BOWER WA-SNAPL Clip On Snap Light User Manual

: June 15, 2024
: BOWER

Table of Contents

BOWER WA-SNAPL Clip On Snap Light
IN THE BOX:
HOW TO USE
Specification
LIMITED One (1) Year Limited Warranty
Documents / Resources

BOWER WA-SNAPL Clip On Snap Light

IN THE BOX:

PRODUCT PARTS: BOWER WA-SNAPL Clip On Snap Light 2

LED Light Panel
Clip-on Mount
Power/Mode Button
Brightness Up Button
Brightness Down Button
Micro-usb Charging Port
USB-C Charging Port
Battery Level Indicator
Phone Mount Attachment Grooves
Clip-on Mount Release Button
Camera Hole

HOW TO USE

Turn on/off light:
Press and hold the Power/Mode Button(long press) for about 3 seconds and the light will turn on. To turn off the light press and hold the Power/Mode Button (long press) again for about 3 seconds and the light will turn off.

Switching Light Modes:
Press the Power/Mode Button(short press) repeatedly to cycle through the 3 White Light Modes(warm, natural, and white).

Adjusting Brightness:
Simply press Brightness Up Button or Brightness Down Button to find the desired brightness. The light-panel has up to 8 levels of adjustable brightness.

Charging the Device:
Simply connect the provided USB-C cable to any USB port (computer, powerbank, USB wall charger) to begin charging. The moving Blue light on the Battery Level Indicator indicates charging is in progress. Once the Blue light is no longer moving charging is complete.

Using the Phone Mount:
Remove the Clip-on Mount from the light panel by pressing the Clip-on Mount Release Button. Attach the Phone Mount to the back of the light panel by aligning the 3 hooks to the 3 grooves on back of the light panel, and press in until your hear a click. Extend top part of the Phone Mount and insert your phone. Phone Mount opens up to 3.1″ to fit most phones. BOWER WA-SNAPL Clip
On Snap Light 3

Clips on to monitors, phones, tablets:

Specification

Lamp Beads White Light 30 + Warm Light 30 pieces (60 total)
Color temperature: 3000-6500K
Lumen: 240lm
Color rendering index: 80Ra
Battery: 2000 mAh
Built-in: 4.2V1A
For side charging: 5V1.1A
Input charge: 5V1A
Power: 4W
Endurance warm/white light: 3 hrs(max brightness)
Charging time: 2.5-3 hrs
Size: width: 3″, height: 6.5″, depth: 1.3″
Gross weight of product: 0.18kg

LIMITED One (1) Year Limited Warranty

S. Bower Inc.™ One (1) Year Limited Warranty: This warranty gives you specific legal rights and you may have other rights which vary from state to state. The S. Bower Inc.™ Limited Warranty is a voluntary manufacturer’s warranty provided to the consumer. This warranty provides rights separate to rights provided by consumer law, including but not limited to those relating to non- conforming goods. S. Bower Inc.™ One-Year Limited Warranty benefits are in addition to, and not instead of, rights provided by consumer law and it does not exclude, limit or suspend a buyer’s rights arising from consumer law. Consumers have the right to choose whether to claim service under the S. Bower Inc.™ One-Year Limited Warranty or under their consumer law rights. The S. Bower Inc.™ One-Year Limited Warranty terms and conditions shall not apply to consumer law claims, contact your local consumer organization.

Please note: All claims made under the S. Bower Inc.™ One-Year Limited Warranty will be governed by the terms set out in this warranty document. S. Bower Inc.™ warrants to the product owner that this product will be free against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original retail purchase when used in accordance with S. Bower Inc.™ ’s user manual. Under this warranty, you will be able to send your claims and defective product to S. Bower Inc.™, via freight prepaid, along with proof of purchase, and will be repaired or replaced, based on S. Bower Inc.™ sole discretion. Repair and/or replacement may be made with new or refurbished product components at S. Bower Inc.™ sole discretion.

This limited warranty does not cover failures due to abuse, accidental damage or when repairs have been made or attempted by anyone other than S. Bower Inc.™ personnel. A defective product meeting the warranty conditions set forth herein will be replaced or repaired at no charge in either of two ways: The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided that the store is a participating retailer). Returns should be made within the time period of the retailer’s policy for exchanges. Proof of purchase may be required. Please check with the retailer for its specific return policy regarding time limits for returns or exchanges. The second option is to send the product (prepaid freight) to S. Bower Inc.™ corporate offices located at S. Bower Inc. 38-09 43rd Avenue 1st Floor Long Island City, NY 11101 for repair or replacement at S. Bower Inc.™ ’s option. Proof of purchase is required. Include name, return address, and issues that you are experiencing with S. Bower Inc.™ products. All other guarantees, express or implied, are hereby disclaimed. This warranty does not apply to products sold in countries sold out of the United States.

©202 3 S. Bower, Inc . Al l righ t s reserved.
All brand names and trademarks belong to their respective owners
S. Bower, Inc. LIC, NY 11101 www.BowerUSA.com

Documents / Resources

| BOWER WA-SNAPL Clip On Snap Light [pdf] User Manual
WA-SNAPL Clip On Snap Light, WA-SNAPL, Clip On Snap Light, On Snap Light, Snap Light, Light
---|---