KENWOOD KCT-46 Ignition Sense Cable User Guide
- June 3, 2024
- KENWOOD
Table of Contents
KENWOOD KCT-46 Ignition Sense Cable
PRECAUTIONS
- The following product is exclusively for use with KENWOOD transceivers.
- To prevent possible accidents and damages, do not attempt to use this product with other types of transceivers.
ABOUT PRODUCT
USB PROGRAMMING INTERFACE CABLE
- This product is the cable to connect KENWOOD transceivers and the PC.
- Install the UART driver or USB driver from the supplied CD to the PC.
PROGRAMMING INTERFACE CABLE
- This product is the cable to connect KENWOOD transceivers and the PC.
FILTERED CIGARETTE LIGHTER CORD
- The cigarette lighter cable allows you to supply power to your transceiver from the cigarette lighter of your automobile.
- The cigarette lighter cable is equipped with a 2 A fuse. When the fuse blows, replace it with a fuse of the same rating.
CAUTION: 12 V DC ONLY
- Serious damage may result to your transceiver if this cable is connected to a voltage source greater than 16 V. Some vehicles have battery voltages of 24 V or greater.
REMOTE CONTROL KIT
- These products are the connection cable kits for installing the operation panel of KENWOOD mobile transceivers separately.
2015 JVCKENWOOD Corporation
B5A-1082-00
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>