ADVWIN AF557D Air Fryer Oven User Manual

ADVWIN AF557D Air Fryer Oven

Product Information

The product is a multi-functional device that offers various features and capabilities. It is designed to provide convenience and efficiency in everyday tasks. The product has a sleek and compact design, making it suitable for use in different environments.

Product Usage Instructions

1. Ensure that the product is properly connected to a power source.
2. Press the power button to turn on the device. The power indicator light will illuminate.
3. To navigate through the menu options, use the control buttons located on the front panel of the device
4. For specific functions, refer to the user manual for detailed instructions.
5. To adjust settings, use the settings menu. You can customize various aspects of the product according to your preferences.
6. To use the product’s built-in features, such as the timer or alarm, access the corresponding menu option and follow the on-screen prompts.
7. If you encounter any issues or have questions about the product, refer to the troubleshooting section in the user manual or contact our customer support for assistance.
8. When you are finished using the product, press the power button to turn it off and unplug it from the power source.
9. Clean the product regularly using a soft cloth to remove dust and dirt.

Following these instructions will ensure proper usage and maximize the benefits of the product. Enjoy using your new multi-functional device!

IMPORTANT SAFEGUARDS AND SUGGESTIONS

Danger

• Do not immerse the power cord, plug, or housing in water or under the tap during cleaning, to avoid damage or danger.
• Avoid any liquid entering the appliance to prevent electric shock or short-circuit.
• Do not cover the air inlets, air outlets, and sockets of the appliance during working.
• When extracting food or utensils from the chamber, use a fork or wear heatproof gloves to avoid scalding.
• The appliance will get hot during operation, be careful not to touch the heating components and the inner wall of the furnace.

Warning

• Make sure that your output voltage corresponds to the voltage stated on the rating label of the appliance.
• Before using, please check the power cord of the appliance and the accessories, do not use any damage.
• Children should be supervised to ensure that they do not play with the appliance and keep it out of reach of children.
• Do not let the cord hang over the sharp edge of the table or counter or touch hot surfaces.
• Do not plug/unplug the appliance or operate the control panel with wet hands.
• Do not place or use this appliance on or near tablecloths, curtains, wallpaper, and other flammable materials to avoid burning. External power cord connection is not allowed.
• When the pot is operating at high temperature, do not put plastic dishes, bowls, protection film, or those non-resistant to high-temperature materials into it.
• The appliance should be placed on a horizontal and stable surface when used. Do not place on plastic, board, or any other hot-short, easy-wear surface.
• Do not place the appliance against a wall or another appliance, around 10cm of space is required to remain.
• Do not place anything on the top of the appliance.
• Do not use the accessories beyond the specification of this manual.
• Do not use this product in the unattended.
• During frying, hot steam is released through the air outlets. Keep your hands and face at a safe distance from the steam and the air outlets. When opening the door, take out the accessories from the chamber, do not close your face to the door to avoid scalding.
• Once cooking is done, the temperature of the accessories is very high, do not touch them.
• If the preset time is too long, the food will be burnt, smoked, and released from the air outlet.
• Plug off immediately and clean the food and grease of the frying basket, rack, bread rack, and oil receiving tray.
• After using, turn off the power button, then pull the plug from the socket, avoid directly pulling the power cord.
• The parts of the appliance will become very hot during working, please keep children away from

Caution

• Unplug from the outlet and let it cool when not in use or before cleaning.
• Do not use any accessories not provided by this machine.
• This appliance is for household use only, do not use it outdoors.
• Clean and dry the frying basket, bread rack, rack, and oil receiving tray before putting the food inside.
• There is a safety switch inside the appliance. The appliance can work normally only when the door is closed.
• Always unplug the appliance while not using it.
• If the supply cord or electrical component is damaged, it must be replaced or repaired by the manufacturer, maintenance department, or qualified professional person to avoid a hazard.
• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Make sure the children do not play with the appliance. Cleaning and maintenance shall not be done by children unless they are older than 8 and supervised.
• Keep the appliance and cord out of reach of children under eight years old.
• The appliance cannot be operated using an external timer or a separate remote control
• Be careful some surfaces may become hot during use.
• The manufacturer shall not be responsible for any improper use by the customer.

PRODUCT STRUCTURE DIAGRAM

Product Components

Intelligent control panel

PRODUCT INSTRUCTIONS

1. Place the marina name tine auton on both sides and pay attention to keep away from curtains, wall cloth, and other combustible materials.
2. Leave not less than 10 cm of space in the back and on both sides and pay attention to keeping away from curtains, wallcloth, and other combustible materials.
3. When pressing the “All” button The “ALL” menu is mainly used when there are many or heavy objects) :
4. Open the door, and push the large baking tray into the chamber (the large baking tray can be used as an oil receiving tray), the large baking tray advances along the guide slots on both sides of the inner wall. As the below pictures show:
5. Push the large rack into the guide slots on both sides of the inner wall of the chamber. As the below pictures show
6. Put the food in the large mesh basket, push the basket into the chamber, then close the door. As the below pictures show: Note:

  * Different cooking options, and different accessories.
  * Different cooking options, different menus.
  * After cooking is done, take out the baking tray, rack, or oil receiving tray with gloves.

4. When choosing the “L” or “R” button:
5. Please align the upper edge of the partition with the upper slot, push the lower edge along the lower slot until it is close to the rear wall of the inner chamber, and then put the two small baking trays into the chamber (note: the arrow on the partition faces down, indicating that the arrow points the below of the partition). As the below pictures show:
6. Open the door, and push the small baking tray into the chamber (the small baking tray can be used as an oil receiving tray), the small baking tray advances along the guide slots on both sides of the inner wall. As the below pictures show:
7. Please put one side of the two small racks into the guide slot of the side wall and the other side on the support strip of the partition. Then put the food on the small rack, put the small rack into the machine, and then close the door. As the below pictures show:
8. Please put the food into the small mesh basket, push the small mesh basket into the chamber, and then close the door. As the below pictures show:
9. When cleaning the chamber, please take out the lower slot, after cleaning, insert one side(which is the straight side) of the lower slot into the square groove on the inner wall, press the other side( which with flanging) firmly, to make sure the lower slot is tight(The back of the lower slot is placed on the inner wall of the chamber, and the front side faces the door). As the below pictures show:

Note:

• Please keep the large baking tray at the bottom to collect the oil of fried food.
• Don’t let the food exceed the maximum line, because the food may become larger after heating, depending on the actual situation.
• Only when the door is closed can the machine work properly. Otherwise, when you press the start / stop button, it will give an alarm.
• When baking food, please don’t bake the food that needs to be baked at a low temperature and the food that needs to be baked at a high temperature at the same time.

Before first use

1.  Remove all packaging materials, and place the machine on a stable horizontal surface:
2. Clean the basket and other accessories with hot water, liquid detergent, and a soft sponge:
3. Wipe the inside and outside of the appliance with a cloth.

PRODUCT OPERATION INSTRUCTIONS

Key description

• Power,
• Temperature adjustment,
• Time adjustment, ” – “
• Reduce, ” + “
• Increase, ” – ”
• Start/Pause,
• Timer,
• Rotary baking,
• “L” Left chamber,
• ”R” Right chamber,
• ”ALL” All menu {the whole chamber heating),
• ”M” Customize.

Power on
When the product is powered on, the buzzer will ring(about 0.5 seconds): the digital tube and all indicator lights will flash once and then light on, the digital screen displays “0000/0000″ and turns off after 1 second, the” ( ) ” button lights on, means it is in standby mode. When do not do any operation with standby mode for 10 minutes, the appliance will shut down automatically, If or don’t press the “ ” button after selecting the corresponding function, it also will shut down automatically within 10 minutes.

Function description

The working states after the power is turned on:

1. CD Left chamber heating, select 6 menus on the left, and there is no heating on the right, the left side of the display shows the temperature and time, while the right side does not. As the below pictures show, there are 6 menus on the left: String roast, Cake, Grilled fish, Pizza, Steak, and Bread.

2. Right chamber heating, select 7 menus on the right, and there is no heating on the left, the right side of the display shows the temperature and time, while the left side does not. As the below pictures show, there are 7 menus on the right: Wings, Bagel, Chicken, Popcorn, Heat preservation, Vegetables, and French fries.

3. Both the left and right sides are heated, select the menus on the left and right respectively: When selecting one of the six high-temperature menus on the left only one of the seven high-temperature menus, or when selecting on the right can be selected of the seven high-temperature menus on the right,  only one of the six high-temperature menus, the low temperature on the left can be selected (menus on the left and right sides are locked and will not be selected
   The display screen is separated from the middle, the left display screen displays the temperature and time of the left chamber (temperature and time display, switching once in 5 seconds), and the right display screen displays the temperature and time of the right chamber (temperature and time display, switching once in 5 seconds).

4. After selecting L or R to enter the working state, if you need to add baking food in one of the idle and inoperative chambers, just press L or R, and then select one of the high-temperature menus. The selected L or R will flash for 5 seconds at the same time with the selected menu, and then enter the working state automatically.

5. In “ALL ” mode (the whole chamber is heated), the 16 menus on the panel, the left side of the display shows the temperature and the right side shows the time

The custom (M) mode:

When choosing the “M” mode, the menu can adjust the temperature is 100 ~ 220 °C and adjust the time is 0 ~ 60min.

Automatic menu mode:
Press the corresponding chamber icon “ All ” key to enter the menu, and the 16 working menus will flash. When selecting the desired work menu, the chamber and the corresponding menu are always light on, and the other menus are not on, press the start/pause key ” ” to confirm. If you want to exit, press the menu key to exit the menu. The display shows the temperature and time under the corresponding menu.

Operating instructions

1. When the power is on for the first time, press the “ ” button, which is the standby mode, the buzzer rings once for a long time to enter the standby mode. always light on and other menu icons are off

2. Temperature setting
   Press the key ” + „- ” of the button” “to set the temperature. When adjusting the temperature, the temperature changes by 10°C with pressing the ” + ” |”- ” key for one time. If continuously press and hold (2 seconds), the temperature changes by 10 °C continuously. The highest working temperature is 220°C and the lowest working temperature is 100°C, which is cycle mode, press once and sound once, the corresponding menu icon flashes, and other menus are off. After setting the temperature for 5S, the temperature display stops flashing (or press the start key). The temperature setting can only be used in custom mode. In automatic mode, the temperature is not adjustable.

3. Time setting
   Press the key ” +”. “- ” of the button ” – TIME + “to set the time. When adjusting the time, the time changes by 1 minute with pressing the ” +” / ” – ” key for one time. If continuously press and hold (2 seconds), the time changes by 10 minutes rapidly. The longest working time is 480 minutes and the shortest working time is 1 minute, which is cycle mode.

4. Start, Pause, and Standby
   Press the start/pause key ” “, and the buzzer will ring, and the corresponding menu icon will light on. But the program does not run, and no operation within 10 minutes, the key”  “flashes and goes out after 1s. Press the start/pause key” “during working, the buzzer makes a short sound, the corresponding menu icon is light on, and the motor and heat tube doesn’t work.

5. Preheat
   In standby mode, select the function menu, adjust the time and temperature of the function menu, and press the key, at this time, the corresponding indicator light will light on press the “ ” key again, and the corresponding indicator light will light off, means the preheating function is canceled, which is a cycle. After selecting the preheating function, press the “ ” key, which means enter the preheating operation, during preheating, the indicator light flashes, and the corresponding function menu is light on.

   • After preheating is completed, entering the menu working state, the indicator light of the key lights off. The key cannot be operated during preheating.
   • When the furnace core temperature reaches the corresponding temperature of the function menu, preheating stops. At this time, the heating pipe stops working.
   • During preheating, you only can press the key to stop preheating and enter the shutdown state.
   • Choose the preheat function in any menu, the upper and lower tubes are heated at the same time during the preheating process(Preheating time is an independent time and is not included in the menu working time).
   • When entering the working state, it will work according to the default heating mode (default working time and temperature), or according to the selected heating mode(elected working time and temperature).
   • After preheating, the buzzer keeps ringing (about 0.5 seconds), at this time, open the door and put in food, after closing the door, it enters the working state directly without any operation.

6. After preheated, if don’t open the door within 1 minute, the shaded pole motor will be closed, and if there is no closing the door operation within 5 minutes, it will enter the shutdown state directly. During preheating, the two-time keys of the menu do not flash. 6) Automatic menu mode Press the corresponding chamber icon “l”, and “R”, enter the menu, and work menus flash. When selecting the desired menu, the chamber and the corresponding menu light on, but the other menu icons do not light up, press the start/ pause key” ” to confirm. To exit, press the “menu” key to exit the menu mode. The display shows the temperature and time under the corresponding menu.

7. During the reservation function, press the “ ” key, the digital screen will start, and select the required function mode. Press the preset key, which displays the time number is adjustable. When adjusting the time, each time you press the “+” or “ ” key, the time will change with 1 minute. If you hold it (2 seconds), the time will change rapidly to 10 minutes. The maximum working time is 8 hours and the minimum time is 1 minute, which is cycle mode. After the preset time is determined, press the ” ” key to start the preset function, and the preset time begins to count down. Except for the ” ” key, other keys are locked. Pressing the “ ” key can cancel the preset function.

8. In the “All” mode, select shrimp, popcorn, whole chicken, steak, or grilled fish, co%- roasted string, and the rotary indicator light turns from flashing to constant light, entering the heating state.

Menu function selection

1. We provide a combination of different cooking times and cooking temperatures to meet your different cooking needs.
2. Below is our menu combination, you can also change the cooking time and temperature according to the actual needs.

COOKING TIME AND TEMPERATURE SETTING TEMP

1. If need to reset the cooking temperature and time, can press the TIME +* key, which can adjust the cooking time and temperature.
2. When adjusting the cooking temperature, the digital screen flashes, press the «+ ” or “- ” to increase or reduce the temperature. The temperature changes by 10°C by pressing the ” + » / ” – ” key for one time. If continuously pressed and held (2 seconds), the temperature changes by 10°C continuously and rapidly.
3. When adjusting the cooking time, the digital screen flashes, press the “+” or “- ” to increase or reduce the cooking time. The time changes by 1 minute with pressing the ” + ” | “- ” key for one time. If continuously pressed and held (2 seconds), the time changes by 10 minutes rapidly.

The cooking time range is : The adjustable time of the low-temperature menu is 0 ~ 480min, and the adjustable time of the high-temperature menu is 0 ~ 60min.

RESERVATION FUNCTION
In standby mode, choose the function, adjust the working time and temperature, press the ” “Key, time digital tube display 000, then press the “+», or ” – ” to adjust the reservation time, after the finish, press the” “key to start the reservation function, the time digital tube begins to count down until the appointed time, the appliance starts working. The maximum reservation time is 560 minutes and the minimum time is 10 minutes, which is cycle mode. In the reservation state, the keys are locked except for the ” ” key, press the” ” key to cancel the reservation function and back to the standby mode.

Note : This function needs to be operated by pressing the ” ” key after selecting the menu.

PAUSE FUNCTION:
During cooking, the appliance will pause automatically once the do penned. In this case, the keys will be locked except the ” ” keys. Close the door, the appliance will continue to work.

Note : Open the door during working, the appliance will pause, if don’t close the door within 10 minutes, the appliance will enter a shutdown state, the display screen will be black, and the appliance will be in a shutdown state(it will keep a shutdown state even close the door).

Tips : During cooking, turn the food at a regular time or irregularly to help cook more evenly, and the cooking effect will be better.

Note : During cooking, the temperature of the mesh basket, rack, baking tray, and oil receiving tray is very high, and cannot be touched directly by hand.

COOKING DONE

1. When cooking is done, there will be “Di” “Di” “Di” sounds, the appliance stops working, but its fan will continue to work for 1 minute until the internal center temperature cools down.

2. Open the front door, please take out the food with insulated gloves, and put them on a safe horizontal surface.
   Note : When taking out the food from the appliance, don’t touch the food and utensil with your hands to avoid scalding.
   Tips : If the food is not good enough after cooking, just put it back into the appliance to cook more time.

3. After cooking is done, press the power button to turn off the power and unplug the power cord from the socket.

CLEANING AND MAINTENANCE

Note : Unplug from the outlet and let the appliance cool down before cleaning.

• Please clean the food tray with detergent after use.
• Wipe the appliance with a soft moist cloth.
• Don’t immerse the power cord, plug and the appliance’s body in water or other liquid, it may cause damage to the appliance, fire, electric shock, or injury to persons.
• After drying, assemble all parts, and then place them in a ventilated, dry, and non-corrosive environment for future use.

Appendix 1

CIRCUIT PRINCIPLE DIAGRAM
This product must not be disposed of together with the domestic waste. This product has to be disposed of at an authorized place for recycling of electrical and electronic appliances. By collecting and recycling waste, you help save natural resources and make sure the product is disposed of in an environmentally friendly and healthy way.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>