Veise Smart Locks for Front Door User Guide
- June 14, 2024
- Veise
Table of Contents
Veise Smart Locks for Front Door User Guide
IMPORTANT
Before pairing your lock, please reset your lock and verify if the original master code 1 23456 works.
Then please turn on the Bluetooth in your phone’s settings, wake up the keypad screen by touching it with your palm and keep the screen always on during the pairing.
HOW TO REGISTER
STEP1
Download “DDLock” App in Google Play or App Store
Scan QR code to download DD Lock App
STEP2
Tap on register to get started.
**STEP3
** Fill out the information and tap “Get Code”. The email inbox you registered will be sent a verification code to verify your account. Put the code you received, tap on “Register” to complete.
Notes:
The DDLock App is required to operate the lock. After the lock is properly
installed, make sure this step is performed by the lock owner.
PAIRING YOUR LOCK
Notes:
You may need to touch the keypad screen to wake up the keypad.
After pairing successfully, the master code will be changed to a random 7 digit number, and you can change it to your own master code in the App (Settings＞Basics＞Admin password).
STEP1
Tap on “=
STEP2
Tap on +Add Lock
STEP3
Tap on “Next
STEP4
Tap on “+
Installation Tips
IMPORTANT
Refer to the step 1 to learn the door is right handed or left handed.
Before tighten the interior assembly screws, test if it’s able to move the thumb turn to lock/unlock. If not, please go back to step 2 and reinstall.
If the direction of the slide swith is set incorrectly, it also can be changed in the DDLock App. (Settings＞Door opening direction)
STEP1
Right handed door
Left handed door
Right handed door
Move the slide switch to “R”
Turn the thumb turn to the Vertical position
Left handed door
Move the slide switch to “L”
Turn the thumb turn to the Horizontal position.