KINGSLIM D5-4K Dash Cam with WiFi User Manual
- June 14, 2024
- KINGSLIM
Table of Contents
- KINGSLIM D5-4K Dash Cam with WiFi
- Product Information
- What’s in the Box
- Camera Overview
- Installation
- Formatting the Memory Card
- Video Recording
- Icon Introduction
- Setup Menu
- Frequency
- G-Sensor
- Time Zone
- Screen Saver
- Download the App and GPS Player
- Using the “Kingslim” App
- DOWNLOAD OR DELETE VIDEOS AND PHOTOS
- Specifications
- Contact Us
- Documents / Resources
KINGSLIM D5-4K Dash Cam with WiFi
Product Information
Product Name | KingSlim D5 Dash Cam |
---|---|
Version | V1.1 |
Contact Information | Tel: 888-811-1140 |
(US)
Email: cs@kingslim.net
Web: www.kingslim.net
What’s in the Box
- D5 Dash Cam * 1
- GPS Bracket * 1
- Car Charger with 3.5m Power Cable * 1
- Cable Clips * 5
- Pry Tool * 1
- Double-sided Adhesive Tape * 2
- Quick Start Guide * 1
- Static Sticker * 2
Camera Overview
- Insert a memory card (sold separately). The D5 Dash Cam supports a Class 10 or above memory card of up to 256 GB (memory card not included).
- Please format the card in the camera before using it in the dash cam.
- Do not remove or insert the memory card when the dash cam is turned on as this may damage the card.
- Insert the GPS bracket into the bracket slot.
- Adjust the viewing angle of the dash cam accordingly.
- Connect the car charger to the dash cam. Plug the car charger into the cigarette lighter.
- Use the pry tool to hide the cables.
Formatting the Memory Card
Please format the memory in the camera before using this dash cam. Do not remove or insert the memory card when the dash cam is turned on as this may damage the card.
Setup
To format the memory card:
- Press the button to pause the recording.
- Press the button to enter the settings page.
- Press the button to select Format, then press the button.
- Select OK and press the Confirm button. Once formatting is complete, it will automatically exit this page.
Video Recording:
- After formatting is complete, connect a car charger and start the engine; the device will automatically turn on and begin recording.
- Loop recording is already enabled on the D5 Dash Cam; the default setting is 3 Minutes.
- The G-sensor is already enabled on the D5 Dash Cam; the default setting is Low. If an impact or sudden braking is detected, it will automatically start recording and save the footage in the frontier folder.
Viewing Album
- Press the 4th function button to stop recording.
- Press the 2nd function button to enter the album.
- Options: 1Video 2Emergency recording 3Parking mode recording 4Photo
- Tips: To unlock the emergency recording, please enter the album, short-press the power button, and then select your option in the Unlock menu.
What’s in the Box
Camera Overview
- Function Button
- Bracket Slot
- Front Camera
- Mini USB Power Port 1 (Power supply) Mini
- USB Power Port 2
- Memory Card Slot
- Reset
- Working Indicator
- Power Button
- Speaker
- Screen
Installation
-
Insert a memory card (sold separately).
- Tip: The D5 Dash Cam supports a Class 10 or above memory card of up to 256 GB (memory card not included). Please format the card in the camera before using it in the dash cam. Do not remove or insert the memory card when the dash cam is turned on as this may damage the card.
-
Insert the GPS bracket into the bracket slot.
-
Install the D5 Dash Cam on the windshield.
-
Clean the windshield with a dry cloth.
-
Remove the static sticker film and apply the sticker to the windshield while making sure there are no air bubbles.
-
Peel off the film on one side of the double-sided adhesive tape and apply the tape to the D5 Dash Cam.
-
Peel off the film on the other side of the adhesive tape and press the D5 Dash Cam firmly to secure it on the static sticker (if you wish to remove the dash cam, please take the static sticker).
Note: You can stick the dash cam to the windshield without using the static sticker. -
Adjust the viewing angle of the dash cam accordingly.
-
Connect the car charger to the dash cam. Plug the car charger into the cigarette lighter.
-
Use the pry tool to hide the cables.
Formatting the Memory Card
Please format the memory in the camera before using this dash cam.
Tip: Do not remove or insert the memory card when the dash cam is turned
on as this may damage the card.
- Press the button to pause the recording.
- Press the button to enter the settings page.
- Press the button to select Format, then press the button.
- Select “OK” and press the “Confirm” button.
Once formatting is complete, it will automatically exit this page.
Video Recording
- After formatting is complete, connect a car charger and start the engine; the device will automatically turn on and begin recording.
- Loop recording is already enabled on the D5 Dash Cam; the default setting is 3 Minutes.
- The G-sensor is already enabled on the D5 Dash Cam; the default setting is Low. If an impact or sudden braking is detected, it will automatically start recording and save the footage in the “frontier” folder.
Viewing Album
- Press the 4th function button to stop recording.
- Press the 2nd function button to enter the album.
Options:
- Video
- Emergency recording
- Parking mode recording
- Photo
Tips: To unlock the emergency recording, please enter the album, short- press the power button, and then select your option in the Unlock menu.
Icon Introduction
- Recording Resolution
- Recording Indicator
- Video Time
- GPS
- Microphone Indicator
- Parking Mode
- Power Status
- Memory Card Indicator
- Stop/Start Recording
- Time
- Setting/Emergency Recording
- Album/Photo
- Date
- Wifi Indicator/Audio Recording (Mute/Unmute)
Setup Menu
Language
- Select to switch language.
- Options: English
Resolution
- Select to switch resolution.
Options:
- 4K P30
- 2K P30
- 1080P P60
- Default setting: 4K P30
Loop Recording
- If you choose the 3 Minutes option, the files will be saved every 3 minutes.
- When the memory card is full, new files will overwrite the old ones if Loop Recording is on. If it is off, the camera will stop recording when the card is full. You will then need to format the memory card or insert a new one.
Options:
- 1 Minute
- 3 Minutes
- 5 Minutes
- Off
- Default setting: 3 Minutes
Beep Sound
- Turn the beep sound on/off.
- Default setting: On
Frequency
- Choose the right frequency to avoid flickering.
- This should be based on your local.
- AC parameters.
Options:
- 60 Hz
- 50 Hz
- Default setting: 60 Hz
G-Sensor
- When G-Sensor Mode is turned on, it will automatically start recording and save content if an impact or sudden braking is detected.
- The videos will be locked and never overwritten by new files.
- The higher the sensitivity level, the easier it is to trigger the G-Sensor.
Options:
- Off
- Low
- Middle
- High
- Default Setting: Low
EV
- Select to change exposure.
Options:
- +0.0
- -1/3
- -2/3
- -1.0
- -4/3
- -5/3
- -2.0
- Default setting: +0.0
Time Zone
- Choose the time zone manually. The device will then display the time of the selected time zone.
- Default setting: GMT – 5 (U.S. Eastern Time Zone)
GPS
- Track your driving speed and show your preferred speed unit.
Options:
- KM/H
- MPH
- Default setting: KM/H
Screen Saver
- The display screen will turn off automatically after a set time. When the screen is turned off, power consumption will be reduced. The camera will still work while the screen is turned off. Just click the screen to turn it back on.
Options:
- Off
- 30 Seconds
- 1 Minute
- 2 Minutes
- Default setting: 1 Minute
Codec
- Select your video compression standard. H.265 is faster and more efficient than H.264.
Options:
- H.265
- H.264
- Default setting: H.265
Car No.
- Enter your license plate number and videos/photos will include it in the left or right corner.
Date/Time
- Set the date and time manually.
Motion Detection
- When Motion Detection is on, the D5 Dash Cam will detect whether you are driving or parked. If no movement is detected after 5 minutes of recording, Parking Mode will be activated.
- Default setting: Off
Time-lapse Recording
- When Time-lapse Recording is selected, the camera will take static photos to create a video montage.
- Default setting: Off
Date Stamp
- Select to add a date stamp to photos/videos.
Default setting: On
HDR
- Select to turn HDR mode on/off.
- Default setting: Off
Parking Mode
- If there is an impact on the car during parking, the camera will turn on automatically and create a locked 20-second recording. The higher the selected level, the easier it is to trigger the recording.
- Default setting: Off
Format
- Format your memory card.
Default
- Restore the default settings.
Version
- Check the software version of the camera. This information may be required when technical support is needed.
Download the App and GPS Player
- Download the “Kingslim” app on the App Store or Google Play.
- Download the GPS player: www.kingslim.net/player
Using the “Kingslim” App
Connect the camera with the app.
- Short press the fourth function button to stop recording on the D5 Dash Cam.
- Short press the first function button to enter Wi-Fi settings on the main menu.
- Go to your smartphone’s Wi-Fi settings and connect to the Wi-Fi name shown on the dash cam. Enter the password and confirm the Wi-Fi network.
- Open the “Kingslim” app, tap “NVT_CARDVxxxx” and wait a few seconds to enter the preview interface.
- Tap the video or photo icon to control the D5 Dash Cam in either recording videos or shooting photos.
DOWNLOAD OR DELETE VIDEOS AND PHOTOS
- Tap the icon to stop recording.
- Tap the or icon to check the videos or photos.
- Tap “Select” and choose the videos or photos that you want.
- Tap the download or delete icon to download or delete.
Note:
- To exit WiFi settings, please press the first button on the dash cam.
- To delete the emergency recording on the app, please unlock the video in the album by pressing the power button to call out the Unlock menu.
Specifications
- Video: 4K at 30 fps/2K at 30 fps/1080P at 60 fps
- Video Coding: H.264/H.265
- Working temperature: 20–60°C (-4–140°F)
- Input: 5V DC
If your D5 Dash Cam is not working properly, please follow these troubleshooting steps:
- The dash cam cannot record.
- Check whether the memory card has enough space. Please back up any important data to other devices first, then format the memory card.
- Check if Loop Recording in the Settings menu is set to Off.
- Set “Loop Recording” to 3 minutes.
- The recording stops automatically.
- During recording, a large amount of high-definition video data is processed. Please use a high-speed memory card of Class 10 or higher.
- A “File Error” prompt appears when playing back pictures and videos. Please use a genuine memory card. Please format the memory card.
- The image is misty.
- Ensure that there are no fingerprints or other marks on the camera lens. Use a soft dry cloth to clean the lens. Clean the front windshield.
- The device crashes.
- If your device crashes, use a sharp object to press the reset button and restart the device.
- There is no sound in the video.
- Ensure that Audio Recording Mode is on.
- The camera keeps turning on and off automatically.
- Please charge the camera with the included car charger. Do not charge the battery via the USB data cable with other adapters.
Caution
- Please mount your device in a secure place and protect the lens from scratches and dirt.
- Do not expose the device to rain, moisture or water under any circumstances.
- Avoid leaving the device in direct sunlight for extended periods of time.
- Do not dismantle or expose the internal battery.
Contact Us
- For any inquiries about KingSlim products, please feel free to contact us. We will respond within 24 hours.
- Tel: 888-811-1140 (US) Email: cs@kingslim.net Web: www.kingslim.net .
Documents / Resources
|
KINGSLIM D5-4K Dash Cam with
WiFi
[pdf] User Manual
D5-4K Dash Cam with WiFi, D5-4K, Dash Cam with WiFi, Cam with WiFi, WiFi
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>