advwin Magnetic Treadmill T09B

MAGNETIC TREADMILL
T09B2

CHART OF PRODUCT

IMPORTANT SAFETY INFORMATION

Please keep this manual in a safe place for easy reference.

1. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained, and used properly. It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions.
2. Before starting any exercise program you should consult your doctor to determine if you have any medical conditions that could put your health and safety at risk, or prevent you from using the equipment properly. Your doctor’s advice is essential if you are taking medicine that affects your heart rate, blood pressure, or cholesterol level.
3. Be aware of your body’s signals incorrect or excessive exercise can damage your health. Stop exercising if you experience any of the following symptoms: pain, tightness in your chest, irregular heartbeat, extreme shortness of breath, lightheadedness, dizziness, or feeling of nausea. If you do experience any of these conditions, you should consult your doctor before continuing with your exercise program.
4. Keep children and pets away from the equipment. The equipment is designed for adult use only.
5. Use the equipment on a solid, flat level surface with a protective cover for your floor or To ensure safety, the equipment should have at least 0.5 meters of free space all around it.
6. Before using the equipment, check that the nuts and bolts are securely tightened.
7. The safety of the equipment can only be maintained if it is regularly examined for damage and/or wear and tear.
8. Always use the equipment as indicated. If you find any defective components while assembling or checking the equipment, or if you hear any unusual noise coming to from the equipment during use, stop immediately. Do not use the equipment until the problem has been rectified.
9. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may get caught in the equipment or that may restrict or prevent movement.
10. The equipment has been tested and certified to EN957 underclass H.C. Suitable for home use only. The maximum weight of the user is 100kg. Braking ability is independent of speed.
11. The equipment is not suitable for therapeutic use.
12. Care must be taken when lifting or moving the equipment so as not to injure your back. Always use proper lifting techniques and/or seek assistance if necessary.

ASSEMBLY INSTRUCTIONS

STEP 1

Open the carton, please confirm the product accessories is complete Accessories details:

1. Handrail decorative covers 2pcs
2. Lock screw M6X40 2pcs
3. Multi-purpose wrench 1pc
4. Locknut M12X50 1pc
5. Spring locking pin 1pc
6. Magnet safety switch 1pc
7. 5 it Allen key 1pc

STEP 2
Connect the signal line and Insert the pillar which has a signal line inside into the right side base, and insert another pillar into the left side base Then use M8X60 screw locking.

STEP 3
Screw into the spring pin

STEP 4
Use M12)60 lock screw fix the handle frame on the base.

STEP 5
Adjust Control panel location, screw-in M6X40 lock screw.

STEP 6
Put the handrails on the 2 columns, with four M8X50 screws fixed respectively, and put on a handrail decorative cover on the top of screws on each handle, then, Insert the plug of signal lines into the socket

STEP 7
Put the security magnetic safety switch into the panel yellow area.

STEP 8
Carryout

FOLDING FOR STORAGE

Please follow the PIC 1, screws out the big screw that fixed the base and handrail, and follow the PIC 2,pls pull the “spring screws” which was fixed on the handrail pole gently, and then release “spring screws”.

Belt Adjustment

Your treadmill belt has been adjusted at the factory but each user has a tendency to be “Right” or “Left” footed. If the belt moves to either side, it needs to be adjusted. There are two adjustment bolts at the rear of the unit (see PIC.3). Tighten by half a turn the bolt on the side towards which the belt has shifted and correspondingly loosen the bolt on the other side. Rotate the belt smoothly to ensure that it is correctly centered-if not, repeat the adjustment.

Maintenance
The belt may be cleaned with mild soap and water. Be sure to remove any excess water after cleaning. Clean the running board under the belt periodically with a household furniture polish. After cleaning, a small amount of silicone spray (available from motor shops)should be placed on the surface of the running board to allow the belt to slide more easily.

CONTROL PANEL

Function Instruction

1. Insert the plug, put the safety key into the contro) peel the power switch, full-screen display 1 second after the beep sound to enter standby.
2. In the manual standby mode initially: SPEED display 0.0 ; Eithiplay 0:00; CAL display 1; DIST display 0.0; CAL display 0;
3. In the manual standby mode, press the MODE key, you creatively selected the mode: normal, preset time or preset distance. If choose count up tinphaydig : ” flash display; and count down, display the static status. A. According to the normal, the time and distance aredamtitap, when the time to 60 minutes, it stops. B. According to the present time, the original time is 31:h01 site speed can be adjusted from 5:00 to 99:00, and the time count is down until 0, the machine stop. C. According to the preset distance, the original distahalisjou can adjust the speed from 0.50-1.00-1.50—99.5, each additional distance is 0.5km, RIMtint down until O.
4. In the standby mode, click the program key, its P1-Pqamagram for choice, the time will show by count down, original time is 30: 00, you can adjust the time5f00—99:00 by speed +/- key.
5. In the standby mode, all of the shortcut key are useleskfttiE stop key, all will come back to manual standby status.
6. When running all mode, it must behave 3 seconds count(Saied display), and a buzzer for 3seconds. In this mode, the mode key and program key are invalid.
7. In manual operation mode, you can adjust the speed fretfineriginal is 1.0, you also can choose the speed (2KM, 4KM, 6KM, 8KM, and 10KM) by speed shortcut key.
8. In automatic mode, the speed button “+/-” and the speettlatrare also effective, and all auto-mode is 20 sequences shot The details of automatic reedecidendum.
9. In automatic mode, the machine will buzz 3 seconds eallitoMpt the user.
10. In the running status, press the “stop’ key, the motorduitb the speed until stopped, and the mode into manual standby, every motion parameter keep remains et. the user watches conveniently.
11. When the safety key/device left the control panel, the window show ” – “. others all have t show.
12. In standby mode or protected mode, with no operation continuously 10 minutes, the machine will turn off the display to sleep. In sleep mode, press any key (protection switch must be closed) or to detect the heartbeat, the machine into standby immediately shows the initial.

EXERCISE COMPUTER
FUNCTION BUTTON
MODE
PRESS TO SELECT FUNCTIONS PRESET. OR HOLD ON CAN BE TOTAL RESET FOR ALL FUNCTION VALUES.

FUNCTIONS
SCAN

AUTOMATICALLY SCAN THROUGH EACH MODE IN SEQUENCE FOR EVERY 5 SECONDS.

TIME       ACCUMULATES TOTAL WORKING TIME UP TO 30: 00.
SPEED    ACCUMULATES THE CURRENT SPEED.
DISTANCE  ACCUMULATES TOTAL WORKING DISTANCE UP TO 99.99KM
CALORIE     ACCUMULATES CALORIES CONSUMPTION DURING EXERCISE, MAX VALUE IS 9999 CAL. (THIS DATA IS A ROUGH GUIDE FOR COMPARISON OF DIFFERENT EXERCISE SESSIONS WHICH CAN NOT BE USED IN MEDICAL TREATMENT)

NOTE

1. WITHOUT ANY OF SIGNAL FOR 4 MINUTES, THE LCD DISPLAY WILL SHUT OFF AUTOMATICALLY.
2. TURN ON THE MONITOR BY PRESSING THE BUTTON.
3. STOP EXERCISE TO PRESS MODE FOR SELECTING EACH FUNCTION.

TROUBLESHOOTING

Computer, not waticlna correctly
If your computer is not working correctly, please check whether the computer sensor wire is plugged into the computer. If you have checked the above and the computer is still not working, then please make sure the Magnetic Switch is still working and that they are installed correctly in the computer.

Technical Specification Product

Name: Treadmill
Rated Voltage: -220 V
Rated Frequency:60Hz
Rated Power: 1000W

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>