ezcoo EZ-SW24L-U3L USB 3.0 KVM Switch User Manual
- June 14, 2024
- ezcoo
Table of Contents
ezcoo EZ-SW24L-U3L USB 3.0 KVM Switch
OVERVIEW
This 4 Port USB 3.0 Switcher allows one button toggle between 2 computers to share 4 USB 3.0 peripheral devices without constantly pull cables or set up complicated network sharing software. Ldeal for sharing devices such as printer, scanner, mouse, keyboard, card reader.flash drive and other USB devices between 2 computers.lR Romte and 2 Pack USB type A to type A Cable.And operating all of system like Windows.like Windows, Unix and Mac OS x.Compatibile with the BASIC wired/wireless keyboard/mouse.
FEATURES
- Support USB3.0 up to 5Gbps
- 2 USB3.0 HOST for computers,4 USB3.0 ports for Devices
- Supports control by remote, buttons on unit
- Do not need power adapter
PRODUCT DIAGRAM AND ACCESSORIES
PRODUCT DIAGRAM
Package Accessories
- USB3.0 Switch x1
- IR Remote Control x1
- User manual x1
- Velcro Cable Ties X2
- IR Extension Receiver X1
INSTALLATION
SPECIFICATIONS
- USB Vertion: USB3.0
- Transmission rate: 5Gbps
- Max working current: 2A
- Dimension(LxWxH): 126.9166.820 {mm)
- Weight: 270g
- Power adapter format: Input: AC 1 00V-240V/ 50HZ,60HZ;
- Output: USB 5V/2A
- Operating Humidity range: 5 to 90%RH{No Condensation)
- Operating Temperature range: (-15 to +55°C)
OPERATING AND CONNECTING
- Connect PC into USB3.0 switch host ports with USB3.0 type A to type A cable
- Connect keybord & mouse into USB3.0 switch USB1 & USB2 ports
- If use hard disk please connect USB power adapter or PC USB PORT into switch micro USB port with micro cable for more power support.
- switching anytime via remote control, buttons.
USING TIPS
- Re-powering and unplugging the USB cable is a common troubleshooting method.
- Please use qualified or brand-new USB3.0 cable, make sure the cable is good.
- When connecting for the first time, please make sure that the computer is connected to the Internet, wait for 30 seconds, the device will automatically install the driver.
- It can work without power supply, If you connect high-current USB devices such as hard disks, cameras, etc., please find a 5V2A Mirco USB cable for power supply, such as an Android phone charger(Mirco USB cable not included)
- Press and hold the select button for 5 seconds to reset.
NOTES
Please use this machine based on below instructions to keep longer lifetime.
- The machine should be placed at the spot far away from the Damp, High-Temperature, Dusty, Erosive, and Oxidant environment.
- All parts will be free from the strong shake, hit, fall.
- Touching the device with the wet hands is prohibited.
- Please tum power off when machine is not used for long time.
- Please do not open the cover and do not touch the inside parts.
- Please use the original factory power adaptor.
- Before power on, please check the connection cable carefully. And make sure that all interfaces are normally connected.
DISCLAIMERS
The information in this manual has been carefully checked and is believed to be accurate. EZCOO TECHNOLOGY INC. assumes no responsibility for any infringement of patents or other rights of third parties which may result from its use. EZCOO TECHNOLOGY INC. assumes no responsibility for any inaccuracies that may be contained in this document. EZCOO TECHNOLOGY INC. also makes no commitment to update or to keep current the information contained in this document. EZCOO TECHNOLOGY INC. reserves the right to make improvements to this document and/or product at any time and without notice.
CONTACTS
- When you need any technical assistance, please send e-mail to support@easycoolav.com
- Visit to learn more: https://www.easycoolav.com
EZCOO TECHNOLOGY INC
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>