PROSTER TL017-PST Anemometer Handheld Instructions

: June 14, 2024
: Proster

Table of Contents

FUNCTION
LCD DISPLAY
Operation
Specification
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

TL017-PST Anemometer Handheld
Instructions

FUNCTION

Air Velocity & Temperature Measurement ;
Max/Average/Current air velocity measurement;
‘C/’F Temperature unit selection;
Five units of air velocity: M/s, Km/h, ft/min, Knots, mph
Beaufort scale;
Backlight display;
Manual/Auto power shut off;
Wind chill indication;
Low battery indication.

LCD DISPLAY

PROSTER TL017-PST Anemometer Handheld - LCD Display

Operation

Turn on: Press “MODE” button for 2 seconds to turn on the unit. LCD will display Air velocity, temperature and battery icon. LCD backlight will last for 12 seconds.
Set unit of air velocity and measuring mode: Press “MODE” button more than 3 seconds until “m/s“ starts to blink. Press “SET” button to select desired alr velocity unit. To confirm the unit, press “MODE” button. For setting MAX/AVG/CU mode, press “SET” button again and again until CU/MAX/AVG blink, then press “MODE” button to confirm.
1). The setting will be stored when turn off the unit. But If you change the battery, the setting will go back to the factory preset.
2). Unit of Air velocity: m/s, Km/hr, ftimin, Knots, mph
3). Measuring mode: CU: current air velocity MAX: max air velocity AVG: average air velocity
Set temperature unit:
Temperature switch key (“C/’F) conceal in the rear cabinet, please use a little push-pin to press the key for ‘C/’F conversion.
Backlight display: The backlight will be activated for 12 seconds by press any key
Mesurement: when the wind vane (impeller) turns, LCD will instant display wind speed, temperature and. beaufort scale. When temperature below 0 °C, “WIND CHILL” will be shown on the LCD.
Turn off: Press “MODE” + “SET” buttons at the same time to turn off the unit.
Auto power shut off: The unit will be shut off without any operation for 14 minutes.
Change battery: When the symbol” 4shown on the LCD, please change the battery.

Specification

A. Air velocity

Unit| Range| Resolution| Threshold| Accuracy
M/s| 0-30| 0.1| 0.1| ±5%
Ft/min| 0-5860| 19| 39
Knots| 0-55| 0.2| 0.1
Km/h r| 0-90| 0.3| 0.3
Mph| 0-65 02| 0.2
B.Temperature
Unit| Range| Resolution| Accuracy
°C| -10°C – +45°C| 2| +2°C
°F| 14°F-113° F| 0.36| ±3.6° F
Battery| CR2032 3.0V (Included)
Thermometer| NTC thermometer
Operating temperature| -10°C— +45°C(14°F-113° F)
Operating humidity| Less than 90%RH
Store temperature| -40°C-+60°C(-40°F-140° F)
Current consumption| Approx. 3mA
Weight| 52g
Dimension| 40x18x105mm