AIGOSTAR B30203LSY Doubel Wall Stainless Steel Electrc Kettle Instruction Manual

: June 14, 2024
: aigostar

Table of Contents

IMPORTANT SAFEGUARDS
PRODUCT OVERVIEW
TECHNICAL SPECIFICATION
OPERATION INSTRUCTIONS
MAINTENANCE AND DESCALING
WARRANTY: 1 YEAR
Read User Manual Online (PDF format)
Download This Manual (PDF format)

INSTRUCTION MANUAL
ELECTRIC KETTLE

MODEL: B30203LSY
PLEASE READ THIS INSTRUCTION MANUAL CAREFULLY BEFORE OPERATING YOUR PRODUCT AND RETAIN IT FOR FUTURE USE.

IMPORTANT SAFEGUARDS

Before commissioning this kettle, please read the instruction manual carefully.

Read all instructions.
Do not touch hot surfaces. Use handles or knobs.
To protect against fire, electric shock and injury to persons, do not immerse cord, plugs, or (state specific part or parts in question) in water or other liquid.
Close supervision is necessary when any appliance is used by or near children.
Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or adjustment.
The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock or injury to persons.
Do not use outdoors (this item may be omitted if the product is specifically designed for outdoor use).
Do not let cord hang over edge of table or counter, or touch hot surfaces.
Do not place on or near a hot gas or electric burner, or in a heated oven.
Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to “off,” then remove plug from wall outlet.
Do not use appliance for other than intended use.
Save these Instructions.

PRODUCT OVERVIEW

TECHNICAL SPECIFICATION

Model No.	B30203LSY
Power Supply	110-120V ~ 50/60Hz,
Power Consumption	1250-1 soow
Capacity	1.7L

OPERATION INSTRUCTIONS

Before first use, fill the kettle with clean water up to its maximum capacity and boil it. Then discard the water and start using the kettle.
Before filling or adding water, make sure the power plug is in the unplugged state.
Fill the kettle with water up to your desired level, but do not overfill it to avoid the risk of overflow or splashing. The water level markings on the kettle will help you measure the required amount of water. You can pour water through the spout or the open lid, but remember to close the lid properly after filling.
Otherwise, the kettle will not automatically turn off after boiling.
Do not fill the kettle below the minimum water level to avoid dry boiling during use.
Do not exceed the maximum water level when filling the kettle.
For safety purposes, this product is equipped with an automatic shut-off feature for dry boiling. If the kettle reaches a dry boiling state, this feature will automatically cut off the power supply. If this happens, turn off the switch, unplug the power plug, allow the kettle to cool for 5 to 10 minutes, then refill it with water and resume normal usage.
Insert the plug into the power outlet, and the power will automatically be connected to the power switch. Press the switch button to position “1”, and the kettle will start working.
The switch will automatically turn off when the water has boiled.
Remember, if you do not want to boil water again, turn off the power.
You can manually turn off the kettle at any time by pushing the switch to position “0”.

MAINTENANCE AND DESCALING

Before cleaning, ensure that the power plug is removed from the socket and that the kettle has cooled down completely.
To prolong the service life of the electric kettle, any scaling should be removed regularly.
Due to different water quality levels in different countries, hard water may generate scaling under long-term heating conditions. Although this is harmless to human health, it affects the heating efficiency and the kettle’ s appearance, and therefore it is necessary to remove the scaling regularly. This can be done by mixing ordinary vinegar and water at a ratio of 1 :2, boiling the mixture and placing it in the kettle overnight. Discard the mixture the next day, then boil clean water in the kettle and discard the water again. If there is still scaling in the product, repeat the above steps. Do not clean this product with steel wool or any chemical or powder cleaner.
After use, empty the kettle and store it in a cool, dark place.