nVent RBWS1500C Vertical Pouring Basin Instructions
- June 15, 2024
- nVent
Table of Contents
nVent RBWS1500C Vertical Pouring Basin
Specifications
- Material: Graphite
- Diameter: 1.88
- Length 1: 5.38
- Length 2: 1.5
- Width: 3
- Height 1: 4.88
- Height 2: 2 3/4
- Unit Weight: 3.6 lb
Features
- Made from heat-resistant graphite
- Durable, re-usable and long-lasting
- Designed for use with T-Series and B-Series vertical sleeves
Additional Product Details
RBWS1481, RBWS1482, RBWS1499, and RBWS1500 pouring basins require one RBM2660 pouring basin frame (sold separately). Prior to installation, please read and understand all of the detailed instructions and safety notices provided in the nVent LENTON Cadweld Rebar Splicing System Instruction Manual. Sizes not shown may be available by special order. Contact your nVent LENTON representative for more information.
Product Usage Instructions
Step 1: Clearances Check
Before using the standard vertical pouring basin, ensure that the
clearances of the structure allow its installation. Measure the available
space to confirm compatibility.
Step 2: Installation
Follow these steps to install the standard vertical pouring basin:
- Prepare the pouring basin frame (RBM2660) if required.
- Place the pouring basin in the desired location.
- Ensure the basin is level and aligned properly with the vertical sleeves.
- Secure the pouring basin in place using appropriate fasteners or the pouring basin frame.
Step 3: Filler Material Flow
The compact size of the standard pouring basin helps ensure the best
possible flow of filler material. Fill the basin with the desired filler
material, following the manufacturer’s instructions.
Standard vertical pouring basins should be used whenever the clearances of the structure allow. The compact size of the standard pouring basins help ensure the best possible flow of filler material.
FEATURES
- Made from heat-resistant graphite
- Durable, re-usable and long-lasting
- Designed for use with T-Series and B-Series vertical sleeves
PRODUCT ATTRIBUTES
- Material: Graphite
- Diameter: 1.88″
- Length 1: 5.38″
- Length 2: 1.5″
- Width: 3″
- Height 1: 4.88″
- Height 2: 2 3/4″
- Unit Weight: 3.6 lb
ADDITIONAL PRODUCT DETAILS
- RBWS1481, RBWS1482, RBWS1499 and RBWS1500 pouring basins require one RBM2660 pouring basin frame (sold separately).
- Before installation, please read and understand all of the detailed instructions and safety notices provided in the nVent LENTON
- Cadweld Rebar Splicing System Instruction Manual.
- Sizes not shown may be available by special order. Contact your nVent LENTON representative for more information.
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials. Instruction sheets are
available at www.nvent.com and from your nVent customer service
representative. Improper installation, misuse, misapplication, or other
failure to completely follow nVent’s instructions and warnings may cause
product malfunction, property damage, serious bodily injury and death and/or
void your warranty.
North America
- +1.800.753.9221
- Option 1 – Customer Care
- Option 2 – Technical Support
Europe
- Netherlands:
- +31 800-0200135
France:
- +33 800 901 793
Europe
- Germany:
- 800 1890272
- Other Countries:
- +31 13 5835404
- APAC
Shanghai:
- + 86 21 2412 1618/19
Sydney:
- +61 2 9751 8500
FAQ
Q: What pouring basin frames are compatible with RBWS1481, RBWS1482, RBWS1499, and RBWS1500?
- A: RBWS1481, RBWS1482, RBWS1499, and RBWS1500 pouring basins require one RBM2660 pouring basin frame (sold separately).
Q: Where can I find detailed installation and safety instructions?
- A: Before installation, please read and understand all of the detailed instructions and safety notices provided in the nVent LENTON Cadweld Rebar Splicing System Instruction Manual.
Q: Are there other sizes available for pouring basins?
- A: Sizes not shown may be available by special order. Contact your nVent LENTON representative for more information.
Q: Can I use the standard pouring basin with other vertical sleeves?
- A: The standard pouring basin is designed for use with T-Series and B-Series vertical sleeves.
Q: How do I contact nVent for support?
- A: For support, you can contact nVent customer service representatives through the following numbers:
Europe Netherlands: +31 800-0200135
- France: +33 800 901 793
- Europe Germany: 800 1890272
- Other Countries : +31 13 5835404
- APAC Shanghai: + 86 21 2412 1618/19
- Sydney: +61 2 9751 8500
Disclaimer: Our powerful portfolio of brands includes nVent, CADDY, ERICO, HOFFMAN, RAYCHEM, SCHROFF, and TRACER. All trademarks belong to their respective owners. nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>