ezcoo EZ-SW21H21 HDMI Dual Montor Kvm Switch User Manual

: June 14, 2024
: ezcoo

Table of Contents

User Manual
- HDMI2.1 DUAL MONITOR KVM SWITCH 2×1
Read User Manual Online (PDF format)
Download This Manual (PDF format)

User Manual

HDMI2.1 DUAL MONITOR KVM SWITCH 2×1

8K@60Hz 8bit RGB4:4:4
4K@120Hz 8bit RGB4:4:4
HDR & Dolby vision
USB3.0
EZ-SW21 H21-KVMU3PDM

Make Installation Easy

OVERVIEW

2-Port HDMI2.1 Dual monitor KVM Switch

The 2- Port HDMI2.1 KVM switch Control 2 computers or laptops with one set of wired or wireless keyboard, mouse and 2 extended or mirrored monitors at the same time. switching anytime via remote control, buttons on unit or keyboard hot key. This HDMI2.1 KVM Switch supports video formats including 720p,1080i ,1080p, 4K/120Hz, 8K/60Hz RGB4:4:4,8bit.And All system of Windows, Unix and Mac OS x. Compatible with the BASIC wired/wireless keyboard/ mouse.

FEATURES

Support HDMI2.1
Supports highest video resolution 4K/120Hz 8bit, RGB4:4:4 and 8K/60Hz 8bit, RGB4:4:4
Support HDR & Dolby vision
Support DTS HD, Dolby true HD, Dolby Atmos
Support 3D
Support 24/30/36 bit deep color
Supports USB3.0
Supports control by remote, buttons on unit or keyboard (Hot key switch supported)

PRODUCT DIAGRAM

Package Accessories:

HDMI KVM switch x1
IR remote control x1
User manual x1
IR extender cable X1
USB3.0 type A to type A cable x2
Micro-USB to type A cable x1

INSTALLATION

ezcoo EZ-SW21H21 HDMI Dual Montor Kvm Switch A1

Projector
U Disk
Printer
Camera
Barcode scanner
keyboard
mouse
Micro USB cable
PC1
PC2
Dual display
Monitor 1
Monitor 2
IR

SPECIFICATIONS

HDMI version	HDMI 2.1
HDMI resolution	Up to 8K/60Hz RGB4:4:4 8 bit
Support video format	3D
Support video color format	24/30/36 bit deep color
Support audio format	Dolby-Atmos/Dolby-trueHD/DTS/ DTS-HD/DSD
USB version	USB 3.0
Max working current	1000mA
Operating Temperature range	(-10 to +55°C)
Dimension (L x W x H)	130x65x28 (mm)
Weight	160g

OPERATINT AND CONNECTING

Connect PC HDMI output into HDMI KVM switch input with 4 HDMI2.1 cables
Connect 2 monitor HDMI input into HDMI KVM switch output with 2 HDMI2.1 cable
Connect PC USB3.0 port into HDMI KVM switch host pods with USB3.0 type A to type A cable
Connect keyboard & mouse into HDMI KVM switch USB1& USB2 pods
Switching anytime via remote control, buttons on unit or keyboard hot key.

KEYBOARD SWITCH

1. press button”*”, at the same time press 1~2 number, then release the button at the same time

+ SELECT INPUT1
+ SELECT INPUT2

2. click ‘Ctrl’ twice, click No. 1~2 the one you select Ctrl+Ctrl + number(1~2) switch to 1~2 port you select.

3. Hot key switch enable and disable
Enable Hot key switch function when you set Hot key switch to ‘ON’ position.
Disable Hot key switch function when you set Hot key switch to ‘OFF’ position.
(Disable Hot key switch function when you meet the issue of keyboard)

4. Note : Please press ‘Ctrl+Ctrl+ESC’ to reset, when you have hotkey issue.

USING TIPS

Re-powering and unplugging the HDMI cable is a common troubleshooting method.
When you install this KVM switch for the first time, please keep the computer connected to the Internet.
After connecting the USB cable and power on, wait about a minute, KVM will automatically download and install the driver.
Please use qualified or brand-new HDMI 2.1 standard cable less than 3 meter.
Hold the select button 5 seconds till input LED blink 3 times as RESET, to solve picture flash/black issue.
It can work without power supply, If you connect high-current USB devices such as hard disks, cameras, etc., please find a 5V2A Mirco USB cable for power supply, such as an Android phone charger(Mirco USB cable not included)

NOTES

Please use this machine based on below instructions to keep longer lifetime.

The machine should be placed at the spot far away from the Damp, High-Temperature, Dusty, Erosive, and Oxidant environment.
All parts will be free from the strong shake, hit, fall.
Touching the device with the wet hands is prohibited.
Please turn power off when machine is not used for long time.
Please do not open the cover and do not touch the inside parts.
Please use the original factory power adaptor.
Before power on, please check the connection cable carefully. And make sure that all interfaces are normally connected.

DISCLAIMERS

The information in this manual has been carefully checked and is believed to be accurate. EZCOO TECHNOLOGY INC. assumes no responsibility for any infringement of patents or other rights of third parties which may result from its use. EZCOO TECHNOLOGY INC. assumes no responsibility for any inaccuracies that may be contained in this document. EZCOO TECHNOLOGY INC. also makes no commitment to update or to keep current the information contained in this document. EZCOO TECHNOLOGY INC. reserves the right to make improvements to this document and/or product at any time and without notice.