Anker A2347 20W USB-C Wall Charger User Manual
- June 14, 2024
- Anker
Table of Contents
Anker A2347 20W USB-C Wall Charger
- The product is designed for use with IT equipment only.
- Naked flame sources, such as candles, must not be placed on the product.
- The disconnection from line voltage is made by an AC plug.
- In case of broken cords or plugs, the product must be disposed of.
- If you want to clean the product, only use a dry cloth or brush.
- The socket outlet shall be installed near the equipment and shall be easily accessible.
- The power supply is not intended to be repaired by service personnel in case of failure or component defect (the product can be disposed of).
Using Your Product
For the fastest and safest charge, use an Anker® cable, your device’s original cable or another certified cable (such as MFi).
Specifications
- Input 100-240V~0.6A50-60Hz
- Output 5.0V 3.0A,15.0W / 9.0V 2.22A, 20.0W / 12.0V 1.67A, 20.0W (20.0W Max)
- Efficiency at Low Load (10%) 70.52%
- No-Load Power Consumption 0.06W
- Operating Temperature 0 ～ 25℃ / 32-77 ℉
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2347 complies with Directive 2014/35/EU & 2014/30/EU & 2011/65/ EU & 2009/125/EC & 2019/1782/EU. The full text of the EU Declaration of Conformity is available at the following internet address: https://www.anker.com
Hereby, Anker Innovations Limited declares that product type A2347 complies with Electrical Equipment (Safety) Regulations 2016 & Electromagnetic Compatibility Regulations 2016 & The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 & The Ecodesign for EnergyRelated Products Regulations 2010. The full text of the GB declaration of conformity is available at the following internet address: https://www.anker.com
Indoor use only
This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. The following importer is the responsible party (contract for EU and UK matters) Anker Innovations Deutschland GmbH | Georg-Muche-Strasse 3, 80807 Munich,
Germany
Anker Technology (UK) Limited | GNR8, 49 Clarendon Road, Watford,
Hertfordshire, WD17 1HP, United Kingdom
Customer Service
24-month limited warranty support@anker.com
support.mea@anker.com (For Middle
East and Africa Only)
Please note that your rights under the applicable law governing the sale of
consumer goods remain unaffected by the warranties given in this Limited