Shantoushi Rongkaidianzi Youxian Gongsi TG117 Speaker User Manual
- June 6, 2024
- Shantoushi Rongkaidianzi Youxian Gongsi
Table of Contents
Shantoushi Rongkaidianzi Youxian Gongsi TG117 Speaker
PRODUCT SPECIFICATIONS
Support: L2CAP/A2DP(AVCTP/AVDTP/ AVRCP), can receive an AUDIO signal and control the AUDIO device.
- Working distance:1 OM
- SNR:90db
- Battery: 3. 7V 1200mah
- Normal volume playing time:3H-4H
- Speaker driver: ¢45mm*2
- Frequency response: 120HZ-20KHZ
- Unit size:68.868.8160mm
- Carton meas:50PCS/CTN
- Unit weight: about 419g
- Charging: 5V /500MA
PRODUCT FEATURE:
- international advanced BT chip and circuit design techniques, support all wireless devices.
- With FM function, can search radio station broadcast automatically
- With Hi-Fi speaker, to make sure the clear and bright sound.
- Support Micro SD card and USB card, play MP3 format audio.
- The wireless working distance is 10 meters.
- With AUX line-in, can directly connect the outside devices, for example, tablet PC/TV/ cell phones.
- .Under the BT disconnection mode, the device will be auto power-off within a half-hour.
KEY AND SLOT FUNCTION:
- DC 5V slot: Use the standard Micro USB VB charging cable for power charging.
- TF slot: It can decode and play MP3 format audio when put TF card into the slot.
- USB slot: It can decode and play MP3 format audio when put the USB card into the slot.
- AUX line-in slot: Use the Mini 3.5 head input through outside devices.
- When playing music, Press short for the last song, long press to turn down the volume. Q
- When playing music, press short for next song, long press to turn up the volume.
- When playing music,(USB card/TF card/BT/line-in), short press to switch model.
- Power switch: Press long for power on /power off. In FM mode, press short to search station automatically, press again to stop searching. Under BT mode with mobile paired, when a call comes, press short to answer a call hands-free, press again to hand up,press twice to ring up a call.
NOTE: In the FM mode, put in a micro charging cable to get a better FM radio station.
Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Information to the user.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>