ADVWIN XPB46-1298S Washing Machine User Manual
- October 30, 2023
- advwin
Table of Contents
ADVWIN XPB46-1298S Washing Machine User Manual
FORTABLE WASHING MACHINE
WARNING-1
To reduce the risk of electric shock, disconnect the appliance from the power
supply before attempting any user maintenance. Turning the controls to the OFF
position does not disconnect this appliance form the power supply.
WARNING-2
Do not use this appliance to wash clothes soaked, spotted or washed in
gasoline, dry cleaning solvents or any other exposure or flammable substances
that could ignite and explode.
WARNING-3
The test programmed is “Standard”, Water Supply: Cold & Hot, Water Level: H
EER Program: Select standard wash 15 minutes, soak 30 minutes, wash 15
minutes, soak 30 minutes, wash 15 minutes, soak 20 minutes, wash 15 minutes,
soak 20 minutes, wash 15 minutes, soak 20minutes, wash 15 minutes, with 60°(
warm water and 20°) cold water, spin twice, 3 minutes each; rinse once for 15
minutes with 20° ( cold water, spin twice, 3 minutes each; Water level “H”
used for all wash and rinse.
WARNING-4
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety. Children being
supervised not to play with the appliance. If the supply cord is damaged, it
must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
The instructions for appliances connected to the water mains by detachable hose-sets shall state that the new hose-sets supplied with the appliance are to be used and that old hose-sets should not be reused.
This appliance is intended to be used in household and similar applications such as:
– staff kitchen areas in shops, offices and other working environments;
– farm houses;
– by clients in hotels, motels and other residential type environments;
– bed and breakfast type environments;
– areas for communal use in blocks of flats or in launderettes.
⚠ WARNING
To reduce the risk of fire, this appliance must be fastened or otherwise
secured to an uncovered concrete floor.
Introduction
Thank you for purchasing this Semi Auto Washing Machine. The design of this product has adopted the special patent technology of cabinet integration. The entire body casing is made of plastic and this ensures that your semi auto washing machines will never be rust eaten. The washer is relatively lighter and space saving as compared to other general twin-tub washing machines
Through the integration of new technology, this washer with large wave pulsator and new water flow, will not only produce less twisting of the clothing but also better cleaning and washing effect. The functions of water inlet, sprinkling, spin-dry and water flow are also made available to save time, labor and water usage.
We trust that you will find your purchase of this beautifully designed and dignified-looking semi auto washing machine to your satisfaction.
Technology parameter and specifications
Structure and parts of product
Washing Instructions
Preparation
- The machine should be placed on the flat ground
- The plug seat should have safety ground connection.
- Lay down the overflow hose.
- Use the water inlet hose to connect the water tap on the water inlet.
- Adjust the water level based on the type of clothing material and its weight.
- Turn on the power.
Washing
- Set the “wash & drain selector switch” according to the material type and weight of clothes.
- Set the “wash& drain selector switch” to the wash position.
- Set the “wash timer” and place the clothes into the tub, adjust the water level to the proper position and put in the proper amount of detergent into the wash tub.
- Set the “wash timer” and washing machine will start to wash .
- After wash, set the “wash & drain” selector switch to the drain position to the start draining off water.
Spinning
- After spinning, set the water inlet hose to the water inlet of the spin tub position for 20-30 seconds.
- According to the ” spin timer” process, spinning the clothes for 1min-5min, repeat once or twice.
Rinsing
- After spinning, the spin tub will stop. Open the spin cover and from the spin tub transfer the clothes to the wash tub to prepare for rinsing.
- Repeat the washing process but do not add any detergent.
Attention Points
For your own safety, ensure that the ground connection is correct.
Never put your hands into the spin tub whilst it is working.
Never wash textiles which contain volatile materials to avoid machine damage or water blockage due to stains.
The timer should always be turned clock wise
When abnormal sounds/movements occur during operation, stop the washing machine as soon as possible and check. (Please refer to troubleshooting, Page7 .)
When washing, the water temperature should be below 60 °C , Otherwise, the plastic components may be deformed.
Maintenance
After use, pull out the plug to prevent accidents.
When cleaning the washing machine use a soft cloth, this will prevent scratching of the surface of the cabinet.
Do not put the washing machine outdoors or in damp areas such as the bathroom.
Do not put heavy objects on top of the washing machine.
Do not place the washing machine near to heat-generating items such as gas cookers.
Troubleshooting
Attention : When the problem can not be resolved, please contact the Service Center.