SERCOMM RP131CBRS-P Video PoE Adapter User Manual
- June 14, 2024
- Sercomm
Table of Contents
General
RP131CBRS-P Video Bridge Adapter is a LTE CPE running at CBRS band. It can be
configured as NAT mode to support set-top box, network TV or IP camera
applications. It also supports PSE function with max 10W so that the connected
PoE IP camera could be easily installed anywhere.
ID Outline
- LED x2 – RGB color LED, Dual color LED
- Ethernet LAN Port
- Wall Mount Plug – US pins
What you’ll need
- CBRS network available
- ARJ45 cable
- APoE IP camera or other PD device to connect to
- Awall socket to supply power
LED Behavior
| Solid Green | Device is on and booting up |
|---|---|
| Flashing Green | Device is registering to network |
| Solid Red | Device cannot connect to network |
| Flashing Red | Device is off and rebooting |
| Flashing Orange | Device is updating firmware |
Support
Thank you for purchasing this Sercomm product. tf for any reason things don’t
work right, or you need assistance, please contact us immediately. For
detailed information on product installation, usage, specifications, and
support, please visit: mosolabs.com/support
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a residential environment. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and the receiver
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance may void the user’s authority to operate his equipment. (i.e. — use only shielded interface cables when connecting to computer or peripheral devices) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation
IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance 20cm between the radiator & your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter. 