Waterdrop WD-C14 Water Filter Instruction Manual
- June 14, 2024
- Waterdrop
Table of Contents
Waterdrop WD-C14 Water Filter
Product Information
The Replacement Filter for Coffee Machine System is designed for use with Model WD-C14. It is compatible with EN 17093 standards and has an average chlorine reduction of 86%. The filtration capacity of the filter is 100L.
Product Usage Instructions
- Take out the water tank and the filter holder. Then separate the water filter parts.
- Slot in the filter into both parts of the filter holder. You can install the assembled filter holder into the water tank by aligning the base of the filter holder with the water tank adapter. Once well positioned, push it down to lock it into place.
- Set the current month and leave the filter in cold water to soak for five minutes. Finally, remove and wash with cold water. Notice: It is best to replace the filter after 100L of use.
- Pour some cold water into the water tank until it is full. Then, slide back into position at the back of the machine. That will lock it into place.
Warning:
Avoid using microbiologically unsafe water or water with unascertained quality
to protect yourself from ingesting contaminants, which otherwise could lead to
severe injuries and
even death. This filter will only perform optimally if installed in line with
the instructions provided above. Always store your new filter in a cool, dark,
and dry place.
- Model: WD-C14
- In accordance with EN 17093 ; the Average Chlorine Reduction 86%
- Filtration Capacity : 100L
Compatibility
You can use this WD-C14 filter with Barista® SES008/810/875/880/920/980/990
coffee machines. It protects your coffee machine from scale accumulation,
which often happens on the internal parts. You only have to replace the filter
after 100L of use, reducing the need to descale your machine.
Notice: You may have a slightly different filtration capacity due to
local water quality.
Installation instructions
-
Take out the water tank and the filter holder. Then separate the water filter parts.
-
Set the current month and then leave the filter in cold water to soak for five minutes. Finally, remove and wash with cold water. Notice: It is best to replace the filter after 100L of use.
-
Slot in the filter into both parts of the filter holder. You can install the assembled filter holder into the water tank by aligning the base of the filter holder with the water tank’s adapter.
Once well positioned, push it down to lock it into place. -
Pour some cold water into the water tank until it is full. Then, slide back into position at the back of the machine. That will lock it into place.
Warning
Avoid using micro-biologically unsafe water or water with unascertained quality to protect yourself from ingesting contaminants, which otherwise could lead to severe injuries and even death. This filter will only perform optimally if installed in line with the instructions provided above. Always store your new filter in a cool, dark, and dry place.
Qingdao Ecopure Filter Co., Ltd.
Tel: 1-888-352-3558 (U.S.)
E-mail: service@waterdropfilter.com
Add.: No.13, Yishengbai Road Jimo, Qingdao, China
Made in China V003
tuv-sud.com/ps-cert