ALPEN WILDORN 32 Electric Secateurs User Guide

ALPEN WILDORN 32 Electric Secateurs

DECLARATION OF CONFORMITY

We declare that the designated machine complies with the provisions of Directive 2006/42/EECb

1. Manufacturer and address:
   Alpen Swiss Tools
   CH-2206 Les Geneveys-Sur-Coffrane
   +41 32 545 23 23
   P.O. Box
   1352 / DE-71688 Freiberg
   +49 7141 685 75 75 / +49 7141 685 75 85

2. Identification: WILDORN

3. Function: Battery-powered pruning sheas

4. Model: WILDORN 32

5. Compliance with the provisions of European standards
   For EMC CB scheme: EN IEC 55014-1:2021, EN IEC 55014-2:2021 For CB Safety: EN IEC 62841-1:2014

6. Date and place of issue 03.24.2023, CH-2206 Les Geneveys-Sur-Coffrane

7. Author of the declaration and signature Nabil Francis CEO, Rue des Mélèzes 4, CH-2206 Les Geneveys-Sur-Coffrane

Dear Alpen client,

Thank you for choosing Alpen, a proudly Swiss brand.

We design and manufacture our high-quality products to meet the demands of our clients while honoring our Swiss heritage of excellence and craftsmanship. Our products are engineered to reliably deliver performance, even in the most challenging conditions.

Alpen not only represents top-notch service and quality, but also embodies the values of Nature’s Artisans, the spirit of the mountains, and respect for nature characteristics deeply rooted in Swiss culture. Our retailers provide expert advice, detailed instructions, and comprehensive support services.
At Alpen, we are deeply committed to sustainable and responsible business management. This user manual will assist you in the safe and appropriate use of your Alpen product, to maximize its lifespan in your working environment.
We appreciate your trust in our brand and hope you enjoy using your Alpen product.
Sincerely,

CONTENT OF THE KIT

• 1x User guide including declaration of conformity
• 1x ALPEN WILDHORN 32 electric pruning shears
• 3x batteries 14.4V, 2.6Ah
• 1x Sharpener
• 1x Lubricating pump + grease tube
• 1x Holster, batteries pouch and belt
• 1x 3 way charger
• 1x Allen key
• 1x 13 mm wrench
• 1x Phillips screw driver

DESCRIPTION OF THE PRODUCT

1. Blade
2. Anvil blade
3. LCD screen
4. ON/OFF button
5. Battery
6. Trigger
7. Greasing bolt
   

WARNING Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury

READ CAREFULLY

It is essential to read and save all safety, maintenance and other instructions provided in this User Guide. Please follow the instructions and illustrations provided in this document. You will come across warnings and information with the following titles throughout this manual: NOTE, WARNING or CAUTION. NOTE provides additional information, clarifies a point or explains a step to be followed in detail. WARNING or CAUTION identify a procedure which, if neglected or performed improperly, can result in serious injury and/or damage. GUARANTEE indicates that if the procedures or instructions are not followed, any damage would not be covered by the guarantee and the owner would have to bear the costs of repair.

No part of this operating manual may be reproduced without written permission from ALPEN. The specifications and illustrations provided in this user guide are provided for guidance and are not contractually binding in any event. ALPEN reserves the right to modify or improve its products as it finds fit without notifying customers who already own a similar model. This user guide forms integral part of the tool and is to be handed over to any new owner.
DO NOT ATTEMPT TO OPEN ANY PART OF THE PRUNING SHEARS WILDHORN 32 (risk of damage; more importantly, that would void the guarantee). Any work whatsoever during the guarantee period may only be carried out by ALPEN or a dealer authorized by ALPEN.

Carefully keep the details of your equipment (SEE labels on the various components) to facilitate communication with our after- sales service and prevent errors in the sending of spare parts.

For more information about the guarantee supplied with ALPEN tools, please go to our website: https://alpenswisstools.com/

Before first use: READ THIS USER GUIDE CAREFULLY.

Warning

|
---|---
Read the manual|
Do not use in the rain|
May cut or hurt|
Follow recycling instructions|
LI-ION battery|
Do not burn|
Do not immerse|

ENVIRONMENTAL PROTECTION

Your equipment contains a number of materials that can be repurposed or recycled. Hand it over to your reseller or an authorized dealer for recycling/disposal.

SAFETY MEASURES

Your ALPEN WILDHORN 32 electric pruning shear is a professional tool to be used exclusively for pruning trees, bushes, shrubs and vines.

It will make pruning much easier for arboriculture and the maintenance of parks, gardens, forests and vines. ALPEN disclaims all liability in the event of damage due to improper use other than that for which the equipment is designed.

ALPEN further disclaims liability for damages due to the use of non-original parts or accessories.

ALPEN further disclaims any problem due to the use of a power tool while you are tired or under the influence of drugs, alcohol or medication.

Use personal protective equipment. The use of protective equipment such as gloves, eye wear and ear protection is highly recommended and will help reduce the risk of injury.

The WILDHORN 32 shears may not be used by people wearing pacemakers without the permission of a physician.

SAFETY MEASURES RELATED TO THE USE OF THE TOOL

Check that the tool is turned OFF before you start any work on the tool (replacement of the blade (1),…). Do not dismantle the pruning shears WILDHORN 32. Only the operations contained in this user guide are permitted.

Do not store the pruning shears WILDHORN 32 in a humid or hot environment.

Don’t try to cut if the cross-section is too big or materials other than wood, unless specifically stated. Keep the original packaging for storing the pruning shears WILDHORN 32, in case you need to send them back for servicing or repair.

Keep the tool out of the reach of children.

When the pruning shears WILDHORN 32 are not in use, close the blade (1) and always turn OFF the tool in order to avoid injury and deep discharge of the battery (5).

Never use the tool if it is damaged, incorrectly adjusted or incompletely assembled.

Keep a minimum safety distance of 20 cm between the free hand and the tool.

Mind any material that could be emitted while pruning as this may lead to potential injury or damage to property. The user and bystanders must wear protective eye wear.

Always wear appropriate shoes and clothing.

Do not use in rain or water.

Use the pruning shears with caution.

Pruning shears in accordance with CE.

The equipment must be used in a temperature range between -10 °C (+14 °F) and +60 °C (+140 °F).

BATTERY

IMPORTANT INFORMATION, TO READ BEFORE USE

WARNING
Contains dangerous materials (lithium batteries under regulation UN 3480 or UN 3481, Class 9) and is therefore subject to rules and restrictions regarding transportation, storage, and recycling conditions. ALPEN shall not be liable in the event of noncompliance with these instructions.

HANDLING AND CHARGING

Do not use the battery if an evident visual defect can be noticed.

When recharging, use only the compatible battery charger sold with the original ALPEN equipment. Do not leave the battery unattended while charging. The battery must be charged in a dry ventilated room where the temperature does not exceed the specified values (4°C / 39°F and +45°C / 113°F).

Battery must be fully charged before storing it, after the pruning season.

Outside of the pruning season, charge the battery every three months, to avoid deep discharge.

Do not use batteries if you detect swelling and/or unusual heat, smell, or discoloration of contacts, and dispose the batteries at a local battery recycling center.
Do not immerse in water or expose to high humidity rates.

Do not use or place near a source of heat or in strong sunlight.

Do not expose to microwaves or high pressure. Keep out of the reach of children. Always keep batteries away from flammable materials!

INDICATION FOR USE AND STORAGE

CAUTION
When you first put your pruning shears WILDHORN 32 into service, please fully charge your batteries (5) before to use your pruning shears.

Before to store it at the end of the season, please be sure to fully charge batteries. We recommend to charge the battery every 3 month when you store i for a longue period.

TECHNICAL SPECIFICATIONS

PRUNING SHEARS

of wood, from 1 to 32mm
Weight of pruning shears| 940g

BATTERY PACK SPECIFICATIONS
14.4V 2600MAH 37.44WH

Charging temperature
range| 4-45°C

The tool must be used only with ALPEN battery TR-4S1P and ALPEN charger WEC- 26WEAP-16800150AA. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded).

USE

TURN ON AND TURN OFF THE TOOL
Insert the battery (5) into the pruning shears housing.
Once the battery has been fitted, press and hold button (4) for about one second. A long acoustic signal will be heard.
Press the trigger (6) quickly twice in succession. A triple acoustic signal will be heard and the blade will open.
At this point the machine is ready to be used. To switch your pruning shears WILDHORN 32 off, close the blade (1) by pressing the trigger (6) for about four seconds until you hear the second double signal (holster mode), then release the trigger and press the switch (4) for 1 second. You can also switch the pruning shears off temporarily using the Holster mode (please refer to the “Holster mode” paragraph).

SEMI-OPEN MODE
The user can set the blade to the semi-open mode at any time. That can be useful while cutting branches of small diameters

To enable the semi-open mode, keep the trigger pressed for 2 seconds until a double acoustic signal is heard. Release the trigger to continue working. To go back to the full opening mode, please follow the same procedure.

PROGRESSIVE MODE
The pruning shears can be used in progressive mode or in non-progressive mode. To switch from one mode to the other, turn-off the tool, then hold the trigger (6) and press the ON/OFF button (4) for 4 seconds until a long acoustic signal is heard.

• Non-progressive mode : the blade will automatically close fully once the trigger is pressed
• Progressive mode : the blade will move accordingly to the position of the trigger

HOLSTER MODE
The holster mode of the pruning shears enables you to keep the blade closed without using the switch (4) To enable that mode, press the trigger (6) and keep it pressed for 4 seconds : a double acoustic signal will be heard to indicate that the shears are in stand-by mode. To resume work, press the trigger twice quickly; the blade will move to open position (as before closing) and it will be possible to perform a new cutting cycle. The pruning shears will automatically switch to holster mode after 3 minutes without pressing the trigger. After 10 minutes of inactivity, the tool will totally be turned off.

CAUTION
This does not amount to switching off the tool, but just helps you to store the tool in its holster. Be careful and pay attention, because a movement (double click) of the trigger (6) will open the blade (1).

LCD SCREEN
When the pruning shears is turned on, the LCD screen (3) briefly displays the number of cuts made since the tool has been built in our factory. After one second, the screen display the number of cuts made since the last time the pruning shears was turned on. You can also see the battery level, in percentage. This number can fluctuate during the use and will stabilize after few seconds of inactivity.

SHARPENING
This operation is crucial, as it determines the cut quality and the life of the blade (1), mechanical parts and the life of the battery (5). Sharpening frequency depends on the wood to cut (hardness and diameter), the cutting speed and the quality of the sharpening tool (ALPEN sharpener recommended). That is why, in the early days of use, it is important to regularly check the sharpness of the blade (1) and to sharpen it whenever necessary (checking every hour will soon give you an idea of that frequency). With intensive pruning, daily sharpening is recommended throughout the cutting season. Always sharpen the blade (1) when the WILDHORN 32 is turned OFF.

CAUTION
The blade must be sharpened for the first time after the first half hour of use. For the sharpening procedure, please refer to the procedure you can find on our official website (QR code at the beginning of this user manual).

MISCELLANEOUS MAINTENANCE
Clean the cutting head regularly with a cleaner and lubricant that offers protection from corrosion. In particular, remove any build-up of sap on the blade (1) and counter blade (2).

Regularly clean the tool body with a moist cloth. Grease daily the grease tank of the counter blade (2) by applying ALPEN grease using the specific pump, on the grease bolt head (7).
Do not leave pruning shears WILDHORN 32 on the ground or exposed to the weather.

OUTSIDE THE PRUNING PERIOD
Store the pruning shears WILDHORN 32 in its case, away from heat, dust and humidity.

MALFUNCTIONING
If the pruning shears is not properly working, please consult our website www.alpen.tools.

EQUIPMENT

The specifications are provided for guidance only and are not contractually binding in any event.
ALPEN reserves the right to make any design and manufacturing changes deemed necessary in order to enhance perfection.

WARRANTY

For any additional information regarding the guarantee of the tools, please visit our website www.alpen.tools.

Text translated from its original version in English. In the event of conflicts of interpretation between the original and translated versions, the original version shall be the authentic text.

GENERAL POWER TOOL SAFETY WARNINGS

WARNING Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery- operated (cordless) power tool.

1. WORK AREA SAFETY
   a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
   b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
   c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2. ELECTRICAL SAFETY
   a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
   b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
   c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
   d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
   e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
   f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

3. PERSONAL SAFETY
   a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
   b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
   c) Prevent unintentional starting. Ensure the switch is in the off- position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
   d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
   e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
   f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
   g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
   h) Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.

4. POWER TOOL USE AND CARE
   a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
   b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
   c) Disconnect the plug from the power source and/ or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
   d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
   e) Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
   f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
   g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. h) Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

5. BATTERY TOOL USE AND CARE
   a) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
   b) Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
   c) When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
   d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
   e) Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
   f) Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130 °C may cause explosion.
   g) Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.

6. SERVICE
   a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
   b) Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.

SPECIAL SAFETY ADVICE FOR THE PRODUCT

Recharge the Battery only with the provided charger. Before starting any work on walls, floors or similar, make sure that all power lines in the work area are switched off at the main switchboard.

Customer Support

visit our website
www.alpen.tools

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>