Advwin 151300100 Wet and Dry Vacuum Cleaner Instruction Manual

Instruction Manual

SKU:151300100
Wet and Dry Vacuum Cleaner

Introduction

Thank you for purchasing Wet and dry vacuum cleaner
In order to use this product better and safer, please read this instruction manual carefully before using the product

Security warning considerations

【warning！】
Before using this product, please read all the contents of this manual carefully and install the machine according to the steps in this manual. Keep this manual properly. If you transfer the product to a third party, please attach this manual together with the machine. Any operation that is inconsistent with the instructions may cause product damage or serious personal injury. This product is only suitable for use in a regular home environment and is not suitable for industrial or outdoor use.

The product is not intended for use by persons with physical, sensory or intellectual disabilities or persons with inexperience and common sense (including children) unless supervised or instructed to ensure its safe use.
Do not touch the plug or any live part of the product with wet hands to avoid the risk of electric shock. If the charger or plug is damaged, stop using it.
Away the product from long hair, loose clothing, fingers and other parts of the body. Do not place suction tubes, accessory tips, or tools in your eyes, ears, or in your mouth.
When using, if you find leakage or motor temperature is too high and abnormal sound, such as fuselage overheating, abnormal sound, odor, weak suction, etc., should immediately stop using.
When charging, please use the charger specially equipped by our company for charging; other types of chargers may cause battery failure or extreme thermal effects.
If you do not use this product for a long time, turn off the power and unplug the charging stand.
After using the machine, please clean the sewage bucket in time to keep the ventilation path unblocked, so as to avoid the suction drop and the motor heating caused by blockage, which will affect the service life of the motor washing machine.
After using the machine, please store it in a dry place. A damp place will affect the insulation and service life of the electrical appliance.

Please regularly check the smooth condition of the suction nozzle. If there is a blockage, please clear it in time to avoid the blockage causing a drop in suction and affecting the performance of the machine.
The motor grader body and the floor brush are powered on and cannot be soaked in water or washed Please make sure to replace the roller brush after shutdown.
When the machine breaks down, do not repair it yourself, please call our after-sales department for help.

Precautions for safety

【About the scope of use of the product】

• This product is suitable for hard ground in indoor environment, including waxed floor, stone ground floor, rubber floor, marble floor, granite floor, terrazzo floor, solid wood floor, composite floor, bamboo floor and all kinds of mirror tiles, porcelain tiles and other flat ground surface. If the product is used on uneven ground surface, the best effect may not be achieved.
• Do not use this product near or on the surface of flammable and explosive objects, there is a risk of fire and explosion.
• Do not use this product near the working fireplace or heater to prevent deformation of the machine shell.
• Do not use this product in confined spaces filled with vapors from oily paints, paint thinners, or certain mothproofing substances, flammable dusts, or other explosive or toxic vapors.
• Do not smoke hot substances (unextinguished cigarette butts, matches, hot ash, etc.), ultra-fine substances (such as lime, cement, wood chips, gypsum powder, ash, charcoal, etc.), toxic substances (such as drain cleaners, ammonia, bleach), dangerous substances (such as solvents, descaler, etc.), chemical substances (such as acids, detergents, etc.), and other substances with uncertain physical properties.
• Do not use this machine to absorb detergent, kerosene, gasoline, alcohol, paint, perfume, etc., which may cause a short circuit, fire or explosion.
• Do not use this machine to suck up toner and toner used in laser printers and copiers. These objects may cause fire or explosion.
• Do not use this machine to absorb sharp objects, such as glass fragments, nails, screws, small toys, pins, paper clips, stones, plaster, large pieces of paper, etc., these objects may cause blockage and damage the Similar to shoe polish, paint, pigments and other strong grease, strong viscosity or strong dyeing stains, not in the scope of use of this product. machine.
• Do not use this machine to suck any burning or smoking objects, such as soot from unextinguished heat sources, burning cigarette butts or matches.

【About the machine】

• Do not disassemble and assemble the closed machine by yourself. There are no parts in the machine that can be repaired by the customer, and do not try to change the performance of the machine, otherwise it will cause danger.
• The use of a voltage that does not correspond to the specifications of this product will cause damage to the motor and more likely to cause injury to the user. The correct rated voltage is indicated on the nameplate.
• When cleaning stairs, extreme caution should be exercised to prevent falling.
• Do not shake the machine up and down or collide violently to prevent sewage from flowing into the motor.
• When the motor is working, please do not lift or carry the appliance up and down, and do not tilt the machine to one side or lay it flat to prevent sewage from entering the motor.
• In order to prevent tripping, the machine should be placed against the wall after use. In order to prevent children from knocking on electrical batteries.
• Do not use the clean water tank and waste tank if they are not installed correctly.
• Do not place any small objects at the air outlet, and do not block the air outlet. Take away all small objects that may hinder the smooth air flow at the air outlet to prevent the machine from overheating.
• Do not wet the fuselage, otherwise there may be fire and electric shock accidents due to short circuit of the machine.
• During battery charging, device storage, or use, ensure that the ambient temperature is between 4-40°C

【Safe disposal of discarded batteries】

• The battery installed in this machine contains materials harmful to the environment. Please call our company to seek professional after-sales service for disposal of the whole machine. Please do not modify, disassemble or try to repair the machine by yourself.
• Do not charge, disassemble, heat or incinerate discarded batteries.
• Please dispose of the waste batteries safely and properly, and do not put them into water, fire or soil.
• Please dispose of the waste batteries safely and properly, and do not put them into water, fire or soil.

Product introduction

2.1 Machine Introduction

Power button: Tap to turn on, the default is smart cleaning mode, tap again to turn off all work.
Mode switch button: default intelligent cleaning mode when starting up, and switch gears with light press: strong-dry drag-intelligent
Self-cleaning button: The whole machine is placed on the charging storage base that is connected to the power supply, and the self-cleaning function of the roller brush for 2 minutes is turned on lightly, and the cleaning is automatically turned off.

2.2 Product Overview

Product Use

This product is large in size, in order to facilitate transportation and storage, the base, handle and fuselage part of the open packaging. When the user uses it for the first time, please follow the steps below to assemble it.

3.1 Handle Installation Instructions

Insert the end of the handle into the port of the host in the vertical direction. After hearing the click, make sure that the handle is tight and not loose, that is, the installation is successful.

To disassemble, press the shrapnel with a hard object into the hole on the back of the fuselage, and pull out the handle of the machine upward at the same time.

3.2 Clean Water Tank Disassembly Instructions

Take out: Please hold the fuselage with one hand and hold the clean water tank with the other hand and lift it up slightly.

Installation: Please align the bottom of the water tank with the support position of the fuselage opening, and then buckle it down slightly, and the click will be successful.

3.3 Dirt Tank Removal/installation Instructions
Take it out: Please hold the fuselage with one hand, press the button of the waste tank with the other hand, and then pull it out.

Installation: Align the bottom of the water tank with the support position of the fuselage opening, and then push the water tank slightly. If you hear a click, you will succeed.

3.4 Removal and installation instructions of roller brush

Take out: please apply your fingers to the position as shown in the figure, press two fingers at the same time to unlock the left end of the lock, and lift it up.

Installation: Hold the handle on the left side of the roller brush by hand, align the right side of the roller brush with the right end cover first, and then put the handle on the left end of the roller brush into the groove.

3.5 Removal and installation instructions for roller brush cover

Take out: please apply your fingers to the position as shown in the figure, and press two fingers at the same time to unlock the latch and lift it up.

Installation: please align the roller brush cover with the buckle, and cover it down tightly to complete the assembly after hearing a “click.

3.6 Charging Base Description
Put the machine into the charging base, and connect one end of the charger to the socket interface at home.
You can put the power cord away without charging.
When charging, please keep the machine upright against the wall corner to avoid tripping and other hazards.

3.7 Prepare/start work
【Before use】 Please check whether the machine is fully charged, if not, please charge it in time.
【After booting】 The default intelligent cleaning file can choose the mode according to the actual use demand
【warning】 DO NOT BREATHE FOAM LIQUID

Machine default intelligent cleaning mode.
You can lightly press the mode switch key: strong → dry drag → smart.
If you need to close/open voice broadcast, you can press the mode key for 3 seconds after shutdown.

After use, it is recommended to place the machine upright on the charging storage base.

This machine comes with an upright switch, please use it obliquely after starting up. All cleaning mode functions can be opened only when the host leaves the base, and it will stop running after being put into the base upright.

3.8 Instructions for water injection of clean water tank

1. Take out the water tank, open the rotating button on the upper cover of the water tank counterclockwise, and inject clean water to the water line. If the need for deep cleaning can be added 2 caps special floor cleaning liquid can be.
2. After water filling, close the rotating button of the upper cover of the water tank clockwise to ensure that it is tight and not loose.
3. Install the clean water tank back to the fuselage, and the installation is successful when you hear a “click.

3.9 Waste Tank Pour Instructions

1. Take out the sewage tank, hold the water tank cup with one hand, and pull out the water tank cover upward with the other hand.
2. Take out the garbage separation basket and clean up the large particles of garbage Dump sewage.
3. Install the waste tank back to the fuselage, and the installation is successful with a click.

3.10 About LED Screen Display and Voice Prompts
After shutdown, press the mode switch 3S for a long time to close/open the voice broadcast function

About voice prompts and lights

Running| Working status| The default intelligent cleaning mode is when starting up. Press the mode key to switch: strong ⇾ dry drag ⇾ intelligent, and the corresponding icon will be displayed synchronously. Voice prompts are broadcast synchronously.
---|---|---
‘Dirt Tank Cleaning| If there is too much dirt, the machine will stop automatically, and the voice prompt will remind you to clean the sewage tank in time.
Water shortage in clean water tank| Voice prompt water tank is short of water.
Put in the charging
base| charging| The battery icon flashes and stops flashing when fully charged.
Self-cleaning| There will be a voice prompt when water shortage occurs during self- cleaning. If the self-cleaning conditions are met, press the self- cleaning button, and the self-cleaning indicator light flashes continuously.

Routine maintenance/maintenance

4.1 Clean the body

In order not to affect the performance of the machine, it is recommended that you regularly maintain the product parts.
Warm tips:
Before cleaning, please stop the machine and make sure it is turned off.
When scrubbing the body, be sure to wring out the cleaning cloth and do not allow water to penetrate into the electrical components of the machine.
After cleaning, it is recommended to place the whole machine upright in the storage base, be careful not to place it in direct sunlight or wet places.

4.2 Clean the waste tank

Warm tips:
When the sewage tank is full of sewage, the machine will take the initiative to shut down, and voice prompt.
When the waste tank is blocked, please dump and rinse in time.
When you find stubborn dirt on the inner wall of the waste tank, clean it directly with a cleaning brush.

4.3 Clean the dirty sensing channel

Warm tips:
After long-term use, there will be dirt in the dirty sensor channel. After removing the sewage tank, wipe the inner wall of the pipeline regularly with a damp cloth, or use the equipped cleaning brush to clean it.

4.4 Clean the pre-filter

Warm tips:
Remove the filter from the top of the waste tank, rinse it with clean water, and dry it thoroughly in the sun before use. A wet filter will cause the machine to fail to operate normally, and a new dry filter can be replaced at this time.

4.5 Clean the roller cover
Warm Tip:
It is recommended to clean the roller brush cover regularly and keep it clean.

4.6 Cleaning roller brush
Warm Tip: It is suggested that the roller brush should be self cleaning after each use to prevent mildew and odor. Roller brush removal If there is a small amount of hair entanglement can be removed  with the complimentary cleaning brush.

Troubleshooting

If you still cannot use the product normally according to the following steps, please contact the online purchase store customer service or the ITU service hotline for help.

Please charge the product in time and then use it.
Water shortage in clean water tank| Add water to the clean water tank
No dirt tank installed| Install dirt tank back to machine
Dirt tank full| Timely dumping of sewage
Hepa filter wet| Replace the dry filter in time
Machine suction weakened| Installation of roller brush, roller brush cover and waste tank is not in place| Reinstall
The roller brush is entangled by objects such as hair.| Cleaning roller brush
The product suction port is blocked| Clean the product suction port
The filter is dirty or missing| Clean up or install dry filter screen in time before use
The dirt tank is full| Remove and clean the waste tank for reuse.
After excluding the above, the situation remains| Please contact the sales service for maintenance
Have abnormal noise in the motor operation| The product suction port is blocked| Clean the product suction port
After excluding the above, the situation remains| lease contact the sales service for maintenance
Product cannot be charged| Charging socket plug not plugged in properly| Please check whether the plug is connected properly
Poor contact between charging head and charging socket| Please check whether the charging head and the charging stand are connected properly
The machine is not fully inserted into the charging storage base| Please check whether the machine is placed vertically on the storage base

Product Specifications

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>