S M S L AO200-MKII Home Audio Amplifier User Manual
- June 14, 2024
- S M S L
Table of Contents
USER MANUAL
Safety
- Istal s unit ina wel ventiated coo, iy, ciean plce- away from direct sunlgh, et sources, vibraton, dust, mosture, or . tes
- Use the voltage specifec on this unt Only. Using trisunit wih a igher votage than spaciied s dangerous and may caus fre, damage o this und, o personal iy, Our ‘ompany wilnot be held esponsibieforany damage resuting fom the use of this it Wit 3votage oiter than that specfied
- Do not attempt to modiy orfixthis unit by yourset. Contac aesperson or customer envice ‘when ay sevice s necced. The cabinetshoud never be openadfor any reasan.
- When not planing to usetis unit for long perods oftme (ie. when going on vecatio, isconnect he power cabefrom the AC wal outiet
Important note:
The productspecifcations and nformation mentoned in this manual are for
reference iy The content this manual s subjct to change without notice.
Warranty Terms
-
The Tem of senice
Foshan Shusngmusaiin Technlogy Co, Lid promises o affer good-auay products.Fthe prodcts roken n 7 cys afte purchasing when you us t normally you can choose to send it back forretum repacement o repaing (oniy the product coes ot afec the second saes
canbe retuned ). Repairingfor fee n one year fyou use t normaly. -
Date of purchase sin acccrdance wihthe date on invoce o receiptuesd by seler and 1y0u buy it cn fne, you can show the screenshot of rade.
-
If an inappropriste usage cause the unt camaged, the wartarty wilbe void As below.
= Al damages by nappropriae use, inclcing usngt under non-normalworking envronment orwihout Blowing the nstructicns
-
Dsmanting, efting, repaifng by ser n pivate.
» Causing damage by using some fitings instea ofthe desgnative or acredited ones.
+ Cannot provide aedibe proof of purchase.
» The QC orwarranty sickerof the body i damaged.
» Doss not bebong to our company’s produds.- Sending ft back o cur company for repaiig.
- Contact your SM.SLL Aui reseler fr a retun o replacemert.
Features
- New digital high-paver amplifier chip MAS332 from Infincon, Germary, higher quality vith high effciency and low power consumption;
- Using NIRC’s electronic volume conrol chip NIWI194 from lapan, precise: volume controland low dstortiory
- The balanced design, fram input to speaker output, greatly redicing distortion caused by signal transmission;
- Buit-in SMSL SDB patented sound and treble/bass adjustment for easy matching of a variety of speakers and music;
- Subwaofer pre out for 21 system appliation.
- New Bluctoath 5.0 reception, better sound qualty, longer transmission ditance!
- Allaluminum alloy CNC precision processing shel, anodizing technology and chamfeing pracess, exquiite workmanship and delicate touch;
- Color LCD display and user-fiendly operating sstem are simple and easy to understand, equipped with fullfeatured remote control function;
- Low powier standiy function to meet the latest European ErP2 standard;
- A large number of professional Hi-Fi audia companents are used to enhance the sound experience;
- High qualty gold-plated input and output terminals; Perfect protection circt for overheating, avercurent,etc.
- Buit-in high qualty power suppY, specialy designed for audic!
Specifications
Inputs………………………………………… XIR RCA,BT, USB
THDSN……………………………………………… 0004%
SNR…………………………….. 10608
Channel separation…………………………………. 8508
Input Senstivty /Input Impedance………………………………………… 200mv /472
Output Power……………………………………. E0WA2(40) / B2 (E0)
Power Consumption……………………………… 40W(Normal Valume)
Standby power……………………………….. osw
Siee…………………………………… 21064XI9Bmm(WxtHD)
Weight……………………………. 16k
Specifications are subject
Remote control
- Install 2 x AAA batteries as instructions.
- When using the remote control point it toward the remote con-trol sgnal recewver onthe main unit from a distance of 5 m (16 ft) or less. Do not place obstructions between the main unit and the remote control.
- The remote control might not work if the remote control signal receiver on the unit exposed to direct sunlight or bright light. If this occurs, try moving the unt.
Beware that use of this remote control could cause the unin-tentional operation of other devices that can be controlled by infra.
Operating the Remote Control
Function Introduction
- Display
- Remote window
- Function button
- Balanced input (XLR)
- Unbalanced input (RCA)
- SW output
- USB input
- Bluetooth input
- Right channel output
- Left channel output
- Power input
- Power switch
Note:
Please pay attention to the polarity when connecting the speakers, it must
follow the mark on the unit, to avoid any effect to the sound quality.
There are 6 pages of settings in this menu.
- INPUT
- EQ
- BASS
- TREBLE
- DIMMER
- BRIGHTNESS
INPUTS
- USB
- BALANCED
- UNBALANCED
- BLUETOOTH
EQ Setting
- Direct
- Tone
- SDB
- Bass
- Super Bass
- Rock
- Soft
- Clear
Bass adjustment range -10dB ~ +10dB
When the EQ mode is Direct or other EQ mode, changing the Bass will change the
EQ to Tone mode.
Treble adjustment range -10dB ~ +10dB
When the EQ mode is Direct or other EQ mode, changing the Treble will change
the EQ to Tone mode.
DIMMER 5second ~ 60 second
The range is 5 seconds-60 seconds. After setting, the screen will and the
screen will re-light up if you operate the remote control or the knob at any
time.
Brightness Level 1 ~ 6
Bluetooth operating instructionst
Step 2: Turn on the Bluetooth function of the mobile phone, search for ” “,
and tap to pairing. When the mobile phone displays “connected”, it has been
successfully connected.
Re-connection:
short press the Bluetooth button (FN) on the remote to Re-connect.
Long press the “Bluetooth” button(FN) on the remote control. After clearing
the pairing, some phones may no longer be able to search for ” “. In this
case, you need to delete the Bluetooth device ” ” which saved in the phone,
and then search and pairing again.
Factory Resett
shows the logo. Then stop pressing and restart the unit.
Package list
1 × Bluetooth antenna
1 × Remote control
1 × User manual
1 × Warranty card
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>