ezcoo EZ-SW41HA-KVM HDMI V2.0 KVM Switch 4×1 User Manual

USER MANUAL
HDMI V2.0 KVM SWITCH 4×1 4K@60Hz 8bit YUV4:4:4
HDR & Audio breakout USB2.0
EZ-SW41HA-KVM
Enjoy the vivid world!

INTRODUCTION

4-Port HDMI2.0 KVM Switch
The 4 Port HDMI2.0 KVM switch allows 4 HDMI ports to be switched to a single display terminal. At the same time, this kit helps you control 4 signal
sources easily by only one set USB keyboard & mouse console, switching anytime via remote control, buttons on the unit or keyboard & mouse. This HDMI2.0 KVM Switch supports video formats including 720p, 1080i , 1080p, 4K/30Hz，4K/60Hz YUV4:4:4, 8bit. And All systems of Windows, Unix, and Mac OS X. Compatibles with the BASIC wired/wireless keyboard/mouse.

FEATURES

• Support HDMI2.0
• Supports highest video resolution 4K/60Hz 8bit, YUV4:4:4
• Support 18Gbps data rate for TMDS clock up to 600MHz per channel.
• Support HDR
• Support 3D
• Support 24/30/36 bit deep color
• Support SPDIF and 3.5mm stereo audio breakout up to Digital 5.1CH.
• Support AWG26 HDMI standard cable, input up to 8metres, output up to 8metres (4K/30Hz resolution and below)
• Support 2.0 HDMI standard cable, input up to 3 meters, output up to 5 meters (4K/60Hz resolution)
• Supports USB2.0, keyboard and mouse, USB disk, camera
• Supports control by remote, buttons on the unit or keyboard & mouse (Hotkey switch supported)
• 5V/3A power adapter.

Product Photos

SPECIFICATIONS

HDMI standard cable in 4K/60Hz
Output cable distance| .≤8m AWG26 HDMI standard cable in 4K/30Hz; ≤5m 2.0 HDMI standard cable in 4K/60Hz
Max working current| 350mA
Operating Temperature range| (-10 to +55℃)
Power adapter specification| C (50HZ, 60HZ)
Dimension (L x W x H)| 137x84x35 (mm)
Weight| 140g

Interface diagram:

Operating and Connecting

1. Connect HD signal sources into HDMI KVM switch input with 4 HDMI cables
2.  Connect 1 HDMI display source into HDMI switch output with 1 HDMI cable
3. Connect sources device into HDMI KVM switch host ports with USB type to type cable
4. Connect keyboard & mouse into HDMI KVM switch USB1&USB2 ports
5. Connect the switcher with 5V/3A power adapter.
6. switching anytime via remote control, buttons on the unit or keyboard & mouse.

1)Keyboard switch (hot key switch)

| Select INPUT 1
---|---
| Select INPUT 2
| Select INPUT 3
| switch to the previous post
| switch to next port

2)Mouse switch

3. Fast switch

Mouse gesture fast switch(* + s open this function): move the mouse pointer to left/right/up/down the edge of the screen to switch between 4 computers.

USB HOST1
PC1| USB HOST2 PC2
---|---
USB HOST3 PC3|   USB HOST4 PC4

Package Accessories

1. HDMI switcher
2. IR remote control
3. 5V power adapter
4. User manual
5. Cable tie

Notes
Please use this machine based on the below instructions to keep a longer lifetime.

1. The machine should be placed at the spot far away from the Damp, HighTemperature, Dusty, Erosive, and Oxidant environment.
2. All parts will be free from the strong shake, hit, fall.
3. Touching the device with wet hands is prohibited.
4. Please turn the power off when the machine is not used for a long time.
5. Please do not open the cover and do not touch the inside parts.
6. Please use the original factory power adaptor.
7. Before power on, please check the connection cable carefully. And make sure that all interfaces are normally connected.

DISCLAIMERS

The information in this manual has been carefully checked and is believed to be accurate. EZCOO TECHNOLOGY INC. assumes no responsibility for any infringement of patents or other rights of third parties which may result from its use.
EZCOO TECHNOLOGY INC. assumes no responsibility for any inaccuracies that may be contained in this document. ESCORT TECHNOLOGY INC.
also makes no commitment to update or to keep current the information contained in this document. EZCOO TECHNOLOGY INC. reserves the right to make improvements to this document and/or product at any time and without notice.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>