safe installation and operation of this product.
Read this information before operating the product. For your personal safety,
read these instructions. Do not operate the product if you do not understand
how to use it safely. Save these instructions for future reference.
Warning Symbols Used in these Instructions
Safety cautions are included in these instructions. These safety instructions
must be followed to avoid possible personal injury and avoid possible damage
to the product.
WARNING! Where there is a risk of personal injury or injury to others,
comments appear supported by the warning triangle symbol. Where there is a
risk of damage to the product, associated equipment, process or surroundings,
comments appear supported by the word ‘Caution’.
ELECTRIC SHOCK Where there is a risk of electric shock, comments appear
supported by the hazardous voltage warning triangle.
Intended Use
The Anton/Bauer® Performance Series Chargers deliver all of the proven
reliability of previous Anton/Bauer chargers in a portable power system
addressing both Gold Mount® and V-mount configurations. The technology
advancements of this charger deliver the features and performance of several
essential power products in one economic and portable package while reducing
power consumption.
Electrical Connection
- WARNING! Risk of electric shock. Do not remove cover, no user serviceable parts inside the product.
- WARNING! Risk of electric shock. Always check cables for signs of damage. Damaged cables can cause personal injury and/or damage the equipment.
- WARNING! It is the responsibility of the local organisation to ensure that the product is periodically checked for electrical safety in accordance with local regulations.
- CAUTION! This product must be connected to a power supply of the same voltage (V) and current (A) as indicated on the product. Refer to the technical specifications for the product.
- CAUTION! AC Mains plug or appliance coupler is to be used as a power disconnect device; make sure it is readily accessible.
- CAUTION! All data connections to other devices must be made using shielded cables.
- CAUTION! Using alternative power sources will invalidate the system EMC liability.
- CAUTION! Do not exceed the current output limit of the product when powering auxiliary devices.
- CAUTION! When powering the charger using a generator, the generator must produce a sine wave or modified sine wave output, otherwise, the charger may be damaged.
- WARNING! RISK OF ELECTRICAL SHOCK: Refer servicing to qualified service personnel.
Basic Electrical Insulation (Class 1 Equipment)
- WARNING! This product is Class 1 equipment. For safe operation this equipment must be connected to a power supply that has a protective earth connection (US: ground).
**Operation
**
- WARNING! Special precautions and handling instructions are contained in this user guide and should be strictly adhered to for safe and reliable operation.
- WARNING! Never use flammable or combustible materials and solvents around batteries or chargers.
- CAUTION! The product should not be used outside the operating temperature limits. Refer to the product technical specifications for the operating limits for the product.
- CAUTION! Slots and openings are intended for ventilation purposes to ensure reliable operation of the product and protect it from overheating. Do not block or cover any slots and openings.
- WARNING! Protect the product from water, moisture and dust. The presence of electricity near water can be dangerous.
- WARNING! Charger must not to be exposed to dripping or splashing and not to be used near objects filled with liquids.
- WARNING! When cleaning the product, use a soft damp cloth only. Do not wet the exposed metal parts of the charging unit. Do not use solvents, detergents or scouring agents.
Maintenance
- WARNING! The fitting of non-approved parts or accessories, or the carrying out of non-approved alterations or servicing can be dangerous and could affect the safety of the product. It may also invalidate the terms and conditions of the product warranty.
- RISK OF ELECTRICAL SHOCK: Refer servicing to qualified service personnel.
Introduction
The Anton/Bauer® LP Performance Series Chargers deliver all of the proven
reliability of previous Anton/Bauer chargers in a portable power system
addressing both Gold Mount® and V-mount configurations. The technology
advancements of this charger deliver the features and performance of several
essential power products in one economic and portable package while reducing
power consumption. This design makes it ideally suited to fit on shelves,
table tops or other tight spaces. This user guide covers the safe and reliable
operation of the LP Performance Series chargers.
Important
Special precautions and handling instructions are contained in this user guide
and should be strictly adhered to for safe and reliable operation. Contact
Anton/Bauer Customer Support Group with any questions regarding this product.
Anton/Bauer Battery Compatibility Anton/Bauer LP Performance Series Chargers
are compatible with all Digital Series and most Logic Series® Anton/Bauer
batteries. For questions on product compatibility please contact the
Anton/Bauer Customer Support Group.
Third Party V-Mount Compatibility
We have tested specific competitor V-Mount batteries and verified their
compatibility (see table below). However, there is no guarantee that the LP
Performance Series Charger can charge any third party battery to 100% full
capacity. The list below does not constitute all of the potential compatible
batteries, therefore it is the recommendation of Vitec Production Solutions to
utilize Anton/Bauer batteries solely with compatible Anton/Bauer chargers to
avoid any potential performance degradation.
Components and Connections
Wi-Fi Capability
The LP Performance Series Chargers come standard with an integrated Wi-Fi
module to be utilized with a variety of features and functions released in
upcoming software revisions. The integrated Wi-Fi module will also be used for
future battery compatibility, so new batteries may be used on the LP
Performance Series Chargers as they are released.
Mini USB Port
Located at the back, this port is used to upgrade the firmware of the LP
Performance Series Chargers. For information, please contact the Anton/Bauer
Customer Support Group.
AC Mains Power
The AC Mains power connector is located on the rear of the charger.
Attaching a Battery to the Charger
To attach a battery to either the Gold Mount or V-Mount adaptor on the
charger:
- Slide the battery onto the adaptor, ensuring the Gold Mount T- stud or V-Mount are aligned in the corresponding slots.
- The battery is fully engaged when the latch makes an audible “click”.
To Release the Battery
- Depress the latch and hold.
- Slide the battery off the connector.
Operation
Self-Test
Upon applying AC mains power, the charger will initiate a brief self-test
mode. Self-test mode is complete when the charger LED indicates battery
information on the position being used.
Charging
As with all Anton/Bauer chargers, charging with a LP Performance Series
Charger is fully automatic. Mount any applicable battery to any open position
on the charger and the LP Performance Series Charger will automatically
determine the appropriate charge routine and execute it.
In some cases a battery may be discharged to a very low voltage level causing the battery to be unrecognizable to the charger when first attached.
Three Stage Charging Methodology
In general, the LP Performance Series Chargers (Gold Mount and V-Mount) will
deliver a three stage charge routine to each battery.
-
Stage One
Will deliver a high rate charge matched to the capabilities of the battery (typically a one or two hour rate, depending on battery type). During this stage, six separate cutoff methods are in operation, simultaneously, ensuring the fastest, safest charge for that battery. -
Stage Two
Charging is a BALANCING or “stabilizing” mode which calculates each battery pack type to offset any imbalance of the battery’s cells, created by unequal self-discharge or any capacity mismatch of the individual cells in the pack. This stage can vary in duration from zero to as much as 16 hours, depending on the condition of the battery. The Stage Two charge reduces current automatically as the battery charges maintaining the cells at a safe voltage level. A battery will typically leave Stage Two in 2-4 hours under average operating conditions.
-
Stage Three
Charging is the Anton/Bauer exclusive Lifesaver® maintenance mode. This patented pulse routine keeps batteries fully charged, free from self-discharge – indefinitely – without damaging heat associated with a so-called “trickle charge”. The Stage Three programming monitors the self-discharge of the battery, providing charge only when the battery self-discharges to about 95% of its capacity.
Anton/Bauer recommends that batteries remain on the charger and plugged into AC mains power for best results. The Lifesaver mode will keep them 100% charged.
Removal of AC Mains Power
If AC mains power is removed, it is highly recommended that the batteries are
removed from the charger, thus avoiding any additional self-discharge of the
battery.
LED Indicators
All LP Performance Series Chargers come standard with LED indicators. The LED
indicators are used to convey information about the current charge status of
the battery.
Technical Specifications
Physical Data
LP Performance QUAD
Height
3.60 inches (9.14 cm)
Length
12.20 inches (30.99 cm)
Width
9.00 inches (22.86 cm)
Weight
4.2 lbs (1.9 kg)
LP Performance DUAL
Height
3.60 inches (9.14 cm)
Length
7.20 inches (18.29 cm)
Width
9.00 inches (22.86 cm)
Weight
3.0 lbs (1.4 kg)
Environmental Data
Operating temperature range -0°C to +40°C (-32°F to +104°F)
Electrical Data
Supply Voltage
AC Input: 100-240 VAC, 50/60 Hz. Wide Range Input
In some cases a battery may be discharged to a very low voltage level causing the battery to be unrecognizable to the charger when first attached.
After Sales Support
At Vitec Production Solutions we take great pride in the quality of our
products and we also recognize that your experience with our products will be
even more positive and productive with strong, effective support to back them
up.
Vitec Production Solutions Service Centers are there to provide technical
support for customers and partners, via telephone or email. For more
information, including complete contact details, please go to:
support@vitecgroup.com
FCC Notice
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at their own expense. This equipment has been approved by one or more agencies. All changes and/or modifications not expressly approved by Anton/Bauer. could void the users’ warranty and authority to operate this equipment. There are no serviceable parts in this equipment.
Warranty
This warranty for the product specified in this document (“Product”) is given
by Vitec Production Solutions (“Anton/Bauer”), 14 Progress Drive, Shelton,
Connecticut 06484. If you (the purchaser of the Product from Anton/Bauer, or
the person for whom the Product was purchased, if it was a gift) have any
questions regarding Product applications, Product specification, or to obtain
warranty service on this or any Anton/Bauer product, contact the company at
the address above.
THIS PRODUCT MUST BE REGISTERED WITH ANTON/BAUER WITHIN 30 DAYS OF PURCHASE TO
ASSURE WARRANTY COVERAGE. REGISTER ONLINE AT:
www.antonbauer.com
Warranty registration, including the serial numbers of Anton/Bauer chargers
used with this battery, must be supplied to Anton/Bauer. Anton/Bauer will
warranty the Product only against defects in material and workmanship for the
period as follows from the date of purchase, in accordance with the terms set
forth below, and then, only if the Product is used exclusively in conjunction
with compatible Anton/Bauer chargers. If this charger is returned to
Anton/Bauer for warranty service it will be required that you provide model
names and serial numbers of compatible Anton/Bauer chargers with which this
product was used.
MAXX II Warranty 24 months: Anton/Bauer will repair or replace the Product at
Anton/Bauer’s option and cost. This warranty shall be effective only if
Anton/Bauer receives notice of such defects in materials or workmanship during
the period of the warranty. The liability of Anton/Bauer hereunder is
expressly limited to a claim for repair or replacement of the Product or as
otherwise stated herein at Anton/Bauer’s sole discretion. Notice of any claim
under this warranty shall be delivered to Anton/Bauer during the period of the
warranty and the Product shall be returned with its packaging promptly, at
your expense, to an Anton/Bauer Customer Support Center or to the address
above. Upon receipt of the Product and a record of your compliance with the
conditions of this warranty, Anton/Bauer will repair or replace the Product
and return it to you, or issue a credit, as applicable. You are responsible
for all shipping and handling charges to and from authorized facility.
THIS WARRANTY DOES NOT APPLY TO AND IS VOID IN THE CASE OF DEFECTS OR DAMAGE
RESULTING FROM ACCIDENTS, DISASTER, NEGLECT, MISUSE, IMPROPER INSTALLATION,
IMPROPER OR UNAUTHORIZED SERVICE OR MAINTENANCE, UNAUTHORIZED REPLACEMENT
PARTS OR ATTA CHMENTS; OR DYSFUNCTION OR MALFUNCTION OF, OR CAUSED BY, ANY
OTHER PRODUCT OR DEVICE.
Misuse includes any use of the Product in other than its intended application,
including the use of this Product with any charging device or accessory not
manufactured by and/or specified by Anton/Bauer. This warranty does not cover,
and Anton/Bauer assumes no responsibility for, any equipment or devices used
in conjunction with the Product.
ANTON/BAUER DISCLAIMS ANY LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
FOR BREACH OF ANY WRITTEN OR IMPLIED WARRANTY OF THE PRODUCT. UNDER NO
CIRCUMSTANCES WILL ANTON/BAUER BE RESPONSIBLE FOR ANY SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
This Warranty is to be construed and enforced in accordance with the law of
the State of Connecticut, including the provisions of the Uniform Commercial
Code as adopted and from time to time amended in the State of Connecticut, and
not the Convention for the International Sale of Goods. This choice of
Connecticut law is exclusive of any Connecticut law that would require
reliance on any law foreign to Connecticut. Should any action of law or in
equity be brought by any person under this Warranty, such action shall be
brought only in the United States District Court for the District of
Connecticut, or in any Superior Court in Fairfield County, Connecticut, USA.
Some states do not allow limitations on how long a warranty lasts, so the time
period limitation herein may not apply to you. Some states do not allow the
exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you. This warranty gives you specific
legal rights and you may have other legal rights which may vary from state to
state. Use of unauthorized equipment in conjunction with Anton/Bauer products
constitutes misuse under our warranties and may limit or void those
warranties. Anton/Bauer does not authorize, condone, recommend, or otherwise
assume any liability or responsibility resulting from the use of any battery,
charger, or accessory made by Anton/Bauer with any battery, charger or
accessory not manufactured, produced or sold by Anton/Bauer. Anton/Bauer only
authorizes the use of original Anton/Bauer products with this Product. Use
only original Anton/Bauer equipment with this Product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>