S M S L L AO100 Class D Amplifier Infineon User Manual
- June 5, 2024
- S M S L
Table of Contents
S M S L L AO100 Class D Amplifier Infineon
Safety Notes
- Install this unit in a well-ventilated, cool, dry, clean place away from direct sunlight, heat sources, vibration, dust, moisture, or cold.
- Use the voltage specified on this unit Only. Using this unit with a higher voltage than specified is dangerous and may cause fire , damage to this unit, or personal injury. Our company will not be held responsible for any damage resulting from the use of this unit with a voltage other than that specified.
- Do not attempt to modify or fix this unit by yourself. Contact alesperson or customer service when any service is needed. The cabinet should never be opened for any reason.
- When not planning to use this unit for long periods of time (i.e. when going on vacation), disconnect the power cable from the AC wall outlet.
Important note:
The product specifications and information mentioned in this manual are for
reference only. The content of this manual is subject to change without
notice.
Features
- German Infineon’s new technology class D power amplifier chip, higher quality, efficiency up to 92%, further reducing power consumption;
- Electronic volume control, without the potential noise of traditional resistor volume control noise when adjusting the volume.
- Preset multiple EQ modes.
- With tone control, the BASS and TREBLE can be adjusted separately.
- 3 analog surround modes.
- Subwoofer pre out for 2.1 system application.
- New Bluetooth 5.0 reception, better sound quality, longer transmission distance!
- High current adapter for dynamic response of audio.
- Extremely small size, more flexible placement.
- High-quality gold-plated audio connector.
- Whole aluminum alloy CNC shell, combined with beautiful looking and better heat dissipation.
- Equipped with full-featured high-quality remote control
Specifications
- Output power ………………………………………………………………….70W x 2(4Ω)
- Frequency response ………………………………………………………….20Hz-40KHz
- BASS or TREBLE GAIN …………………………………………………..-14dB ~ +14dB
- THD+N …………………………………………………………………………………0.004%
- Channel separation ………………………………………………………….109dB(1KHz)
- Input sensitivity ……………………………………………………………………400mVms
- SNR ………………………………………………………………………………………..104dB
Maximum input voltage
- Low gain…………………………………………………………………………. 2Vrms
- High gain……………………………………………………………………… 1.2Vrms
- Power consumption……………………………………………………………………..36W
- Standby power……………………………………………………………………………0.5W
- Dimensions ……………………………………………………150X39X128mm(WxHxD)
- Weight …………………………………………………………………………560g / 1.23Ibs
Remote control
- Install 2 x AAA batteries as instructions.
- When using the remote control, point it toward the remote con-trol signalreceiver on the main unit from a distance of 5 m (16 ft) or less. Do not place obstructions between the main unit and the remote control.
- The remote control might not work if the remote control signal receiver on the unit is exposed to direct sunlight or bright light. If this occurs, try moving the unit. Beware that use of this remote control could cause the unin-tentional operation of other devices that can be controlled by infra.
Operating the remote control
Note
This remote controller use 2 x R03/AAA batteries.
Display Interface and Instructions
- Knob
- Remote window
- Display
- RCA input
- SW OUT
- Bluetooth input
- Right channel output
- Left channel output
- AC power input(AC100-240V)
Package Accessories
- 1x SMSL AO100
- 1x Remote control
- 1x Bluetooth antenna
- 1x AC cable
- 1x User manual
- 1x Warranty card
User interface
Main
- When it is turned on, it will show
- Input: Bluetooth input, Line in.
- EQ adjustment：
- Direct
- Tone
- Bass
- Super Bass
- Rock
- Soft
- Clear
- 3 kinds of Surround mode without the Surround is
- Display in bass adjustment
- Display in treble adjustment
- Displayed in the brightness adjustment
- Gain control and low gain, maximum input voltage 2Vrms; high gain maximum input voltage 1.2Vrms
- Volume display
Read User Manual Online (PDF format)
Loading......